DragonFly On-Line Manual Pages
XGetWindowProperty(3) XLIB FUNCTIONS XGetWindowProperty(3)
XGetWindowProperty, XListProperties, XChangeProperty,
XRotateWindowProperties, XDeleteProperty - obtain and change window
int XGetWindowProperty(Display *display, Window w, Atom property, long
long_offset, long long_length, Bool delete, Atom req_type, Atom
*actual_type_return, int *actual_format_return, unsigned long
*nitems_return, unsigned long *bytes_after_return, unsigned char
Atom *XListProperties(Display *display, Window w, int
int XChangeProperty(Display *display, Window w, Atom property, Atom
type, int format, int mode, unsigned char *data, int nelements);
int XRotateWindowProperties(Display *display, Window w, Atom
properties, int num_prop, int npositions);
int XDeleteProperty(Display *display, Window w, Atom property);
Returns the actual format of the property.
Returns the atom identifier that defines the actual type of
Returns the number of bytes remaining to be read in the
property if a partial read was performed.
data Specifies the property data.
delete Specifies a Boolean value that determines whether the
property is deleted.
display Specifies the connection to the X server.
format Specifies whether the data should be viewed as a list of
8-bit, 16-bit, or 32-bit quantities. Possible values are 8,
16, and 32. This information allows the X server to
correctly perform byte-swap operations as necessary. If the
format is 16-bit or 32-bit, you must explicitly cast your
data pointer to an (unsigned char *) in the call to
Specifies the length in 32-bit multiples of the data to be
Specifies the offset in the specified property (in 32-bit
quantities) where the data is to be retrieved.
mode Specifies the mode of the operation. You can pass
PropModeReplace, PropModePrepend, or PropModeAppend.
nelements Specifies the number of elements of the specified data
Returns the actual number of 8-bit, 16-bit, or 32-bit items
stored in the prop_return data.
num_prop Specifies the length of the properties array.
Returns the length of the properties array.
Specifies the rotation amount.
Returns the data in the specified format. If the returned
format is 8, the returned data is represented as a char
array. If the returned format is 16, the returned data is
represented as a array of short int type and should be cast
to that type to obtain the elements. If the returned format
is 32, the property data will be stored as an array of longs
(which in a 64-bit application will be 64-bit values that are
padded in the upper 4 bytes).
property Specifies the property name.
Specifies the array of properties that are to be rotated.
req_type Specifies the atom identifier associated with the property
type or AnyPropertyType.
type Specifies the type of the property. The X server does not
interpret the type but simply passes it back to an
application that later calls XGetWindowProperty.
w Specifies the window whose property you want to obtain,
change, rotate or delete.
The XGetWindowProperty function returns the actual type of the
property; the actual format of the property; the number of 8-bit,
16-bit, or 32-bit items transferred; the number of bytes remaining to
be read in the property; and a pointer to the data actually returned.
XGetWindowProperty sets the return arguments as follows:
o If the specified property does not exist for the specified window,
XGetWindowProperty returns None to actual_type_return and the
value zero to actual_format_return and bytes_after_return. The
nitems_return argument is empty. In this case, the delete
argument is ignored.
o If the specified property exists but its type does not match the
specified type, XGetWindowProperty returns the actual property
type to actual_type_return, the actual property format (never
zero) to actual_format_return, and the property length in bytes
(even if the actual_format_return is 16 or 32) to
bytes_after_return. It also ignores the delete argument. The
nitems_return argument is empty.
o If the specified property exists and either you assign
AnyPropertyType to the req_type argument or the specified type
matches the actual property type, XGetWindowProperty returns the
actual property type to actual_type_return and the actual property
format (never zero) to actual_format_return. It also returns a
value to bytes_after_return and nitems_return, by defining the
N = actual length of the stored property in bytes
(even if the format is 16 or 32)
I = 4 * long_offset
T = N - I
L = MINIMUM(T, 4 * long_length)
A = N - (I + L)
The returned value starts at byte index I in the property
(indexing from zero), and its length in bytes is L. If the value
for long_offset causes L to be negative, a BadValue error results.
The value of bytes_after_return is A, giving the number of
trailing unread bytes in the stored property.
If the returned format is 8, the returned data is represented as a char
array. If the returned format is 16, the returned data is represented
as a short array and should be cast to that type to obtain the
elements. If the returned format is 32, the returned data is
represented as a long array and should be cast to that type to obtain
XGetWindowProperty always allocates one extra byte in prop_return (even
if the property is zero length) and sets it to zero so that simple
properties consisting of characters do not have to be copied into yet
another string before use.
If delete is True and bytes_after_return is zero, XGetWindowProperty
deletes the property from the window and generates a PropertyNotify
event on the window.
The function returns Success if it executes successfully. To free the
resulting data, use XFree.
XGetWindowProperty can generate BadAtom, BadValue, and BadWindow
The XListProperties function returns a pointer to an array of atom
properties that are defined for the specified window or returns NULL if
no properties were found. To free the memory allocated by this
function, use XFree.
XListProperties can generate a BadWindow error.
The XChangeProperty function alters the property for the specified
window and causes the X server to generate a PropertyNotify event on
that window. XChangeProperty performs the following:
o If mode is PropModeReplace, XChangeProperty discards the previous
property value and stores the new data.
o If mode is PropModePrepend or PropModeAppend, XChangeProperty
inserts the specified data before the beginning of the existing
data or onto the end of the existing data, respectively. The type
and format must match the existing property value, or a BadMatch
error results. If the property is undefined, it is treated as
defined with the correct type and format with zero-length data.
If the specified format is 8, the property data must be a char array.
If the specified format is 16, the property data must be a short array.
If the specified format is 32, the property data must be a long array.
The lifetime of a property is not tied to the storing client.
Properties remain until explicitly deleted, until the window is
destroyed, or until the server resets. For a discussion of what
happens when the connection to the X server is closed, see section 2.6.
The maximum size of a property is server dependent and can vary
dynamically depending on the amount of memory the server has available.
(If there is insufficient space, a BadAlloc error results.)
XChangeProperty can generate BadAlloc, BadAtom, BadMatch, BadValue, and
The XRotateWindowProperties function allows you to rotate properties on
a window and causes the X server to generate PropertyNotify events. If
the property names in the properties array are viewed as being numbered
starting from zero and if there are num_prop property names in the
list, then the value associated with property name I becomes the value
associated with property name (I + npositions) mod N for all I from
zero to N - 1. The effect is to rotate the states by npositions places
around the virtual ring of property names (right for positive
npositions, left for negative npositions). If npositions mod N is
nonzero, the X server generates a PropertyNotify event for each
property in the order that they are listed in the array. If an atom
occurs more than once in the list or no property with that name is
defined for the window, a BadMatch error results. If a BadAtom or
BadMatch error results, no properties are changed.
XRotateWindowProperties can generate BadAtom, BadMatch, and BadWindow
The XDeleteProperty function deletes the specified property only if the
property was defined on the specified window and causes the X server to
generate a PropertyNotify event on the window unless the property does
XDeleteProperty can generate BadAtom and BadWindow errors.
BadAlloc The server failed to allocate the requested resource or
BadAtom A value for an Atom argument does not name a defined Atom.
BadValue Some numeric value falls outside the range of values accepted
by the request. Unless a specific range is specified for an
argument, the full range defined by the argument's type is
accepted. Any argument defined as a set of alternatives can
generate this error.
BadWindow A value for a Window argument does not name a defined Window.
Xlib - C Language X Interface
X Version 11 libX11 1.6.8 XGetWindowProperty(3)