DragonFly On-Line Manual Pages

Search: Section:  

ATOMIC(9)	      DragonFly Kernel Developer's Manual	     ATOMIC(9)


atomic_add, atomic_clear, atomic_cmpset, atomic_fetchadd, atomic_load, atomic_readandclear, atomic_set, atomic_subtract, atomic_store -- atomic operations


#include <sys/types.h> #include <machine/atomic.h> void atomic_add_[acq_|rel_]<type>(volatile <type> *p, <type> v); void atomic_clear_[acq_|rel_]<type>(volatile <type> *p, <type> v); int atomic_cmpset_[acq_|rel_]<type>(volatile <type> *dst, <type> old, <type> new); <type> atomic_fetchadd_<type>(volatile <type> *p, <type> v); <type> atomic_load_acq_<type>(volatile <type> *p); <type> atomic_readandclear_<type>(volatile <type> *p); void atomic_set_[acq_|rel_]<type>(volatile <type> *p, <type> v); void atomic_subtract_[acq_|rel_]<type>(volatile <type> *p, <type> v); void atomic_store_rel_<type>(volatile <type> *p, <type> v);


Each of the atomic operations is guaranteed to be atomic in the presence of interrupts. They can be used to implement reference counts or as building blocks for more advanced synchronization primitives such as mutexes. Types Each atomic operation operates on a specific type. The type to use is indicated in the function name. The available types that can be used are: cpumask CPU mask (cpumask_t) int unsigned integer long unsigned long integer ptr unsigned integer the size of a pointer 32 unsigned 32-bit integer For example, the function to atomically add two integers is called atomic_add_int(). Certain architectures also provide operations for types smaller than ``int''. char unsigned character short unsigned short integer 8 unsigned 8-bit integer 16 unsigned 16-bit integer These must not be used in MI code because the instructions to implement them efficiently may not be available. Memory Barriers Memory barriers are used to guarantee the order of data accesses in two ways. First, they specify hints to the compiler to not re-order or opti- mize the operations. Second, on architectures that do not guarantee ordered data accesses, special instructions or special variants of instructions are used to indicate to the processor that data accesses need to occur in a certain order. As a result, most of the atomic opera- tions have three variants in order to include optional memory barriers. The first form just performs the operation without any explicit barriers. The second form uses a read memory barrier, and the third variant uses a write memory barrier. The second variant of each operation includes a read memory barrier. This barrier ensures that the effects of this operation are completed before the effects of any later data accesses. As a result, the opera- tion is said to have acquire semantics as it acquires a pseudo-lock requiring further operations to wait until it has completed. To denote this, the suffix ``_acq'' is inserted into the function name immediately prior to the ``_<type>'' suffix. For example, to subtract two integers ensuring that any later writes will happen after the subtraction is per- formed, use atomic_subtract_acq_int(). The third variant of each operation includes a write memory barrier. This ensures that all effects of all previous data accesses are completed before this operation takes place. As a result, the operation is said to have release semantics as it releases any pending data accesses to be completed before its operation is performed. To denote this, the suffix ``_rel'' is inserted into the function name immediately prior to the ``_<type>'' suffix. For example, to add two long integers ensuring that all previous writes will happen first, use atomic_add_rel_long(). A practical example of using memory barriers is to ensure that data accesses that are protected by a lock are all performed while the lock is held. To achieve this, one would use a read barrier when acquiring the lock to guarantee that the lock is held before any protected operations are performed. Finally, one would use a write barrier when releasing the lock to ensure that all of the protected operations are completed before the lock is released. Multiple Processors The current set of atomic operations do not necessarily guarantee atomic- ity across multiple processors. To guarantee atomicity across proces- sors, not only does the individual operation need to be atomic on the processor performing the operation, but the result of the operation needs to be pushed out to stable storage and the caches of all other processors on the system need to invalidate any cache lines that include the affected memory region. Semantics This section describes the semantics of each operation using a C like notation. atomic_add(p, v) *p += v; The atomic_add() functions are not implemented for the type ``cpumask''. atomic_clear(p, v) *p &= ~v; atomic_cmpset(dst, old, new) if (*dst == old) { *dst = new; return 1; } else { return 0; } The atomic_cmpset() functions are not implemented for the types ``char'', ``short'', ``8'', and ``16''. atomic_fetchadd(p, v) tmp = *p; *p += v; return tmp; The atomic_fetchadd() functions are only implemented for the types ``int'', ``long'' and ``32'' and do not have any variants with memory barriers at this time. atomic_load(addr) return (*addr) The atomic_load() functions are only provided with acquire memory barri- ers. atomic_readandclear(addr) temp = *addr; *addr = 0; return (temp); The atomic_readandclear() functions are not implemented for the types ``char'', ``short'', ``ptr'', ``8'', ``16'', and ``cpumask'' and do not have any variants with memory barriers at this time. atomic_set(p, v) *p |= v; atomic_subtract(p, v) *p -= v; The atomic_subtract() functions are not implemented for the type ``cpumask''. atomic_store(p, v) *p = v; The atomic_store() functions are only provided with release memory barri- ers.


The atomic_cmpset() function returns the result of the compare operation. The atomic_fetchadd(), atomic_load(), and atomic_readandclear() functions return the value at the specified address.


The atomic_add(), atomic_clear(), atomic_set(), and atomic_subtract() operations were first introduced in FreeBSD 3.0. This first set only supported the types ``char'', ``short'', ``int'', and ``long''. The atomic_cmpset(), atomic_load(), atomic_readandclear(), and atomic_store() operations were added in FreeBSD 5.0. The types ``8'', ``16'', ``32'', and ``ptr'' and all of the acquire and release variants were added in FreeBSD 5.0 as well. The atomic_fetchadd() operations were added in FreeBSD 6.0. DragonFly 4.7 June 13, 2012 DragonFly 4.7

Search: Section: