DragonFly On-Line Manual Pages
MOUNTD(8) DragonFly System Manager's Manual MOUNTD(8)
mountd -- service remote NFS mount requests
mountd [-2dlnr] [-h bindip] [-p port] [exportsfile ...]
Mountd is the server for NFS mount requests from other client machines.
It listens for service requests at the port indicated in the NFS server
specification; see Network File System Protocol Specification, RFC 1094,
Appendix A and NFS: Network File System Version 3 Protocol Specification,
The following options are available:
-2 Allow the administrator to force clients to use only the version
2 NFS protocol to mount filesystems from this server.
-d Output debugging information.
Specify specific IP addresses to bind to for TCP and UDP
requests. This option may be specified multiple times. If no -h
option is specified, mountd will bind to INADDR_ANY. Note that
when specifying IP addresses with -h, mountd will automatically
add 127.0.0.1 and if IPv6 is enabled, ::1 to the list.
-l Cause all succeeded mountd requests to be logged.
-n Allow non-root mount requests to be served. This should only be
specified if there are clients such as PC's, that require it. It
will automatically clear the vfs.nfs.nfs_privport sysctl flag,
which controls if the kernel will accept NFS requests from
reserved ports only.
Force mountd to bind to the specified port, for both AF_INET and
AF_INET6 address families. This is typically done to ensure that
the port which mountd binds to is a known quantity which can be
used in firewall rulesets. If mountd cannot bind to this port,
an appropriate error will be recorded in the system log, and the
daemon will then exit.
-r Allow mount RPCs requests for regular files to be served.
Although this seems to violate the mount protocol specification,
some diskless workstations do mount requests for their swapfiles
and expect them to be regular files. Since a regular file cannot
be specified in /etc/exports, the entire file system in which the
swapfiles resides will have to be exported with the -alldirs
Specify an alternate location for the exports file. There can
many exports files.
When mountd is started, it loads the export host addresses and options
into the kernel using the mount(2) system call. After changing the
exports file, a hangup signal should be sent to the mountd daemon to get
it to reload the export information. After sending the SIGHUP (kill -s
HUP `cat /var/run/mountd.pid`), check the syslog output to see if mountd
logged any parsing errors in the exports file.
If mountd detects that the running kernel does not include NFS support,
it will attempt to load a loadable kernel module containing NFS code,
using kldload(8) by way of vfsload(3). If this fails, or no NFS KLD was
available, mountd exits with an error.
/etc/exports the list of exported filesystems
/var/run/mountd.pid the pid of the currently running mountd
/var/db/mountdtab the current list of remote mounted filesystems
nfsstat(1), exports(5), kldload(8), nfsd(8), rpcbind(8), showmount(8)
The mountd utility first appeared in 4.4BSD.
DragonFly 4.7 December 1, 2014 DragonFly 4.7