DragonFly bugs List (threaded) for 2007-06
DragonFly BSD
DragonFly bugs List (threaded) for 2007-06
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: burncd error


From: Joe Talbott <josepht@xxxxxxxxxx>
Date: Thu, 14 Jun 2007 14:11:30 -0400
Mail-followup-to: Matthew Dillon <dillon@apollo.backplane.com>, bugs@crater.dragonflybsd.org

On Thu, Jun 14, 2007 at 11:01:43AM -0700, Matthew Dillon wrote:
> 
> :The non-zero LBA is due to me trying this command several times on the
> :same blank disk.  I am assuming that this is not causing the problem
> :and don't want to waste a bunch of disks testing this out.  If this
> :could be causing my problem let me know and I'll try a brand new blank
> :disk.
> :
> :..
> :Thanks,
> :Joe
> 
>     Mmm.  Bad assumption.  Try a new disk, and put it in test mode so it
>     doesn't actually write to the CD (so you don't wind up hucking too
>     many of them into the trash).  That's -t to burncd.
> 

Same error with a brand new blank disk and using -t.

josepht@tin$ sudo burncd -vt  -s 10 -f /dev/acd0 data
~/tar-files/Minix-IDE-3.1.2a.iso 
Password:
adding type 0x08 file /home/josepht/tar-files/Minix-IDE-3.1.2a.iso
size 417792 KB 208896 blocks 
next writeable LBA 0
addr = 0 size = 427819008 blocks = 208896
writing from file /home/josepht/tar-files/Minix-IDE-3.1.2a.iso size
417792 KB
written this track 1120 KB (0%) total 1120 KB
only wrote -1 of 32768 bytes err=5

Joe



[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]