DragonFly BSD
DragonFly bugs List (threaded) for 2004-08
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: pciconf -lv returns device not configured & pauze when booting on HP LP1000r

From: "Martin P. Hellwig" <mhellwig@xxxxxxxxx>
Date: Tue, 10 Aug 2004 11:31:28 +0200

YONETANI Tomokazu wrote:
On Mon, Aug 09, 2004 at 12:01:38AM +0200, Martin P. Hellwig wrote:

The second strange is that when I do a pciconf -lv it returns this:
pciconf: /dev/pci: Device not configured

I'm seeing this on a Netfinity 6000R, and it's something to do
with PCI code in acpica5. Can you add the following line to
and reboot to see if pciconf work again?


Sorry I read this when I was reinstalling my system with 1.0A.
However I have cvsupped to the latest current (using the default gcc).
And build a new GENERIC, the behaviour is still the same though, here is the report.

Debug break in the boot at:

acpi0: <HP HWPS213> on motherboard
AcpiOSDerivedPciId: bus 0 dev 15 func 0
installed MI handler for int 9
Debugger("Executed AML Breakpoint opcode")
Stopped at      Debugger+0x35:  movb    $0,in_Debugger.348

typing continue fully boots the system.

After boot, pciconv -lv returns:
pciconf: /dev/pci: Device not configured

Adding debug.acpi.disabled=pci to loader.conf and reboot
Still breaks boot into debug but pciconf -lv works now (thanks for the tip).

There are 2 noticable delays (break not counted) when starting up:
ata1: mask=03 ostat0=a0 ostat2=b0
it delays for 32 seconds (timed it)
and after
sym1: Downloading SCSI SCRIPTS.
11 seconds, but I think this one is normal.

I made a new system output under:

-- mph

[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]