DragonFly bugs List (threaded) for 2008-11
DragonFly BSD
DragonFly bugs List (threaded) for 2008-11
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Problems with a SATA DVD burner


From: "Steve O'Hara-Smith" <steve@xxxxxxxxxx>
Date: Sat, 1 Nov 2008 21:43:05 +0000

	Hi,

	My trusty (well not so trusty) DVD burner started acting up
(intermittently refusing to eject or load) so I had to pick up a
replacement, the only one available locally at a sane price was a SATA unit
so with a promise that I could return it I bought it and put it in my
workstation box and booted DragonFly.

	As soon as the atapicam driver got to it an interrupt storm started
and the livelock went on, and off and on and off and ... well you get the
idea - 80% CPU utilisation in interrupt. A little research suggested DMA
problems as a possible cause - setting hw.ata.atapi_dma=0 in loader.conf
didn't help.

	More research suggested a problem with having both atapicd and
atapicam loaded, so I built a kernel without atapicd. That got rid of the
livelock and the burner worked. Then I remembered that DMA was off so I
reenabled that and rebooted, the livelock promptly came back.

	I haven't tried atapicd with DMA, but as far as I know there's no
software that will write a DVD through atapicd so that's not really an
option.

	Relevant bits of verbose boot dmesg are very odd as they seem to
show that two devices are on ata4 one of them a UDMA133 hard disc, the
other the SATA DVD burner.

	For now it's usable but not ideal, does anyone have any suggestions
as to how I might go about getting DMA working for this drive ?

Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 2.1.0-PREVIEW #51: Sat Nov  1 18:26:23 GMT 2008
    root@df1.marelmo.com:/usr/obj/usr/src/sys/DF1_NATA
Calibrating clock(s) ... TSC clock: 2002632654 Hz, i8254 clock: 1193227 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.58-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x10ff0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500000<NX,AMIE,LM,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 1610285056 (1572544K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x005ef000 - 0x5ff9ffff, 1603997696 bytes (391601 pages)
avail memory = 1552437248 (1516052K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x31
pnpbios: Found PnP BIOS data at 0xc00f5b30
pnpbios: Entry = f0000:689a  Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/boot/kernel" at 0xc05c2000.
Preloaded elf module "/boot/modules/ubt.ko" at 0xc05c2218.
Preloaded elf module "/boot/modules/netbt.ko" at 0xc05c22c4.
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
ACPI: RSDP @ 0x0xfa7c0/0x0021 (v  2 ACPIAM)
ACPI: XSDT @ 0x0x5ffb0100/0x0034 (v  1 A M I  OEMXSDT  0x10000506 MSFT 0x00000097)
ACPI: FACP @ 0x0x5ffb0290/0x00F4 (v  3 A M I  OEMFACP  0x10000506 MSFT 0x00000097)
ACPI: DSDT @ 0x0x5ffb03f0/0x3A3E (v  1  A0036 A0036001 0x00000001 MSFT 0x0100000D)
ACPI: FACS @ 0x0x5ffc0000/0x0040
ACPI: OEMB @ 0x0x5ffc0040/0x003F (v  1 A M I  OEMBIOS  0x10000506 MSFT 0x00000097)
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=02821106)
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f59b0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    1    A   0x01  3 4 5 7 10 11 14 15
embedded    0    1    B   0x02  3 4 5 7 10 11 14 15
embedded    0   17    C   0x03  3 4 5 7 10 11 14 15
embedded    0   15    A   0x01  3 4 5 7 10 11 14 15
embedded    0   15    B   0x02  3 4 5 7 10 11 14 15
embedded    0   15    C   0x03  3 4 5 7 10 11 14 15
embedded    0   15    D   0x05  3 4 5 7 10 11 14 15
embedded    0   16    A   0x01  3 4 5 7 10 11 14 15
embedded    0   16    B   0x02  3 4 5 7 10 11 14 15
embedded    0   16    C   0x03  3 4 5 7 10 11 14 15
embedded    0   16    D   0x05  3 4 5 7 10 11 14 15
slot 1      0   11    A   0x01  3 4 5 7 10 11 14 15
slot 1      0   11    B   0x02  3 4 5 7 10 11 14 15
slot 1      0   11    C   0x03  3 4 5 7 10 11 14 15
slot 1      0   11    D   0x05  3 4 5 7 10 11 14 15
slot 2      0   12    A   0x02  3 4 5 7 10 11 14 15
slot 2      0   12    B   0x03  3 4 5 7 10 11 14 15
slot 2      0   12    C   0x05  3 4 5 7 10 11 14 15
slot 2      0   12    D   0x01  3 4 5 7 10 11 14 15
slot 3      0   13    A   0x03  3 4 5 7 10 11 14 15
slot 3      0   13    B   0x05  3 4 5 7 10 11 14 15
slot 3      0   13    C   0x01  3 4 5 7 10 11 14 15
slot 3      0   13    D   0x02  3 4 5 7 10 11 14 15
slot 4      0   14    A   0x05  3 4 5 7 10 11 14 15
slot 4      0   14    B   0x01  3 4 5 7 10 11 14 15
slot 4      0   14    C   0x02  3 4 5 7 10 11 14 15
slot 4      0   14    D   0x03  3 4 5 7 10 11 14 15
slot 5      0    9    A   0x01  3 4 5 7 10 11 14 15
slot 5      0    9    B   0x02  3 4 5 7 10 11 14 15
slot 5      0    9    C   0x03  3 4 5 7 10 11 14 15
slot 5      0    9    D   0x05  3 4 5 7 10 11 14 15
embedded    0    7    A   0x01  3 4 5 7 10 11 14 15
embedded    0   10    A   0x02  3 4 5 7 10 11 14 15
embedded    0    8    A   0x03  3 4 5 7 10 11 14 15
acpi0.nexus0.root0
acpi0: <A M I OEMXSDT> [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu0: switching to generic Cx mode
cpu0: <ACPI CPU> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
acpi_button1.acpi0.nexus0.root0
acpi_button1: <Sleep Button> [tentative] on acpi0
acpi_button1: <Sleep Button> [attached!] on acpi0
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
atkbd0.atkbdc0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0065
psm0: failed to reset the aux device.
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: irq maps: 0 0 0 0
sio0.acpi0.nexus0.root0
sio0 [tentative] port 0x2f8-0x2ff irq 3 on acpi0
sio0: type 16550A
sio0 [attached!] port 0x2f8-0x2ff irq 3 on acpi0
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: irq maps: 0 0 0 0
sio1.acpi0.nexus0.root0
sio1 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
sio1 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <A M I OEMXSDT> [attached!] at irq 9 on motherboard
sched_ithd: stray interrupt 7 on cpu 0
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
	map[10]: type 1, range 32, base d0000000, size 28
found->	vendor=0x1106, dev=0x0282, revid=0x00
	bus=0, slot=0, func=0
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1106, dev=0x1282, revid=0x00
	bus=0, slot=0, func=1
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1106, dev=0x2282, revid=0x00
	bus=0, slot=0, func=2
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1106, dev=0x3282, revid=0x00
	bus=0, slot=0, func=3
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1106, dev=0x4282, revid=0x00
	bus=0, slot=0, func=4
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1106, dev=0x7282, revid=0x00
	bus=0, slot=0, func=7
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1106, dev=0xb188, revid=0x00
	bus=0, slot=1, func=0
	class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
	map[10]: type 1, range 32, base fb600000, size 11
	map[14]: type 1, range 32, base 00008400, size  7
found->	vendor=0x1106, dev=0x3044, revid=0x80
	bus=0, slot=7, func=0
	class=[SERIALBUS]0c-00-10, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base 00009400, size  6
	map[14]: type 1, range 32, base 00009000, size  4
	map[18]: type 1, range 32, base 00008800, size  7
	map[1c]: type 1, range 32, base fb800000, size 12
	map[20]: type 1, range 32, base fb700000, size 17
found->	vendor=0x105a, dev=0x3373, revid=0x02
	bus=0, slot=8, func=0
	class=[STORAGE]01-04-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=5
	map[10]: type 1, range 32, base fba00000, size 14
	map[14]: type 1, range 32, base 00009800, size  8
found->	vendor=0x11ab, dev=0x4320, revid=0x13
	bus=0, slot=10, func=0
	class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base 0000a400, size  5
	map[14]: type 1, range 32, base 0000a000, size  7
found->	vendor=0x1412, dev=0x1724, revid=0x01
	bus=0, slot=12, func=0
	class=[MULTIMEDIA]04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base e7e00000, size 12
found->	vendor=0x109e, dev=0x036e, revid=0x11
	bus=0, slot=14, func=0
	class=[MULTIMEDIA]04-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=7
	map[10]: type 1, range 32, base e7f00000, size 12
found->	vendor=0x109e, dev=0x0878, revid=0x11
	bus=0, slot=14, func=1
	class=[MULTIMEDIA]04-80-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=7
	map[10]: type 1, range 32, base 0000c400, size  3
	map[14]: type 1, range 32, base 0000c000, size  2
	map[18]: type 1, range 32, base 0000b800, size  3
	map[1c]: type 1, range 32, base 0000b400, size  2
	map[20]: type 1, range 32, base 0000b000, size  4
	map[24]: type 1, range 32, base 0000a800, size  8
found->	vendor=0x1106, dev=0x3149, revid=0x80
	bus=0, slot=15, func=0
	class=[STORAGE]01-04-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=10
	map[20]: type 1, range 32, base 0000fc00, size  4
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=15, func=1
	class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=255
	map[20]: type 1, range 32, base 0000c800, size  5
found->	vendor=0x1106, dev=0x3038, revid=0x81
	bus=0, slot=16, func=0
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[20]: type 1, range 32, base 0000d000, size  5
found->	vendor=0x1106, dev=0x3038, revid=0x81
	bus=0, slot=16, func=1
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[20]: type 1, range 32, base 0000d400, size  5
found->	vendor=0x1106, dev=0x3038, revid=0x81
	bus=0, slot=16, func=2
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=10
	map[20]: type 1, range 32, base 0000d800, size  5
found->	vendor=0x1106, dev=0x3038, revid=0x81
	bus=0, slot=16, func=3
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=10
	map[10]: type 1, range 32, base fbc00000, size  8
found->	vendor=0x1106, dev=0x3104, revid=0x86
	bus=0, slot=16, func=4
	class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=c, irq=5
found->	vendor=0x1106, dev=0x3227, revid=0x00
	bus=0, slot=17, func=0
	class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1022, dev=0x1100, revid=0x00
	bus=0, slot=24, func=0
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1022, dev=0x1101, revid=0x00
	bus=0, slot=24, func=1
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1022, dev=0x1102, revid=0x00
	bus=0, slot=24, func=2
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1022, dev=0x1103, revid=0x00
	bus=0, slot=24, func=3
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
agp0.pci0.pcib0.legacypci0.nexus0.root0
agp0: <VIA K8T800Pro host to PCI bridge> [tentative] mem 0xd0000000-0xdfffffff at device 0.0 on pci0
agp0: 1 Miscellaneous Control unit(s) found.
agp0: allocating GATT for aperture of size 256M
agp0: <VIA K8T800Pro host to PCI bridge> [attached!] mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> [tentative] at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xe000-0xefff
pcib1:   memory decode     0xfbd00000-0xfbffffff
pcib1:   prefetched decode 0xe8000000-0xfaffffff
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
	map[10]: type 1, range 32, base e8000000, size 27
	map[14]: type 1, range 32, base 0000e000, size  8
	map[18]: type 1, range 32, base fbe00000, size 16
found->	vendor=0x1002, dev=0x5964, revid=0x01
	bus=1, slot=0, func=0
	class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base f0000000, size 27
	map[14]: type 1, range 32, base fbf00000, size 16
found->	vendor=0x1002, dev=0x5d44, revid=0x01
	bus=1, slot=0, func=1
	class=[DISPLAY]03-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
drm0.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
drm0: <ATI Radeon RV280 9200 SE> [tentative] port 0xe000-0xe0ff mem 0xfbe00000-0xfbe0ffff,0xe8000000-0xefffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized radeon 1.28.0 20060524
drm0: <ATI Radeon RV280 9200 SE> [attached!] port 0xe000-0xe0ff mem 0xfbe00000-0xfbe0ffff,0xe8000000-0xefffffff irq 11 at device 0.0 on pci1
pci1: <ATI model 5d44 graphics accelerator> (vendor=0x1002, dev=0x5d44) at 0.1
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> [attached!] at device 1.0 on pci0
fwohci0.pci0.pcib0.legacypci0.nexus0.root0
fwohci0: <VIA Fire II (VT6306)> [tentative] port 0x8400-0x847f mem 0xfb600000-0xfb6007ff irq 11 at device 7.0 on pci0
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 16 -> 16.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:a9:12:8f
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xf800a202 -> 0xf800a202
fwohci0: fwohci_set_intr: 1
firewire0.fwohci0.pci0.pcib0.legacypci0.nexus0.root0
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
sbp0.firewire0.fwohci0.pci0.pcib0.legacypci0.nexus0.root0
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
sbp_attach (cold=1)
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
fwe0.firewire0.fwohci0.pci0.pcib0.legacypci0.nexus0.root0
fwe0: <Ethernet over FireWire> [tentative] on firewire0
fwe0: bpf attached
fwe0: MAC address: 02:e0:18:a9:12:8f
fwe0: <Ethernet over FireWire> [attached!] on firewire0
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
5c88b000 OUTL ST2 ALL ALL    12 00000000 5c88b080 8411:0008 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
fwohci0: <VIA Fire II (VT6306)> [attached!] port 0x8400-0x847f mem 0xfb600000-0xfb6007ff irq 11 at device 7.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Promise PDC20378 SATA150 controller> [tentative] port 0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem 0xfb700000-0xfb71ffff,0xfb800000-0xfb800fff irq 5 at device 8.0 on pci0
pci0: child atapci0 requested type 4 for rid 0x20, but the BAR says it is a memio
ata2.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci0
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 239372MB <Maxtor 6Y250M0 YAR51HW0> at ata2-master SATA150
ad4: 490234752 sectors [486344C/16H/63S] 16 sectors/interrupt 1 depth queue
ata2: <ATA channel 0> [attached!] on atapci0
ata3.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci0
ata3: SATA connect status=00000000
ata3: <ATA channel 1> [attached!] on atapci0
ata4.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata4: <ATA channel 2> [tentative] on atapci0
ata4: reset tp1 mask=03 ostat0=50 ostat1=00
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
bus_explore done
sbp_post_explore
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad8: setting PIO4 on PDC20378 chip
ad8: setting UDMA133 on PDC20378 chip
ad8: 117246MB <Maxtor 6Y120P0 YAR41BW0> at ata4-master UDMA133
ad8: 240121728 sectors [238216C/16H/63S] 16 sectors/interrupt 1 depth queue
ata4: <ATA channel 2> [attached!] on atapci0
atapci0: <Promise PDC20378 SATA150 controller> [attached!] port 0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem 0xfb700000-0xfb71ffff,0xfb800000-0xfb800fff irq 5 at device 8.0 on pci0
skc0.pci0.pcib0.legacypci0.nexus0.root0
skc0: <Marvell Yukon 88E8001/8003/8010> [tentative] port 0x9800-0x98ff mem 0xfba00000-0xfba03fff irq 10 at device 10.0 on pci0
sk0.skc0.pci0.pcib0.legacypci0.nexus0.root0
sk0: <Marvell Yukon Lite rev.A3 (0x7)> [tentative] on skc0
miibus0.sk0.skc0.pci0.pcib0.legacypci0.nexus0.root0
miibus0: <MII bus> [tentative] on sk0
e1000phy0.miibus0.sk0.skc0.pci0.pcib0.legacypci0.nexus0.root0
e1000phy0: <Marvell Semiconductor 88E1011 Gigabit PHY> [tentative] on miibus0
e1000phy0: 1000baseT-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX, 10baseTX, auto
e1000phy0: <Marvell Semiconductor 88E1011 Gigabit PHY> [attached!] on miibus0
miibus0: <MII bus> [attached!] on sk0
sk0: bpf attached
sk0: MAC address: 00:11:2f:ba:bb:ee
sk0: <Marvell Yukon Lite rev.A3 (0x7)> [attached!] on skc0
skc0: <Marvell Yukon 88E8001/8003/8010> [attached!] port 0x9800-0x98ff mem 0xfba00000-0xfba03fff irq 10 at device 10.0 on pci0
pcm0.pci0.pcib0.legacypci0.nexus0.root0
pcm0: <Envy24HT-S audio (Chaintech AV710)> [tentative] port 0xa000-0xa07f,0xa400-0xa41f irq 10 at device 12.0 on pci0
pcm0: system configuration
  SubVendorID: 0x1412, SubDeviceID: 0x1724
  XIN2 Clock Source: 24.576MHz(96kHz*256)
  MPU-401 UART(s) #: not implemented
  ADC #: 1
  DAC #: 3
  Multi-track converter type: I2S(with volume, 192KHz support, 24bit resolution, ID#0x4)
  S/PDIF(IN/OUT): 0/1 ID# 0x00
  GPIO(mask/dir/state): 0xff0000/0xff0000/0xff0000
pcm0: Mixer "vol":
pcm0: Mixer "treble":
pcm0: Mixer "synth":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "mix":
pcm0: <Envy24HT-S audio (Chaintech AV710)> [attached!] port 0xa000-0xa07f,0xa400-0xa41f irq 10 at device 12.0 on pci0
bktr0.pci0.pcib0.legacypci0.nexus0.root0
bktr0: <BrookTree 878> [tentative] mem 0xe7e00000-0xe7e00fff irq 7 at device 14.0 on pci0
brooktree0: PCI bus latency is 64.
bktr0: buffer size 3555328, addr 0x5000000
bktr0: GPIO is 0x00ffffff
bktr0: subsystem 0x11bd 0x0012
bktr0: MT2032: Companycode=3cbf Part=60 Revision=60
bktr0: MT2032 not found or unknown type
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
bktr0: <BrookTree 878> [attached!] mem 0xe7e00000-0xe7e00fff irq 7 at device 14.0 on pci0
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 14.1 irq 7
atapci1.pci0.pcib0.legacypci0.nexus0.root0
atapci1: <VIA 6420 SATA150 controller> [tentative] port 0xa800-0xa8ff,0xb000-0xb00f,0xb400-0xb403,0xb800-0xb807,0xc000-0xc003,0xc400-0xc407 irq 10 at device 15.0 on pci0
ata5.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata5: <ATA channel 0> [tentative] on atapci1
ata5: SATA connect time=0ms
ata5: reset tp1 mask=01 ostat0=50 ostat1=00
ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 286168MB <Seagate ST3300622AS 3.AAE> at ata5-master SATA150
ad10: 586072368 sectors [581421C/16H/63S] 16 sectors/interrupt 1 depth queue
ata5: <ATA channel 0> [attached!] on atapci1
ata6.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata6: <ATA channel 1> [tentative] on atapci1
ata6: SATA connect time=0ms
ata6: reset tp1 mask=01 ostat0=00 ostat1=00
ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ata6: <ATA channel 1> [attached!] on atapci1
atapci1: <VIA 6420 SATA150 controller> [attached!] port 0xa800-0xa8ff,0xb000-0xb00f,0xb400-0xb403,0xb800-0xb807,0xc000-0xc003,0xc400-0xc407 irq 10 at device 15.0 on pci0
atapci2.pci0.pcib0.legacypci0.nexus0.root0
atapci2: <VIA 8237 UDMA133 controller> [tentative] port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0.atapci2.pci0.pcib0.legacypci0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci2
atapci2: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci2: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: <ATA channel 0> [attached!] on atapci2
ata1.atapci2.pci0.pcib0.legacypci0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci2
atapci2: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci2: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
ata1: <ATA channel 1> [attached!] on atapci2
atapci2: <VIA 8237 UDMA133 controller> [attached!] port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhci0: <VIA 83C572 USB controller> [tentative] port 0xc800-0xc81f irq 11 at device 16.0 on pci0
uhci0: LegSup = 0x8030
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
usb0: <VIA 83C572 USB controller> [tentative] on uhci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <VIA 83C572 USB controller> [attached!] on uhci0
uhci0: <VIA 83C572 USB controller> [attached!] port 0xc800-0xc81f irq 11 at device 16.0 on pci0
uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhci1: <VIA 83C572 USB controller> [tentative] port 0xd000-0xd01f irq 11 at device 16.1 on pci0
uhci1: LegSup = 0x8030
usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
usb1: <VIA 83C572 USB controller> [tentative] on uhci1
usb1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <VIA 83C572 USB controller> [attached!] on uhci1
uhci1: <VIA 83C572 USB controller> [attached!] port 0xd000-0xd01f irq 11 at device 16.1 on pci0
uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhci2: <VIA 83C572 USB controller> [tentative] port 0xd400-0xd41f irq 10 at device 16.2 on pci0
uhci2: LegSup = 0x8030
usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
usb2: <VIA 83C572 USB controller> [tentative] on uhci2
usb2: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub2.usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <VIA 83C572 USB controller> [attached!] on uhci2
uhci2: <VIA 83C572 USB controller> [attached!] port 0xd400-0xd41f irq 10 at device 16.2 on pci0
uhci3.pci0.pcib0.legacypci0.nexus0.root0
uhci3: <VIA 83C572 USB controller> [tentative] port 0xd800-0xd81f irq 10 at device 16.3 on pci0
uhci3: LegSup = 0x8030
usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
usb3: <VIA 83C572 USB controller> [tentative] on uhci3
usb3: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <VIA 83C572 USB controller> [attached!] on uhci3
uhci3: <VIA 83C572 USB controller> [attached!] port 0xd800-0xd81f irq 10 at device 16.3 on pci0
ehci0.pci0.pcib0.legacypci0.nexus0.root0
ehci0: <VIA VT6202 USB 2.0 controller> [tentative] mem 0xfbc00000-0xfbc000ff irq 5 at device 16.4 on pci0
ehci0: Dropped interrupts workaround enabled
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: (null) (null) (null) (null)
intr 5 at 40001/40000 hz, livelocked limit engaged!
usb4.ehci0.pci0.pcib0.legacypci0.nexus0.root0
usb4: <VIA VT6202 USB 2.0 controller> [tentative] on ehci0
usb4: USB revision 2.0
uhub4.usb4.ehci0.pci0.pcib0.legacypci0.nexus0.root0
uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb4
uhub4: 8 ports with 8 removable, self powered
uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb4
usb4: <VIA VT6202 USB 2.0 controller> [attached!] on ehci0
ehci0: <VIA VT6202 USB 2.0 controller> [attached!] mem 0xfbc00000-0xfbc000ff irq 5 at device 16.4 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=1106 device=3227)> [tentative] at device 17.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=1106 device=3227)> [attached!] at device 17.0 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
atkbdc-: atkbdc0 exists, using next available unit number
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 a7 5f 4f 4f 83 55 99 
ac 1f 00 4f 0d 0e 00 00 07 80 92 08 8f 28 1f 8f 
ad a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 a7 5f 4f 4f 83 55 99 
ac 1f 00 4f 0d 0e 00 00 07 80 92 08 8f 28 1f 8f 
ad a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio2 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio3 [tentative] failed to probe at port 0x2f8 irq 3 on isa0
sio4: not probed (disabled)
sio5: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
ukbd0.uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/13.10, addr 2> [tentative] on uhub0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/13.10, addr 2> [attached!] on uhub0
ums0.uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/13.10, addr 2> [tentative] on uhub0
ums0: 5 buttons and Z dir.
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/13.10, addr 2> [attached!] on uhub0
uhub5.uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhub5: <vendor 0x0451 product 0x2046, class 9/0, rev 1.10/1.25, addr 3> [tentative] on uhub0
uhub5: 4 ports with 4 removable, self powered
uhub5: <vendor 0x0451 product 0x2046, class 9/0, rev 1.10/1.25, addr 3> [attached!] on uhub0
uscanner0.uhub5.uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
uscanner0: <EPSON Perfection1240, class 255/255, rev 1.00/1.04, addr 4> [tentative] on uhub5
uscanner0: <EPSON Perfection1240, class 255/255, rev 1.00/1.04, addr 4> [attached!] on uhub5
ulpt0.uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
ulpt0: <Hewlett-Packard DeskJet 970C, class 0/0, rev 1.00/1.00, addr 2> [tentative] on uhub1
ulpt0: using bi-directional mode
ulpt0: <Hewlett-Packard DeskJet 970C, class 0/0, rev 1.00/1.00, addr 2> [attached!] on uhub1
ubt0.uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
ubt0: <vendor 0x0e5e product 0x6622, class 224/1, rev 1.10/1.34, addr 3> [tentative] on uhub1
ubt0: <vendor 0x0e5e product 0x6622, class 224/1, rev 1.10/1.34, addr 3> [attached!] on uhub1
BIOS Geometries:
 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
(probe0:ata4:0:0:0): error 22
(probe0:ata4:0:0:0): Unretryable Error
(probe1:ata6:0:0:0): error 22
(probe1:ata6:0:0:0): Unretryable Error
pfsync0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
faith0: bpf attached
pflog0: bpf attached
(probe8:ata6:0:0:0): error 6
(probe8:ata6:0:0:0): Unretryable Error
(probe7:ata4:0:0:0): error 22
(probe7:ata4:0:0:0): Unretryable Error
(probe8:ata6:0:0:0): error 22
(probe8:ata6:0:0:0): Unretryable Error
intr 5 at 1/20000 hz, livelock removed
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
pass0 at ata4 bus 0 target 0 lun 0
pass0: <TSSTcorp CDDVDW SH-S223F SB00> Removable CD-ROM SCSI-0 device 
pass0: 3.300MB/s transfers
pass1 at ata6 bus 0 target 0 lun 0
pass1: <LITE-ON DVD SOHD-167T 9S19> Removable CD-ROM SCSI-0 device 
pass1: 3.300MB/s transfers
bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3
Mounting root from ufs:/dev/ad10s1a
cd0 at ata4 bus 0 target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-S223F SB00> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: cd present [2295104 x 2048 byte records]
(cd1:ata6:0:0:0): error 6
(cd1:ata6:0:0:0): Unretryable Error
cd1 at ata6 bus 0 target 0 lun 0
cd1: <LITE-ON DVD SOHD-167T 9S19> Removable CD-ROM SCSI-0 device 
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
ad10s1: type 0xa5, start 63, end = 586072367, size 586072305 : OK
start_init: trying /sbin/init
ad4s1: type 0xa5, start 63, end = 490234751, size 490234689 : OK
ad4s1: type 0xa5, start 63, end = 490234751, size 490234689 : OK

-- 
C:>WIN                                      |   Directable Mirror Arrays
The computer obeys and wins.                | A better way to focus the sun
You lose and Bill collects.                 |    licences available see
                                            |    http://www.sohara.org/



[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]