DragonFly On-Line Manual Pages
FvwmTheme(1) FVWM Modules FvwmTheme(1)
FvwmTheme - an FVWM module for managing the appearance of FVWM and its
ModuleSynchronous Timeout 5 FvwmTheme
FvwmTheme can only be invoked by fvwm. Command line invocation of the
FvwmTheme module will not work.
FvwmTheme creates appearance resources that may be shared by FVWM and
other modules. It reads an initial configuration and also reacts to
configuration commands and messages sent from FVWM so that the
resources can be dynamically changed.
Starting with 2.5.1, FvwmTheme is obsolete, please read fvwm man page
about the built-in colorsets solution. However, all options are still
the same, so this man page defines the exact Colorset syntax.
FvwmTheme must be spawned as a module by fvwm.
It is highly suggested that FvwmTheme is invoked before any other
modules that use the colorsets provided by FvwmTheme. Thus FvwmTheme
has to be invoked with the 'ModuleSynchronous' command by inserting the
line 'ModuleSynchronous Timeout 5 FvwmTheme' in the .fvwm2rc file right
after the ImagePath has been defined. Invoking FvwmTheme from the
InitFunction, StartFunction or RestartFunction or later can cause
excessive redrawing of already running modules. It is highly suggested
that the configuration lines for FvwmTheme appear in the configuration
file before FvwmTheme is started. You can find a proper sample fvwm
setup at the end of this document. It is pointless to run more than
one FvwmTheme so there is no provision for using an alias name.
FvwmTheme supports some configuration options.
*FvwmTheme: Colorset n options
Creates or modifies colorset n. Each colorset has four colors,
an optional pixmap and an optional shape mask. The four colors
are used by modules as the foreground, background, highlight and
shadow colors. When a colorset is created it defaults to a
foreground of black and background of gray. The background and
foreground are marked as "average" and "contrast" (see later) so
that just specifying a pixmap or gradient gives sensible
Warning: The highest colorset number used determines memory
consumption. Thus if you define 'Colorset 100000', the memory
for 100001 colorsets is used. Keep your colorset numbers as
small as possible.
options is a comma separated list containing some of the
keywords: fg, Fore, Foreground, bg, Back, Background, hi,
Hilite, Hilight, sh, Shade, Shadow, fgsh, Pixmap, TiledPixmap,
AspectPixmap, Transparent, RootTransparent, Shape, TiledShape,
AspectShape, NoShape, ?Gradient, Tint, fgTint, bgTint, Alpha,
fgAlpha, Dither, NoDither, IconTint, IconAlpha, NoShape and
fg, Fore and Foreground take a color name as an argument and set
the foreground color. The special name Contrast may be used to
select a color that contrasts well with the background color.
To reset the foreground color to the default value you can
simply omit the color name.
bg, Back and Background take a color name as an argument and set
the background color. It also sets the highlight and shadow
colors to values that give a 3d effect unless these have been
explicitly set with the options below. The special name Average
may be used to select a color that is the average color of the
pixmap. If the pixmap is tinted with the Tint option, the tint
is not taken in account in the computation of the average color.
You should use the bgTint option to get the "real" average
color. The background color is reset to the default value if
the color name is omitted.
hi, Hilite and Hilight take a color name as an argument and set
the highlight color. If the highlight color is not explicitly
set, the default is to calculate it from the background color.
To switch back to the default behavior the color name can be
sh, Shade and Shadow take a color name as an argument and set
the shadow color. If the shadow color is not explicitly set,
the default is to calculate it from the background color. To
switch back to the default behavior the color name can be
fgsh takes a color name as an argument and sets the color used
by the shadowing font effect. See the FONT SHADOW EFFECTS
section of the fvwm man page. By default this color is computed
from the foreground and background colors. To switch back to
the default the color name can be omitted.
Pixmap, TiledPixmap and AspectPixmap take a file name as an
argument, search the ImagePath and use it as the background
pixmap. Any transparent parts are filled with the background
color. Not specifying a file name removes any existing one from
the colorset. TiledPixmap produces repeated copies of the image
with no scaling, Pixmap causes the image to be stretched to fit
whatever object the colorset is applied to and AspectPixmap
stretches to fit but retains the image aspect ratio.
Transparent tries to create a transparent background pixmap.
The pixmap may be used as a window background to achieve root
transparency. For this you should use the ParentalRelativity
fvwm style. The root background change may be detected or not,
this depends on the program used to set the background. If you
use fvwm-root, xsetbg (xli), FvwmBacker with a solid or a
colorset colors or a recent version of Esetroot (>= 9.2) a
background change should be detected. If background changes are
not detected (e.g., if you use xv or xsetroot) you can force
detection by using the -d option of fvwm-root:
xv -root -quit mybg.png; fvwm-root -d
Due to the way X implements transparency no guarantees can be
made that the desired effect can be achieved. The application
may even crash. If you experience any problems with this
option, do not use it.
Using outline move and resize (see the OpaqueMoveSize command
and the ResizeOpaque style) as well as setting the
WindowShadeShrinks style may help. The transparency achieved
with Transparent depends on whether the colorset is applied to
the foreground or the background of a window. In the second case
the transparency is relative to the parent window of the window
on which the colorset is defined. For example:
Colorset 12 VGradient 200 grey30 grey60
Colorset 17 Transparent
*FvwmIconMan: Colorset 12
*FvwmIconMan: PlainColorset 17
gives an IconMan with a vertical grey gradient background and
the buttons use the background (by transparency). To obtain a
(root) transparent IconMan:
Colorset 12 Transparent
Colorset 17 Transparent
Colorset 18 Transparent
Colorset 19 Transparent
*FvwmIconMan: Colorset 12
*FvwmIconMan: PlainColorset 17
*FvwmIconMan: FocusColorset 18
*FvwmIconMan: IconColorset 19
The Colorset IconMan option defines the IconMan window
background, but the PlainColorset and the FocusColorset are
drawn on the foreground. So, the transparency of the IconMan
buttons is achieved by drawing nothing. Now if this IconMan is
swallowed in an FvwmButtons as:
FvwmButtons:(Colorset 10, Swallow "FvwmIconMan" 'FvwmIconMan')
then, IconMan become a child of FvwmButtons and it is
transparent relative to FvwmButtons. So, in this case IconMan
uses Colorset 10 as background. If you want root transparency
use the RootTransparent option. FvwmButtons, FvwmIconMan,
FvwmIdent, FvwmScroll and FvwmTaskBar are relatively simple.
There is one main colorset option which defines the background
of the window and the other colorsets (if any) are drawn on the
foreground. The case of FvwmWinList and FvwmProxy are simpler.
With FvwmWinList all the colorsets are drawn on the foreground
and with FvwmProxy the two colorsets refer to the window
backgrounds. FvwmPager is more complicated as almost everything
in the pager are windows with some parental relations (the mini
windows are the child and the desktops are the parents and all
this is complicated by the hilighted page). So, the colorsets
apply to the background of these windows. You should experiment.
For FvwmForm and FvwmScript the situation is similar. There is
a main window (a child of the root window) which corresponds to
the main colorset and most of the widgets are windows which are
children of the main window. Tint may work or not with the
Transparent option. When the colorset is drawn on the foreground
Tint should work. In the other cases, tinting works in some
exceptional cases (and may be very slow). Tinting may work with
fvwm menu (without animation). In the other case tinting may
work if your X server has backing store enabled (try xdpyinfo to
see if this the case). But, there is a chance that the backing
store support of your X server does not work well with the
terrible hack used to Tint the ParentRelative Pixmap. So, to get
tinted root transparency it is more safe to use the
RootTransparent [ buffer ] creates a root transparent
background. To make this option work, you must use an Esetroot
compatible program, fvwm-root with the --retain-pixmap option or
FvwmBacker with the RetainPixmap option (and colorset or solid
backgrounds). The buffer keyword is useful only when the Tint
option is used too. This speeds up creation of windows which use
the colorset (useful for fvwm menus) at the cost of memory
usage. It also speeds up opaque move and resize which can be
unacceptably slow without buffer. However, this option may add
a lot of memory to your X server (depending on the size of the
image used to set the background). In summary, using outline
move and resize for modules which use such a colorset may be a
Shape, TiledShape and AspectShape take a file name as an
argument, search the ImagePath and use it as the shape bitmap.
TiledShape produces repeated copies of the bitmap with no
scaling, Shape causes the bitmap to be stretched to fit whatever
object the colorset is applied to and AspectShape stretches to
fit but retains the bitmap aspect ratio. If the file is a
pixmap in xpm format, the shape mask of the pixmap is used.
Warning: Due to the way X11 implements shapes and the
implementation of the FvwmTheme module you cannot take back
making windows shaped. You may have to restart fvwm or the
?Gradient ... creates a pixmap and stretches it to fit the
window. ?Gradient may be one of HGradient, VGradient,
DGradient, BGradient, SGradient, CGradient, RGradient or
YGradient. The gradient types are as follows: H is horizontal;
V is vertical; D is diagonal from top left to bottom right; B is
a backwards diagonal from bottom left to top right; S is
concentric squares; C is concentric circles; R is a radar like
pattern and Y is a Yin Yang style (but without the dots, we are
not that mad). Please refer to the COLOR GRADIENTS section in
the fvwm man page for the syntax of gradients.
Tint takes 2 arguments, a color and a percentage between 0 and
100. It causes the image defined using ?Pixmap or ?Gradient to
be tinted with the specified color using the percentage. If the
image is transparent Tint tints only the image part.
Unfortunately, a colorset background specified using the
Transparent option can give strange results. See the Transparent
option for details. With no arguments this option removes the
fgTint takes 2 arguments, a color and a percentage between 0 and
100. It causes the color defined using fg to be tinted with the
specified color using the percentage. With no arguments this
option removes the tint.
bgTint takes 2 arguments, a color and a percentage between 0 and
100. It causes the color defined using bg to be tinted with the
specified color using the percentage. If the sh and hi colors
are not specified, they are recomputed from the tinted bg color.
With no arguments this option removes the tint.
Alpha takes a percentage between 0 and 100 as an argument. It
causes fvwm to merge the image defined using ?Pixmap or
?Gradient with the bg color using the percentage. If the
percentage is 0 the image is hidden and if it is 100 the image
is displayed as usual (no merge). The default is 100 and it is
restored if no argument is given.
fgAlpha takes a percentage between 0 and 100 as an argument. It
causes fvwm to merge the text and the colorset background using
the percentage. If the percentage is 0 the text is hidden and if
it is 100 the text is displayed as usual (no merge). This
option has an effect only with fonts loaded by Xft, see the FONT
NAMES AND FONT LOADING section of fvwm man page. The default is
100 and it is restored if no argument is given.
Dither causes fvwm to dither the image defined using ?Pixmap or
?Gradient. This is useful only with displays with depth less
than or equal to 16 (i.e., on displays which can only display
less than 65537 colors at once). The dithering effect lets you
simulate having more colors available that you actually have.
NoDither causes fvwm to do not dither the images. Dither is the
default if the depth is less than or equal to 8 (a screen with
256 colors or less). In depth 15 (32768 colors) and 16 (65536
colors), the default is NoDither, however this effect can be
useful with images which contain a lot of close colors. For
example a fine gradient will look more smooth.
IconTint takes 2 arguments, a color and a percentage between 0
and 100. It causes fvwm or a module to tint the "icons" which
are rendered into the colorset background with the specified
color using a percentage. Here "icons" means, fvwm Icons, fvwm
menu icons, MiniIcons which represent applications in various
modules, images loaded by modules (e.g., images specified by the
Icon FvwmButtons button option) ...etc. With no arguments this
option removes the icon tint.
IconAlpha takes a percentage between 0 and 100 as an argument.
It causes fvwm to merge the "icons" which are rendered into the
colorset background using this percentage. The default is 100
and it is restored if no argument is given.
Note: It is equivalent to use "Tint a_color rate" and "Alpha a"
if a = 100 and the bg color is a_color. This equivalence does
not hold for IconAlpha and IconTint as the background can be an
image or a gradient (and not a uniform color background).
However, in some cases you can achieve (almost) the same effect
by using IconTint in the place of IconAlpha. This is preferable
as, in general, IconAlpha generates more redrawing than
NoShape removes the shape mask from the colorset while Plain
removes the background pixmap or gradient.
The following fvwm command may be executed at any time to alter the
colorsets. It may be bound to a menu item or typed into a module such
SendToModule FvwmTheme Colorset options
The syntax is the same as the configuration option.
*FvwmTheme: Colorset 3 fg wheat, bg navy
If necessary this creates colorsets 0, 1, 2 and 3 and then changes
colorset 3 to have a foreground of wheat, a background of navy.
*FvwmTheme: Colorset 3 bg "navy blue"
changes the background color of colorset 3 to navy blue. The foreground
and pixmap are unchanged.
*FvwmTheme: Colorset 3 AspectPixmap large_murky_dungeon.xpm
*FvwmTheme: Colorset 3 bg Average
Sets the background color and the relief colors to match the background
pixmap. This is the default setting but it must be used if a background
color was specified and is now not required.
*FvwmTheme: Colorset 3 YGradient 200 3 \
blue 1000 navy 1 blue 1000 navy
Adds a Yin Yang gradient background pixmap to colorset 3. If the
background is set to average it is recomputed along with the foreground
if that is set to contrast.
FvwmCommand "SendToModule FvwmTheme Colorset 7 fg navy, bg gray"
FvwmCommand "SendToModule FvwmTheme Colorset 7 fg gray"
FvwmCommand "SendToModule FvwmTheme Colorset 7 fg navy"
Makes colorset 7 blink.
The color names used in colorsets can be substituted in any fvwm
command. Please refer to the COMMAND EXPANSION section in the fvwm man
page and the example below for a description.
SAMPLE FVWM CONFIGURATION
Below you can find a fvwm configuration file that demonstrates the use
of the FvwmTheme module. The order in which FvwmTheme and the other
modules are configured and started is important.
# where your images are
ImagePath <put your image path here>
# The FvwmTheme setup must be first in the config file,
# right after the paths are set.
# Instead of the *FvwmTheme: Colorset... lines below you
# could read in a file with these commands. So to change
# your color scheme you can simply copy a different file
# over your palette file and restart fvwm:
# Read /home/my_user_name/.fvwm/.fvwm_palette
# 0 = Default colors
# 1 = Inactive windows
# 2 = Active windows
# 3 = Inactive menu entry and menu background
# 4 = Active menu entry
# 5 = greyed out menu entry (only bg used)
# 6 = module foreground and background
# 7 = hilight colors
*FvwmTheme: Colorset 0 fg black, bg rgb:b4/aa/94
*FvwmTheme: Colorset 1 fg black, bg rgb:a1/b2/c8
*FvwmTheme: Colorset 2 fg black, bg rgb:da/9a/68
*FvwmTheme: Colorset 3 fg black, bg rgb:b4/aa/94, \
VGradient 100 dtcolor5 rgb:b4/aa/94
*FvwmTheme: Colorset 4 fg black, bg rgb:b4/aa/94
*FvwmTheme: Colorset 5 fg rgb:d2/bf/a8, \
*FvwmTheme: Colorset 6 fg black, bg rgb:b4/aa/94, \
VGradient 100 dtcolor5 rgb:b4/aa/94
*FvwmTheme: Colorset 7 fg black, bg rgb:94/ab/bf
# run FvwmTheme before anything else is done
ModuleSynchronous Timeout 5 FvwmTheme
# general setup
Style * Colorset 1
Style * HilightColorset 2
MenuStyle * MenuColorset 3
MenuStyle * ActiveColorset 4
MenuStyle * GreyedColorset 5
+ I Exec exec xterm -fg $[fg.cs0] -bg $[bg.cs0]
# module setup
# ... more FvwmPager config lines ...
*FvwmPager: Colorset * 6
*FvwmPager: BalloonColorset * 6
*FvwmPager: HilightColorset * 7
*FvwmPager: WindowColorsets 1 2
# ... more FvwmIconMan config lines ...
*FvwmIconMan: Colorset 6
*FvwmIconMan: FocusColorset 2
*FvwmIconMan: FocusAndSelectColorset 2
*FvwmIconMan: PlainColorset 6
*FvwmIconMan: SelectColorset 6
*FvwmIconMan: TitleColorset 6
# ... more FvwmButtons config lines ...
*FvwmButtons: Colorset 6
# sample button passing color to xterm
*FvwmButtons: (Title xterm, \
Action "Exec exec xterm -fg $[fg.cs6] -bg[bg.cs6]")
# ... more FvwmWharf config lines ...
*FvwmWharf: Colorset 6
# ... more FvwmIdent config lines ...
*FvwmIdent: Colorset 6
# ... more FvwmWinList config lines ...
*FvwmWinList: Colorset 1
*FvwmWinList: FocusColorset 2
*FvwmWinList: IconColorset 1
# ... more FvwmTaskBar config lines ...
*FvwmTaskBar: Colorset 6
*FvwmTaskBar: IconColorset 6
*FvwmTaskBar: TipsColorset 0
If you need to have more colors and don't want to reinvent the wheel,
you may use the convention used in fvwm-themes, it defines the meaning
of the first 40 colorsets for nearly all purposes:
Initialization of fvwm, FvwmTheme and the other modules is tricky.
Please pay close attention to the text in the INVOCATION section. The
example above demonstrates the proper way to get a FvwmTheme setup
Prefers to remain anonymous. With help from Brad Giaccio and Dominik
Copyright (C) 1999 Joey Shutup. No guarantees or warranties or
anything are provided or implied in any way whatsoever. Use this
program at your own risk. Permission to use this program for any
purpose is given, as long as the copyright is kept intact.
3rd Berkeley Distribution (not released yet) (2.5.20) FvwmTheme(1)