DragonFly BSD
DragonFly bugs List (threaded) for 2009-10
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Unable to modify partition table on ThinkPad T61p during install


From: Jens Rehsack <rehsack@xxxxxxxxxxxxxx>
Date: Mon, 05 Oct 2009 20:38:31 +0000

Hi all,

I tried to install a DragonFly BSD for testing purposes on a changeable hard
disk on my Laptop (ThinkPad T61p). I didn't got the partition table of
/dev/ad0 modified - neither after dd (as described in /README) nor after
creating another partition table (I tried creating a file system from using
Windows on primary hard disk of this Laptop and Debian - both worked and
both find it after reboot - DragonFly never find anything on that disk).

I attach a full (verbose) dmesg, ls -l of /dev, pciconf -lv output and
finally (always the same) output from fdisk ad0. Sure I would be glad if I
could get DragonFly installed - but much more I hope this helps you to find
a bug.

Best regards,
Jens

Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v2.4.1-RELEASE #7: Wed Sep 30 18:16:27 PDT 2009
    root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src-misc/sys/AMD64_GENERIC
Calibrating clock(s) ... TSC clock: 2394039420 Hz, i8254 clock: 1193201 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz (2394.02-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 5301600256 (5177344K bytes)
Physical memory chunk(s):
0x00001000 - 0x00098fff, 622592 bytes (152 pages)
0x00f32000 - 0xbfeaffff, 3203915776 bytes (782206 pages)
0x100000000 - 0x13bfeffff, 1006567424 bytes (245744 pages)
avail memory = 3939692544 (3847356K bytes)
Preloaded elf kernel "/boot/kernel" at 0xffffffff80f08000.
Preloaded elf obj module "/boot/modules/acpi.ko" at 0xffffffff80f083e8.
crypto: <crypto core>
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
fildesc_drvinit() building stdin, stdout, stderr: 
md0: Malloc disk
ACPI: RSDP 0xf68c0 00024 (v2 LENOVO)
ACPI: XSDT 0xbfebb62b 00094 (v1 LENOVO TP-7L    00002260  LTP 00000000)
ACPI: FACP 0xbfebb700 000F4 (v3 LENOVO TP-7L    00002260 LNVO 00000001)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-625
ACPI Warning: Optional field Gpe1Block has zero address or length:        0    102C/0 20090521 tbfadt-655
ACPI: DSDT 0xbfebbb1d 10025 (v1 LENOVO TP-7L    00002260 MSFT 03000000)
ACPI: FACS 0xbfee4000 00040
ACPI: SSDT 0xbfebb8b4 00269 (v1 LENOVO TP-7L    00002260 MSFT 03000000)
ACPI: ECDT 0xbfecbb42 00052 (v1 LENOVO TP-7L    00002260 LNVO 00000001)
ACPI: TCPA 0xbfecbb94 00032 (v2 LENOVO TP-7L    00002260 LNVO 00000001)
ACPI: APIC 0xbfecbbc6 00068 (v1 LENOVO TP-7L    00002260 LNVO 00000001)
ACPI: MCFG 0xbfecbc2e 0003C (v1 LENOVO TP-7L    00002260 LNVO 00000001)
ACPI: HPET 0xbfecbc6a 00038 (v1 LENOVO TP-7L    00002260 LNVO 00000001)
ACPI: SLIC 0xbfecbdf0 00176 (v1 LENOVO TP-7L    00002260  LTP 00000000)
ACPI: BOOT 0xbfecbf66 00028 (v1 LENOVO TP-7L    00002260  LTP 00000001)
ACPI: ASF! 0xbfecbf8e 00072 (v16 LENOVO TP-7L    00002260 PTL  00000001)
ACPI: SSDT 0xbfee271b 0025F (v1 LENOVO TP-7L    00002260 INTL 20050513)
ACPI: SSDT 0xbfee297a 000A6 (v1 LENOVO TP-7L    00002260 INTL 20050513)
ACPI: SSDT 0xbfee2a20 004F7 (v1 LENOVO TP-7L    00002260 INTL 20050513)
ACPI: SSDT 0xbfee2f17 001D8 (v1 LENOVO TP-7L    00002260 INTL 20050513)
acpi0.nexus0.root0
acpi0: <LENOVO TP-7L> [tentative] on motherboard
acpi_ec0.acpi0.nexus0.root0
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> [tentative] port 0x66,0x62 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> [attached!] port 0x66,0x62 on acpi0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f880
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=2a008086)
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 29 func 7
AcpiOsDerivePciId: bus 0 dev 26 func 7
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_ec0: info: new max delay is 80 us
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 5, width = 0
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x1008-0x100b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x1008-0x100b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu_cst0.cpu0.acpi0.nexus0.root0
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
ACPI: SSDT 0xbfee1ebd 0085E (v1  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 0xbfee1b32 00306 (v1  PmRef  Cpu0Ist 00000100 INTL 20050513)
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
cpu_pst0.cpu0.acpi0.nexus0.root0
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
cpu_pst0: Unsupported _PSD NumProcessors (2)
device_probe_and_attach: cpu_pst0 attach returned 6
cpu0: <ACPI CPU> [attached!] port 0x1015,0x1014 on acpi0
acpi_tz0.acpi0.nexus0.root0
acpi_tz0: <Thermal Zone> [tentative] on acpi0
acpi_tz0: <Thermal Zone> [attached!] on acpi0
acpi_tz1.acpi0.nexus0.root0
acpi_tz1: <Thermal Zone> [tentative] on acpi0
acpi_tz1: <Thermal Zone> [attached!] on acpi0
acpi_lid0.acpi0.nexus0.root0
acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0
acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Sleep Button> [tentative] on acpi0
acpi_button0: <Sleep Button> [attached!] on acpi0
unknown: not probed (disabled)
acpi_ec0: info: new max delay is 90 us
acpi_ec0: info: new max delay is 120 us
unknown: not probed (disabled)
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
atkbd0.atkbdc0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0047
psm0.atkbdc0.acpi0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: irq maps: 0 0x10 0 0
sio0.acpi0.nexus0.root0
sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
unknown: not probed (disabled)
ppc0: using extended I/O port range
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
battery0.acpi0.nexus0.root0
battery0: <ACPI Control Method Battery> [tentative] on acpi0
battery0: <ACPI Control Method Battery> [attached!] on acpi0
unknown: not probed (disabled)
acpi_acad0.acpi0.nexus0.root0
acpi_acad0: <AC Adapter> [tentative] on acpi0
acpi_acad0: <AC Adapter> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <LENOVO TP-7L> [attached!] at irq 9 on motherboard
pcib0.legacy0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] pcibus 0 on motherboard
pci0.pcib0.legacy0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2a00, revid=0x0c
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2a01, revid=0x0c
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=6
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x000c25c0[HOTPLUG]
found->	vendor=0x8086, dev=0x1049, revid=0x03
	domain=0, bus=0, slot=25, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xfe200000, size 17, enabled
	map[14]: type Memory, range 32, base 0xfe225000, size 12, enabled
	map[18]: type I/O Port, range 32, base 0x1840, size  5, enabled
found->	vendor=0x8086, dev=0x2834, revid=0x03
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	map[20]: type I/O Port, range 32, base 0x1860, size  5, enabled
found->	vendor=0x8086, dev=0x2835, revid=0x03
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=3
	map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
found->	vendor=0x8086, dev=0x283a, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfe226c00, size 10, enabled
found->	vendor=0x8086, dev=0x284b, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0091
	map[10]: type Memory, range 64, base 0xfe220000, size 14, enabled
found->	vendor=0x8086, dev=0x283f, revid=0x03
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG]
found->	vendor=0x8086, dev=0x2841, revid=0x03
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0018a0e0[HOTPLUG]
found->	vendor=0x8086, dev=0x2843, revid=0x03
	domain=0, bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0020a0e0[HOTPLUG]
found->	vendor=0x8086, dev=0x2845, revid=0x03
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0028a0e0[HOTPLUG]
found->	vendor=0x8086, dev=0x2847, revid=0x03
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG]
found->	vendor=0x8086, dev=0x2830, revid=0x03
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=6
	map[20]: type I/O Port, range 32, base 0x18a0, size  5, enabled
found->	vendor=0x8086, dev=0x2831, revid=0x03
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x18c0, size  5, enabled
found->	vendor=0x8086, dev=0x2832, revid=0x03
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	map[20]: type I/O Port, range 32, base 0x18e0, size  5, enabled
found->	vendor=0x8086, dev=0x2836, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfe227000, size 10, enabled
found->	vendor=0x8086, dev=0x2448, revid=0xf3
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2811, revid=0x03
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2850, revid=0x03
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=255
	map[20]: type I/O Port, range 32, base 0x1830, size  4, enabled
found->	vendor=0x8086, dev=0x2829, revid=0x03
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=6
	powerspec 3  supports D0 D3  current D0
	MSI supports 4 messages
	map[10]: type I/O Port, range 32, base 0x1c48, size  3, enabled
	map[14]: type I/O Port, range 32, base 0x1c1c, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x1c40, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x1c18, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x1c20, size  5, enabled
	map[24]: type Memory, range 32, base 0xfe226000, size 11, enabled
found->	vendor=0x8086, dev=0x283e, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[10]: type Memory, range 32, base 0xfe227400, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x1c60, size  5, enabled
pcib1.pci0.pcib0.legacy0.nexus0.root0
pcib1: <PCI-PCI bridge> [tentative] irq 6 at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xd0000000-0xd2ffffff
pcib1:   prefetched decode 0xe0000000-0xefffffff
pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x10de, dev=0x040c, revid=0xa1
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=6
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0001[DEVICE]
	map[10]: type Memory, range 32, base 0xd2000000, size 24, enabled
pcib1: requested memory range 0xd2000000-0xd2ffffff: good
	map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
pcib1: requested memory range 0xe0000000-0xefffffff: good
	map[1c]: type Memory, range 64, base 0xd0000000, size 25, enabled
pcib1: requested memory range 0xd0000000-0xd1ffffff: good
	map[24]: type I/O Port, range 32, base 0x2000, size  7, enabled
pcib1: requested I/O range 0x2000-0x207f: in range
vgapci0.pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
vgapci0: <VGA-compatible display> [tentative] port 0x2000-0x207f mem 0xd0000000-0xd1ffffff,0xe0000000-0xefffffff,0xd2000000-0xd2ffffff irq 6 at device 0.0 on pci1
vgapci0: <VGA-compatible display> [attached!] port 0x2000-0x207f mem 0xd0000000-0xd1ffffff,0xe0000000-0xefffffff,0xd2000000-0xd2ffffff irq 6 at device 0.0 on pci1
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI-PCI bridge> [attached!] irq 6 at device 1.0 on pci0
em0.pci0.pcib0.legacy0.nexus0.root0
em0: <Intel(R) PRO/1000 Network Connection ICH8_IGP_M_AMT 6.9.6> [tentative] port 0x1840-0x185f mem 0xfe225000-0xfe225fff,0xfe200000-0xfe21ffff irq 5 at device 25.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe200000
em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfe225000
battery0: battery initialization start
acpi_ec0: info: new max delay is 270 us
battery0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
em0: bpf attached
em0: MAC address: 00:1c:25:1e:00:6d
em0: <Intel(R) PRO/1000 Network Connection ICH8_IGP_M_AMT 6.9.6> [attached!] port 0x1840-0x185f mem 0xfe225000-0xfe225fff,0xfe200000-0xfe21ffff irq 5 at device 25.0 on pci0
uhci0.pci0.pcib0.legacy0.nexus0.root0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> [tentative] port 0x1860-0x187f irq 5 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
usb0: <Intel 82801H (ICH8) USB controller USB-D> [tentative] on uhci0
usb0: USB revision 1.0
uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <Intel 82801H (ICH8) USB controller USB-D> [attached!] on uhci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> [attached!] port 0x1860-0x187f irq 5 at device 26.0 on pci0
uhci1.pci0.pcib0.legacy0.nexus0.root0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> [tentative] port 0x1880-0x189f irq 3 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
usb1: <Intel 82801H (ICH8) USB controller USB-E> [tentative] on uhci1
usb1: USB revision 1.0
uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <Intel 82801H (ICH8) USB controller USB-E> [attached!] on uhci1
uhci1: <Intel 82801H (ICH8) USB controller USB-E> [attached!] port 0x1880-0x189f irq 3 at device 26.1 on pci0
pci0: <serial bus, USB> (vendor 0x8086, dev 0x283a) at device 26.7 irq 11
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x284b) at device 27.0 irq 11
pcib2.pci0.pcib0.legacy0.nexus0.root0
pcib2: <PCI-PCI bridge> [tentative] irq 5 at device 28.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x3000-0x3fff
pcib2:   memory decode     0xdc100000-0xdf2fffff
pcib2:   prefetched decode 0xdfd00000-0xdfdfffff
pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x444e, revid=0x01
	domain=0, bus=2, slot=0, func=0
	class=05-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0211[LEGDEV]
	map[10]: type Memory, range 32, base 0xdf2ffc00, size 10, enabled
pcib2: requested memory range 0xdf2ffc00-0xdf2fffff: good
	map[18]: type I/O Port, range 32, base 0x3000, size  7, enabled
pcib2: requested I/O range 0x3000-0x307f: in range
pci2: <memory> (vendor 0x8086, dev 0x444e) at device 0.0 irq 5
pci2: <PCI bus> [attached!] on pcib2
pcib2: <PCI-PCI bridge> [attached!] irq 5 at device 28.0 on pci0
pcib3.pci0.pcib0.legacy0.nexus0.root0
pcib3: <PCI-PCI bridge> [tentative] irq 3 at device 28.1 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x4000-0x4fff
pcib3:   memory decode     0xd4000000-0xd7dfffff
pcib3:   prefetched decode 0xdfa00000-0xdfafffff
pci3.pcib3.pci0.pcib0.legacy0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x8086, dev=0x4230, revid=0x61
	domain=0, bus=3, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0001[DEVICE]
	map[10]: type Memory, range 64, base 0xd7dfe000, size 13, enabled
pcib3: requested memory range 0xd7dfe000-0xd7dfffff: good
pci3: <network> (vendor 0x8086, dev 0x4230) at device 0.0 irq 3
pci3: <PCI bus> [attached!] on pcib3
pcib3: <PCI-PCI bridge> [attached!] irq 3 at device 28.1 on pci0
pcib4.pci0.pcib0.legacy0.nexus0.root0
pcib4: <PCI-PCI bridge> [tentative] irq 11 at device 28.2 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x5000-0x5fff
pcib4:   memory decode     0xfc000000-0xfdffffff
pcib4:   prefetched decode 0xf8000000-0xf80fffff
pci4.pcib4.pci0.pcib0.legacy0.nexus0.root0
pci4: <PCI bus> [tentative] on pcib4
pci4: domain=0, physical bus=4
pci4: <PCI bus> [attached!] on pcib4
pcib4: <PCI-PCI bridge> [attached!] irq 11 at device 28.2 on pci0
pcib5.pci0.pcib0.legacy0.nexus0.root0
pcib5: <PCI-PCI bridge> [tentative] irq 10 at device 28.3 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   12
pcib5:   I/O decode        0x6000-0x6fff
pcib5:   memory decode     0xd8000000-0xd9ffffff
pcib5:   prefetched decode 0xdf700000-0xdf7fffff
pcib5: Disable PCI Express hot-plug interrupts(0x0028)
pci5.pcib5.pci0.pcib0.legacy0.nexus0.root0
pci5: <PCI bus> [tentative] on pcib5
pci5: domain=0, physical bus=5
pci5: <PCI bus> [attached!] on pcib5
pcib5: <PCI-PCI bridge> [attached!] irq 10 at device 28.3 on pci0
pcib6.pci0.pcib0.legacy0.nexus0.root0
pcib6: <PCI-PCI bridge> [tentative] irq 5 at device 28.4 on pci0
pcib6:   domain            0
pcib6:   secondary bus     13
pcib6:   subordinate bus   20
pcib6:   I/O decode        0x7000-0x7fff
pcib6:   memory decode     0xcc000000-0xcdffffff
pcib6:   prefetched decode 0xdf400000-0xdf4fffff
pci13.pcib6.pci0.pcib0.legacy0.nexus0.root0
pci13: <PCI bus> [tentative] on pcib6
pci13: domain=0, physical bus=13
pci13: <PCI bus> [attached!] on pcib6
pcib6: <PCI-PCI bridge> [attached!] irq 5 at device 28.4 on pci0
uhci2.pci0.pcib0.legacy0.nexus0.root0
uhci2: <Intel 82801H (ICH8) USB controller USB-A> [tentative] port 0x18a0-0x18bf irq 6 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
usb2: <Intel 82801H (ICH8) USB controller USB-A> [tentative] on uhci2
usb2: USB revision 1.0
uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <Intel 82801H (ICH8) USB controller USB-A> [attached!] on uhci2
uhci2: <Intel 82801H (ICH8) USB controller USB-A> [attached!] port 0x18a0-0x18bf irq 6 at device 29.0 on pci0
uhci3.pci0.pcib0.legacy0.nexus0.root0
uhci3: <Intel 82801H (ICH8) USB controller USB-B> [tentative] port 0x18c0-0x18df irq 11 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18c0
usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
usb3: <Intel 82801H (ICH8) USB controller USB-B> [tentative] on uhci3
usb3: USB revision 1.0
uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <Intel 82801H (ICH8) USB controller USB-B> [attached!] on uhci3
uhci3: <Intel 82801H (ICH8) USB controller USB-B> [attached!] port 0x18c0-0x18df irq 11 at device 29.1 on pci0
uhci4.pci0.pcib0.legacy0.nexus0.root0
uhci4: <Intel 82801H (ICH8) USB controller USB-C> [tentative] port 0x18e0-0x18ff irq 7 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18e0
usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
usb4: <Intel 82801H (ICH8) USB controller USB-C> [tentative] on uhci4
usb4: USB revision 1.0
uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb4
uhub4: 2 ports with 2 removable, self powered
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb4
usb4: <Intel 82801H (ICH8) USB controller USB-C> [attached!] on uhci4
uhci4: <Intel 82801H (ICH8) USB controller USB-C> [attached!] port 0x18e0-0x18ff irq 7 at device 29.2 on pci0
pci0: <serial bus, USB> (vendor 0x8086, dev 0x2836) at device 29.7 irq 11
pcib7.pci0.pcib0.legacy0.nexus0.root0
pcib7: <PCI-PCI bridge> [tentative] at device 30.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     21
pcib7:   subordinate bus   24
pcib7:   I/O decode        0x8000-0xbfff
pcib7:   no prefetched decode
pcib7:   Subtractively decoded bridge.
pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
pci21: <PCI bus> [tentative] on pcib7
pci21: domain=0, physical bus=21
found->	vendor=0x1180, dev=0x0476, revid=0xba
	domain=0, bus=21, slot=0, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
	intpin=a, irq=6
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf8100000, size 12, enabled
pcib7: requested memory range 0xf8100000-0xf8100fff: good
found->	vendor=0x1180, dev=0x0832, revid=0x04
	domain=0, bus=21, slot=0, func=1
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf8101000, size 11, enabled
pcib7: requested memory range 0xf8101000-0xf81017ff: good
found->	vendor=0x1180, dev=0x0822, revid=0x21
	domain=0, bus=21, slot=0, func=2
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf8101800, size  8, enabled
pcib7: requested memory range 0xf8101800-0xf81018ff: good
found->	vendor=0x1180, dev=0x0843, revid=0x11
	domain=0, bus=21, slot=0, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf8101c00, size  8, enabled
pcib7: requested memory range 0xf8101c00-0xf8101cff: good
found->	vendor=0x1180, dev=0x0592, revid=0x11
	domain=0, bus=21, slot=0, func=4
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf8102000, size  8, enabled
pcib7: requested memory range 0xf8102000-0xf81020ff: good
found->	vendor=0x1180, dev=0x0852, revid=0x11
	domain=0, bus=21, slot=0, func=5
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf8102400, size  8, enabled
pcib7: requested memory range 0xf8102400-0xf81024ff: good
cbb0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
cbb0: <RF5C476 PCI-CardBus Bridge> [tentative] mem 0xf8100000-0xf8100fff irq 6 at device 0.0 on pci21
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8100000
cardbus0.cbb0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
cardbus0: <CardBus bus> [tentative] on cbb0
cardbus0: <CardBus bus> [attached!] on cbb0
pccard0.cbb0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
pccard0: <16-bit PCCard bus> [tentative] on cbb0
pccard0: <16-bit PCCard bus> [attached!] on cbb0
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x060700ba 0x00822008 
  0x10: 0xf8100000 0x020000dc 0xb0181615 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07000106 
  0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x04a00001 0x00000000 0x04630463 0x00000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x09000000 0x00f00000 0x00000003 
  0xb0: 0x00000000 0x60000000 0x00003000 0x00000000 
  0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb0: <RF5C476 PCI-CardBus Bridge> [attached!] mem 0xf8100000-0xf8100fff irq 6 at device 0.0 on pci21
fwohci0: vendor=1180, dev=832
fwohci0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
fwohci0: <1394 Open Host Controller Interface> [tentative] mem 0xf8101000-0xf81017ff irq 11 at device 0.1 on pci21
fwohci0: latency timer 32 -> 32.
fwohci0: cache size 0 -> 8.
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf8101000
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:01:6c:20:00:37:0b:88
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=22, retry=0
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xf864a242 -> 0xf864a242
fwohci0: fwohci_set_intr: 1
firewire0.fwohci0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
fwe0.firewire0.fwohci0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
fwe0: <Ethernet over FireWire> [tentative] on firewire0
fwe0: bpf attached
fwe0: MAC address: 02:01:6c:37:0b:88
fwe0: <Ethernet over FireWire> [attached!] on firewire0
sbp0.firewire0.fwohci0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
sbp_attach (cold=1)
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
0117c000 OUTL ST2 ALL ALL    12 00000000 0117c080 8411:000a RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
fwohci0: <1394 Open Host Controller Interface> [attached!] mem 0xf8101000-0xf81017ff irq 11 at device 0.1 on pci21
pci21: <base peripheral, SD host controller> (vendor 0x1180, dev 0x0822) at device 0.2 irq 7
pci21: <base peripheral> (vendor 0x1180, dev 0x0843) at device 0.3 irq 7
pci21: <base peripheral> (vendor 0x1180, dev 0x0592) at device 0.4 irq 7
pci21: <base peripheral> (vendor 0x1180, dev 0x0852) at device 0.5 irq 7
pci21: <PCI bus> [attached!] on pcib7
pcib7: <PCI-PCI bridge> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacy0.nexus0.root0
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacy0.nexus0.root0
atapci0: <Intel ATA controller> [tentative] port 0x1830-0x183f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1830
ata0.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
uhub5: <vendor 0x04b3 product 0x4486, class 9/0, rev 2.00/0.01, addr 2> [tentative] on uhub1
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
uhub5: 7 ports with 7 removable, self powered
uhub5: <vendor 0x04b3 product 0x4486, class 9/0, rev 2.00/0.01, addr 2> [attached!] on uhub1
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ugen0.uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [tentative] on uhub0
ad0: FreeBSD check1 failed
ad0: 238475MB <SAMSUNG HM251JJ 2AA00 00> at ata0-master UDMA33
ad0: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel ATA controller> [attached!] port 0x1830-0x183f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ahci0.pci0.pcib0.legacy0.nexus0.root0
ahci0: <AHCI-PCI-SATA> [tentative] port 0x1c20-0x1c3f,0x1c18-0x1c1b,0x1c40-0x1c47,0x1c1c-0x1c1f,0x1c48-0x1c4f mem 0xfe226000-0xfe2267ff irq 6 at device 31.2 on pci0
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfe226000
ad0: invalid primary partition table: no magic
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [attached!] on uhub0
bus_explore done
sbp_post_explore
umass0.uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
umass0: <IBM CY4611B V2.50RC16, class 0/0, rev 2.00/0.07, addr 3> [tentative] on uhub5
umass0:3:0:-1: Attached to scbus3
umass0: <IBM CY4611B V2.50RC16, class 0/0, rev 2.00/0.07, addr 3> [attached!] on uhub5
uhub6.uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> [tentative] on uhub5
uhub6: 4 ports with 4 removable, self powered
uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> [attached!] on uhub5
ukbd0.uhub6.uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [tentative] on uhub6
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x350000
ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [attached!] on uhub6
ums0.uhub6.uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [tentative] on uhub6
ums0: 5 buttons and Z dir.
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [attached!] on uhub6
ahci0: Intel hocus pocus
ahci0: AHCI 1.1 capabilities 0xe710ff82<S64A,NCQ,SSNTF,SALP,SAL,SCLO,PMD,SSC,PSC,CCCS>, 3 ports, 32 tags/port, gen 1 (1.5Gbps)
ahci0.0: START HARDRESET
ahci0.0: END HARDRESET 0
ahci0.0: START SOFTRESET c017<CR,FR,FRE,POD,SUD,ST>
ahci0.0: sig 00000101
ahci0.0: END SOFTRESET
ahci0.2: START HARDRESET
ahci0.0: Found DISK "HITACHI HTS722016K9SA00 DCDZC75A" serial="071103DP1D10DGG5YHJP"
ahci0.0: tags=32/32 satacap=1702 satafea=005e NCQ=YES capacity=152627.83MB
ahci0.0: f85=7469 f86=bc09 f87=6163 WC=enabled RA=enabled SEC=frozen
(probe0:ahci0:0:1:0): error 22
(probe0:ahci0:0:1:0): Unretryable Error
(probe0:ahci0:0:2:0): error 22
(probe0:ahci0:0:2:0): Unretryable Error
(probe0:ahci0:0:3:0): error 22
(probe0:ahci0:0:3:0): Unretryable Error
(probe0:ahci0:0:4:0): error 22
(probe0:ahci0:0:4:0): Unretryable Error
(probe0:ahci0:0:5:0): error 22
(probe0:ahci0:0:5:0): Unretryable Error
(probe0:ahci0:0:6:0): error 22
(probe0:ahci0:0:6:0): Unretryable Error
(probe0:ahci0:0:7:0): error 22
(probe0:ahci0:0:7:0): Unretryable Error
(probe0:ahci0:0:8:0): error 22
(probe0:ahci0:0:8:0): Unretryable Error
(probe0:ahci0:0:9:0): error 22
(probe0:ahci0:0:9:0): Unretryable Error
(probe0:ahci0:0:10:0): error 22
(probe0:ahci0:0:10:0): Unretryable Error
(probe0:ahci0:0:11:0): error 22
(probe0:ahci0:0:11:0): Unretryable Error
(probe0:ahci0:0:12:0): error 22
(probe0:ahci0:0:12:0): Unretryable Error
(probe0:ahci0:0:13:0): error 22
(probe0:ahci0:0:13:0): Unretryable Error
(probe0:ahci0:0:14:0): error 22
(probe0:ahci0:0:14:0): Unretryable Error
ahci0.2: Port appears to be unplugged
ahci0.2: No device detected
ahci0.2: END HARDRESET 19
(probe0:ahci0:2:0:0): error 22
(probe0:ahci0:2:0:0): Unretryable Error
(probe0:ahci0:2:1:0): error 22
(probe0:ahci0:2:1:0): Unretryable Error
(probe0:ahci0:2:2:0): error 22
(probe0:ahci0:2:2:0): Unretryable Error
(probe0:ahci0:2:3:0): error 22
(probe0:ahci0:2:3:0): Unretryable Error
(probe0:ahci0:2:4:0): error 22
(probe0:ahci0:2:4:0): Unretryable Error
(probe0:ahci0:2:5:0): error 22
(probe0:ahci0:2:5:0): Unretryable Error
(probe0:ahci0:2:6:0): error 22
(probe0:ahci0:2:6:0): Unretryable Error
(probe0:ahci0:2:7:0): error 22
(probe0:ahci0:2:7:0): Unretryable Error
(probe0:ahci0:2:8:0): error 22
(probe0:ahci0:2:8:0): Unretryable Error
(probe0:ahci0:2:9:0): error 22
(probe0:ahci0:2:9:0): Unretryable Error
(probe0:ahci0:2:10:0): error 22
(probe0:ahci0:2:10:0): Unretryable Error
(probe0:ahci0:2:11:0): error 22
(probe0:ahci0:2:11:0): Unretryable Error
(probe0:ahci0:2:12:0): error 22
(probe0:ahci0:2:12:0): Unretryable Error
(probe0:ahci0:2:13:0): error 22
(probe0:ahci0:2:13:0): Unretryable Error
(probe0:ahci0:2:14:0): error 22
(probe0:ahci0:2:14:0): Unretryable Error
ahci0: <AHCI-PCI-SATA> [attached!] port 0x1c20-0x1c3f,0x1c18-0x1c1b,0x1c40-0x1c47,0x1c1c-0x1c1f,0x1c48-0x1c4f mem 0xfe226000-0xfe2267ff irq 6 at device 31.2 on pci0
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x283e) at device 31.3 irq 10
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] pcibus 0 on motherboard
ex_isa_identify()
ahc_isa_probe 1: ioport 0x1c00 alloc failed
atkbdc-: atkbdc0 exists, using next available unit number
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio2: can't drain, serial port might not exist, disabling
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio3: not probed (disabled)
sio4: not probed (disabled)
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
intr 3 at 40001/40000 hz, livelocked limit engaged!
sl0: bpf attached
faith0: bpf attached
lo0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
ppp0: bpf attached
ip: MPSAFE
arp: MPSAFE
CAM: Configuring bus: sbp0
CAM: Configuring bus: ata0
CAM: Configuring bus: ata1
CAM: Configuring bus: umass-sim0
CAM: Configuring bus: ahci0
CAM: Configuring 6 busses
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe0:sbp0:0:1:0): error 22
(probe0:sbp0:0:1:0): Unretryable Error
(probe0:sbp0:0:2:0): error 22
(probe0:sbp0:0:2:0): Unretryable Error
(probe0:sbp0:0:3:0): error 22
(probe0:sbp0:0:3:0): Unretryable Error
(probe0:sbp0:0:4:0): error 22
(probe0:sbp0:0:4:0): Unretryable Error
(probe0:sbp0:0:5:0): error 22
(probe0:sbp0:0:5:0): Unretryable Error
(probe0:sbp0:0:6:0): error 22
(probe0:sbp0:0:6:0): Unretryable Error
CAM: Finished configuring bus: sbp0
CAM: Finished configuring bus: ata0
CAM: Finished configuring bus: ata1
(probe0:ahci0:0:1:0): error 22
(probe0:ahci0:0:1:0): Unretryable Error
(probe0:ahci0:0:2:0): error 22
(probe0:ahci0:0:2:0): Unretryable Error
(probe0:ahci0:0:3:0): error 22
(probe0:ahci0:0:3:0): Unretryable Error
(probe0:ahci0:0:4:0): error 22
(probe0:ahci0:0:4:0): Unretryable Error
(probe0:ahci0:0:5:0): error 22
(probe0:ahci0:0:5:0): Unretryable Error
(probe0:ahci0:0:6:0): error 22
(probe0:ahci0:0:6:0): Unretryable Error
(probe0:ahci0:0:7:0): error 22
(probe0:ahci0:0:7:0): Unretryable Error
(probe0:ahci0:0:8:0): error 22
(probe0:ahci0:0:8:0): Unretryable Error
(probe0:ahci0:0:9:0): error 22
(probe0:ahci0:0:9:0): Unretryable Error
(probe0:ahci0:0:10:0): error 22
(probe0:ahci0:0:10:0): Unretryable Error
(probe0:ahci0:0:11:0): error 22
(probe0:ahci0:0:11:0): Unretryable Error
(probe0:ahci0:0:12:0): error 22
(probe0:ahci0:0:12:0): Unretryable Error
(probe0:ahci0:0:13:0): error 22
(probe0:ahci0:0:13:0): Unretryable Error
(probe0:ahci0:0:14:0): error 22
(probe0:ahci0:0:14:0): Unretryable Error
CAM: Finished configuring bus: ahci0
(probe0:ahci0:2:0:0): error 22
(probe0:ahci0:2:0:0): Unretryable Error
(probe0:ahci0:2:1:0): error 22
(probe0:ahci0:2:1:0): Unretryable Error
(probe0:ahci0:2:2:0): error 22
(probe0:ahci0:2:2:0): Unretryable Error
(probe0:ahci0:2:3:0): error 22
(probe0:ahci0:2:3:0): Unretryable Error
(probe0:ahci0:2:4:0): error 22
(probe0:ahci0:2:4:0): Unretryable Error
(probe0:ahci0:2:5:0): error 22
(probe0:ahci0:2:5:0): Unretryable Error
(probe0:ahci0:2:6:0): error 22
(probe0:ahci0:2:6:0): Unretryable Error
(probe0:ahci0:2:7:0): error 22
(probe0:ahci0:2:7:0): Unretryable Error
(probe0:ahci0:2:8:0): error 22
(probe0:ahci0:2:8:0): Unretryable Error
(probe0:ahci0:2:9:0): error 22
(probe0:ahci0:2:9:0): Unretryable Error
(probe0:ahci0:2:10:0): error 22
(probe0:ahci0:2:10:0): Unretryable Error
(probe0:ahci0:2:11:0): error 22
(probe0:ahci0:2:11:0): Unretryable Error
(probe0:ahci0:2:12:0): error 22
(probe0:ahci0:2:12:0): Unretryable Error
(probe0:ahci0:2:13:0): error 22
(probe0:ahci0:2:13:0): Unretryable Error
(probe0:ahci0:2:14:0): error 22
(probe0:ahci0:2:14:0): Unretryable Error
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: umass-sim0
CAM: finished configuring all busses (0 left)
pass8 at umass-sim0 bus 0 target 0 lun 0
pass8: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device 
pass8: 1.000MB/s transfers
pass0 at ahci0 bus 0 target 0 lun 0
pass0: <SATA HITACHI HTS72201 DCDZ> Fixed Direct Access SCSI-4 device 
pass0: Serial Number 071103DP1D10DGG5YHJP
pass0: 150.000MB/s transfers
sg8 at umass-sim0 bus 0 target 0 lun 0
sg8: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device 
sg8: 1.000MB/s transfers
sg0 at ahci0 bus 0 target 0 lun 0
sg0: <SATA HITACHI HTS72201 DCDZ> Fixed Direct Access SCSI-4 device 
sg0: Serial Number 071103DP1D10DGG5YHJP
sg0: 150.000MB/s transfers
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA HITACHI HTS72201 DCDZ> Fixed Direct Access SCSI-4 device 
da0: Serial Number 071103DP1D10DGG5YHJP
da0: 150.000MB/s transfers
da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C)
no B_DEVMAGIC (bootdev=0)
ATA PseudoRAID loaded
cd8 at umass-sim0 bus 0 target 0 lun 0
cd8: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device 
cd8: 1.000MB/s transfers
cd8: cd present [284219 x 2048 byte records]
da0: type 0x27, start 2048, end = 13860863, size 13858816 : OK
da0: type 0x7, start 13865040, end = 312575759, size 298710720 : OK
intr 3 at 0/20000 hz, livelock removed
cd8: invalid primary partition table: no magic
cd8: invalid primary partition table: no magic
cd8: invalid primary partition table: no magic
Mounting root from cd9660:cd0
tryroot cd0
no disk named 'cd0'
setrootbyname failed
iso_mountroot: can't find rootvp
Root mount failed: 6
Mounting root from cd9660:acd0
tryroot acd0
no disk named 'acd0'
setrootbyname failed
iso_mountroot: can't find rootvp
Root mount failed: 6
Mounting root from cd9660:cd1
tryroot cd1
no disk named 'cd1'
setrootbyname failed
iso_mountroot: can't find rootvp
Root mount failed: 6
Mounting root from cd9660:acd1
tryroot acd1
no disk named 'acd1'
setrootbyname failed
iso_mountroot: can't find rootvp
Root mount failed: 6
Mounting root from cd9660:cd8
tryroot cd8
cd8: invalid primary partition table: no magic
cd8: invalid primary partition table: no magic
iso_mountroot(): using session at block 0
cd8: invalid primary partition table: no magic
cd8: invalid primary partition table: no magic
Mounting devfs
start_init: trying /sbin/init
cd8: invalid primary partition table: no magic
cd8: invalid primary partition table: no magic
cd8: invalid primary partition table: no magic
cd8: invalid primary partition table: no magic
mountmsdosfs(): bad FAT32 filesystem
umass1.uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
umass1: <3System USB FlashDisk, class 0/0, rev 2.00/1.00, addr 2> [tentative] on uhub2
umass1:6:1:-1: Attached to scbus6
umass1: <3System USB FlashDisk, class 0/0, rev 2.00/1.00, addr 2> [attached!] on uhub2
sg9 at umass-sim1 bus 1 target 0 lun 0
sg9: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device 
sg9: 1.000MB/s transfers
pass9 at umass-sim1 bus 1 target 0 lun 0
pass9: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device 
pass9: 1.000MB/s transfers
da8 at umass-sim1 bus 1 target 0 lun 0
da8: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device 
da8: 1.000MB/s transfers
da8: 15360MB (31457280 512 byte sectors: 255H 63S/T 1958C)
da8: type 0xc, start 63, end = 31455647, size 31455585 : OK
pci0: driver added
found->	vendor=0x8086, dev=0x283a, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	powerspec 2  supports D0 D3  current D0
pci0:0:26:7: reprobing on driver added
ehci0.pci0.pcib0.legacy0.nexus0.root0
ehci0: <EHCI (generic) USB 2.0 controller> [tentative] mem 0xfe226c00-0xfe226fff irq 11 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe226c00
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1
usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
usb5: <EHCI (generic) USB 2.0 controller> [tentative] on ehci0
usb5: USB revision 2.0
ugen0: at uhub0 port 2 (addr 2) disconnected
devfs: Please check that only the right ugen devices were removed !!!
ugen0: detached
uhub5: at uhub1 port 2 (addr 2) disconnected
(cd8:umass-sim0:0:0:0): lost device
(cd8:umass-sim0:0:0:0): removing device entry
(sg8:umass-sim0:0:0:0): lost device
(sg8:umass-sim0:0:0:0): removing device entry
(pass8:umass-sim0:0:0:0): lost device
(pass8:umass-sim0:0:0:0): removing device entry
uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb5
uhub7: 4 ports with 4 removable, self powered
umass0: detached
ukbd0: detached
ums0: detached
uhub6: detached
uhub5: detached
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb5
usb5: <EHCI (generic) USB 2.0 controller> [attached!] on ehci0
ehci0: <EHCI (generic) USB 2.0 controller> [attached!] mem 0xfe226c00-0xfe226fff irq 11 at device 26.7 on pci0
found->	vendor=0x8086, dev=0x284b, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0091
pci0:0:27:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2836, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
pci0:0:29:7: reprobing on driver added
ehci1.pci0.pcib0.legacy0.nexus0.root0
ehci1: <EHCI (generic) USB 2.0 controller> [tentative] mem 0xfe227000-0xfe2273ff irq 11 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe227000
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb2 usb3 usb4
usb6.ehci1.pci0.pcib0.legacy0.nexus0.root0
usb6: <EHCI (generic) USB 2.0 controller> [tentative] on ehci1
usb6: USB revision 2.0
umass1: at uhub2 port 1 (addr 2) disconnected
(pass9:umass-sim1:1:0:0): lost device
(pass9:umass-sim1:1:0:0): removing device entry
(sg9:umass-sim1:1:0:0): lost device
(sg9:umass-sim1:1:0:0): removing device entry
(da8:umass-sim1:1:0:0): lost device
(da8:umass-sim1:1:0:0): removing device entry
uhub5.usb6.ehci1.pci0.pcib0.legacy0.nexus0.root0
uhub5: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb6
uhub5: 6 ports with 6 removable, self powered
umass1: detached
uhub5: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb6
usb6: <EHCI (generic) USB 2.0 controller> [attached!] on ehci1
ehci1: <EHCI (generic) USB 2.0 controller> [attached!] mem 0xfe227000-0xfe2273ff irq 11 at device 29.7 on pci0
found->	vendor=0x8086, dev=0x283e, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
pci0:0:31:3: reprobing on driver added
pci1: driver added
pci2: driver added
found->	vendor=0x8086, dev=0x444e, revid=0x01
	domain=0, bus=2, slot=0, func=0
	class=05-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0211[LEGDEV]
pci0:2:0:0: reprobing on driver added
pci3: driver added
found->	vendor=0x8086, dev=0x4230, revid=0x61
	domain=0, bus=3, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0001[DEVICE]
pci0:3:0:0: reprobing on driver added
pci4: driver added
pci5: driver added
pci13: driver added
pci21: driver added
found->	vendor=0x1180, dev=0x0822, revid=0x21
	domain=0, bus=21, slot=0, func=2
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:21:0:2: reprobing on driver added
found->	vendor=0x1180, dev=0x0843, revid=0x11
	domain=0, bus=21, slot=0, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:21:0:3: reprobing on driver added
found->	vendor=0x1180, dev=0x0592, revid=0x11
	domain=0, bus=21, slot=0, func=4
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:21:0:4: reprobing on driver added
found->	vendor=0x1180, dev=0x0852, revid=0x11
	domain=0, bus=21, slot=0, func=5
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:21:0:5: reprobing on driver added
umass0.uhub5.usb6.ehci1.pci0.pcib0.legacy0.nexus0.root0
umass0: <3System USB FlashDisk, class 0/0, rev 2.00/1.00, addr 2> [tentative] on uhub5
umass0:7:0:-1: Attached to scbus7
umass0: <3System USB FlashDisk, class 0/0, rev 2.00/1.00, addr 2> [attached!] on uhub5
uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
uhub6: <vendor 0x04b3 product 0x4486, class 9/0, rev 2.00/0.01, addr 2> [tentative] on uhub7
uhub6: multiple transaction translators
uhub6: 7 ports with 7 removable, self powered
ugen0.uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [tentative] on uhub0
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [attached!] on uhub0
uhub6: <vendor 0x04b3 product 0x4486, class 9/0, rev 2.00/0.01, addr 2> [attached!] on uhub7
sg8 at umass-sim0 bus 0 target 0 lun 0
sg8: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device 
sg8: 40.000MB/s transfers
pass8 at umass-sim0 bus 0 target 0 lun 0
pass8: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device 
pass8: 40.000MB/s transfers
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device 
da8: 40.000MB/s transfers
da8: 15360MB (31457280 512 byte sectors: 255H 63S/T 1958C)
da8: type 0xc, start 63, end = 31455647, size 31455585 : OK
umass1.uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
umass1: <IBM CY4611B V2.50RC16, class 0/0, rev 2.00/0.07, addr 3> [tentative] on uhub6
umass1:8:1:-1: Attached to scbus8
umass1: <IBM CY4611B V2.50RC16, class 0/0, rev 2.00/0.07, addr 3> [attached!] on uhub6
sg9 at umass-sim1 bus 1 target 0 lun 0
sg9: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device 
sg9: 40.000MB/s transfers
pass9 at umass-sim1 bus 1 target 0 lun 0
pass9: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device 
pass9: 40.000MB/s transfers
cd8 at umass-sim1 bus 1 target 0 lun 0
cd8: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device 
cd8: 40.000MB/s transfers
cd8: cd present [284219 x 2048 byte records]
uhub8.uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> [tentative] on uhub6
uhub8: single transaction translator
uhub8: 4 ports with 4 removable, self powered
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> [attached!] on uhub6
ukbd0.uhub8.uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [tentative] on uhub8
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x350000
ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [attached!] on uhub8
ums0.uhub8.uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [tentative] on uhub8
ums0: 5 buttons and Z dir.
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [attached!] on uhub8
cd8: invalid primary partition table: no magic
cd8: invalid primary partition table: no magic
cd8: invalid primary partition table: no magic

fdisk: invalid fdisk partition table found
******* Working on device /dev/ad0 *******
parameters extracted from device are:
cylinders=484521 heads=16 sectors/track=63 (1008 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=484521 heads=16 sectors/track=63 (1008 blks/cyl)

Warning: ending cylinder wraps, using all 1's
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
<UNUSED>
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD)
    start 63, size 488397105 (238475 Meg), flag 80 (active)
	beg: cyl 0/ head 1/ sector 1;
	end: cyl 1023/ head 255/ sector 63

total 0
crw-r--r--  1 root  wheel      15, 0x00000000 Oct  5 21:48 acpi
crw-r-----  1 root  operator   20, 0x1e110007 Oct  5 21:48 ad0
crw-r-----  1 root  operator   20, 0x1e100007 Oct  5 21:48 ad0s0
crw-rw-r--  1 root  operator   16, 0x00000000 Oct  5 21:48 apm
crw-------  1 root  operator   14, 0x00000000 Oct  5 21:48 ata
crw-------  1 root  wheel      12, 0xffff00ff Oct  5 21:48 bpf
crw-------  1 root  wheel      12, 0x00000000 Oct  5 21:48 bpf0
crw-------  1 root  wheel      12, 0x00000001 Oct  5 21:48 bpf1
crw-------  1 root  wheel      12, 0x00000002 Oct  5 21:48 bpf2
crw-------  1 root  wheel      12, 0x00000003 Oct  5 21:48 bpf3
crw-rw-rw-  1 root  wheel      17, 0x00000000 Oct  5 21:48 bpsm0
crw-r-----  1 root  operator   29, 0x1e110047 Oct  5 21:52 cd8
crw-r-----  1 root  operator   29, 0x1e100047 Oct  5 21:52 cd8s0
crw-------  1 root  wheel       4, 0x00000000 Oct  5 21:49 console
crw-------  1 root  wheel      23, 0x000000ff Oct  5 21:48 consolectl
crw-rw----  1 uucp  dialer     18, 0x00000080 Oct  5 21:48 cuaa0
crw-rw----  1 uucp  dialer     18, 0x000000a0 Oct  5 21:48 cuaia0
crw-rw----  1 uucp  dialer     18, 0x000000c0 Oct  5 21:48 cuala0
crw-r-----  1 root  operator   28, 0x1e110007 Oct  5 21:48 da0
crw-r-----  1 root  operator   28, 0x1e120007 Oct  5 21:48 da0s1
crw-r-----  1 root  operator   28, 0x1e130007 Oct  5 21:48 da0s2
crw-r-----  1 root  operator   28, 0x1e110047 Oct  5 21:52 da8
crw-r-----  1 root  operator   28, 0x1e120047 Oct  5 21:52 da8s1
crw-------  1 root  wheel       1, 0x00000000 Oct  5 21:48 devctl
crw-------  1 root  wheel       0, 0x00000000 Oct  5 21:48 devfs
drwxr-xr-x  1 root  wheel          232 Oct  5 21:48 fd
crw-------  1 root  wheel       6, 0x0000000e Oct  5 21:48 io
crw-------  1 root  wheel       3, 0x00000000 Oct  5 21:48 kbd0
crw-------  1 root  wheel       3, 0x00000001 Oct  5 21:48 kbd1
crw-------  1 root  wheel       3, 0x00000002 Oct  5 21:52 kbd2
crw-------  1 root  wheel       9, 0x00000000 Oct  5 21:48 klog
crw-r-----  1 root  kmem        6, 0x00000001 Oct  5 21:48 kmem
crw-r-----  1 root  operator   13, 0x1e110007 Oct  5 21:48 md0
crw-r-----  1 root  kmem        6, 0x00000000 Oct  5 21:48 mem
crw-------  1 root  wheel      30, 0x0000004c Oct  5 21:48 mfs76
crw-------  1 root  wheel      30, 0x0000004e Oct  5 21:48 mfs78
crw-------  1 root  wheel      30, 0x00000050 Oct  5 21:48 mfs80
crw-------  1 root  wheel      30, 0x00000052 Oct  5 21:49 mfs82
crw-------  1 root  wheel      30, 0x00000054 Oct  5 21:49 mfs84
crw-rw-rw-  1 root  wheel       6, 0x00000002 Oct  5 21:49 null
crw-------  1 root  operator   26, 0x00000000 Oct  5 21:48 pass0
crw-------  1 root  operator   26, 0x00000008 Oct  5 21:52 pass8
crw-------  1 root  operator   26, 0x00000009 Oct  5 21:52 pass9
crw-r--r--  1 root  wheel       2, 0x00000000 Oct  5 21:48 pci
crw-rw-rw-  1 root  wheel      17, 0x00000001 Oct  5 21:48 psm0
crw-rw-rw-  1 root  wheel       7, 0xffff00ff Oct  5 21:48 ptmx
crw-r--r--  1 root  wheel       6, 0x00000003 Oct  5 21:48 random
drwxr-xr-x  1 root  wheel          232 Oct  5 21:48 serno
crw-------  1 root  operator   27, 0x00000000 Oct  5 21:48 sg0
crw-------  1 root  operator   27, 0x00000008 Oct  5 21:52 sg8
crw-------  1 root  operator   27, 0x00000009 Oct  5 21:52 sg9
crw-------  1 root  operator   27, 0x00000000 Oct  5 21:48 sga
crw-------  1 root  operator   27, 0x00000008 Oct  5 21:52 sgi
crw-------  1 root  operator   27, 0x00000009 Oct  5 21:52 sgj
crw-rw-rw-  1 root  wheel      11, 0x00000002 Oct  5 21:48 stderr
crw-rw-rw-  1 root  wheel      11, 0x00000000 Oct  5 21:48 stdin
crw-rw-rw-  1 root  wheel      11, 0x00000001 Oct  5 21:48 stdout
crw-------  1 root  wheel      10, 0x00000080 Oct  5 21:48 sysmouse
crw-rw-rw-  1 root  wheel       5, 0x00000000 Oct  5 21:48 tty
crw-------  1 root  wheel      18, 0x00000000 Oct  5 21:48 ttyd0
crw-------  1 root  wheel      18, 0x00000020 Oct  5 21:48 ttyid0
crw-------  1 root  wheel      18, 0x00000040 Oct  5 21:48 ttyld0
crw-------  1 root  tty        23, 0x00000000 Oct  5 21:56 ttyv0
crw-------  1 root  wheel      23, 0x00000001 Oct  5 21:48 ttyv1
crw-------  1 root  wheel      23, 0x00000002 Oct  5 21:49 ttyv2
crw-------  1 root  wheel      23, 0x00000003 Oct  5 21:49 ttyv3
crw-------  1 root  wheel      23, 0x00000004 Oct  5 21:49 ttyv4
crw-------  1 root  wheel      23, 0x00000005 Oct  5 21:49 ttyv5
crw-------  1 root  wheel      23, 0x00000006 Oct  5 21:49 ttyv6
crw-------  1 root  wheel      23, 0x00000007 Oct  5 21:49 ttyv7
crw-------  1 root  wheel      23, 0x00000008 Oct  5 21:48 ttyv8
crw-------  1 root  wheel      23, 0x00000009 Oct  5 21:48 ttyv9
crw-------  1 root  wheel      23, 0x0000000a Oct  5 21:48 ttyva
crw-------  1 root  wheel      23, 0x0000000b Oct  5 21:48 ttyvb
crw-------  1 root  wheel      23, 0x0000000c Oct  5 21:48 ttyvc
crw-------  1 root  wheel      23, 0x0000000d Oct  5 21:48 ttyvd
crw-------  1 root  wheel      23, 0x0000000e Oct  5 21:48 ttyve
crw-------  1 root  wheel      23, 0x0000000f Oct  5 21:48 ttyvf
crw-------  1 uucp  dialer     24, 0xffff00ff Oct  5 21:48 tun
crw-------  1 uucp  dialer     24, 0x00000000 Oct  5 21:48 tun0
crw-------  1 uucp  dialer     24, 0x00000001 Oct  5 21:48 tun1
crw-------  1 uucp  dialer     24, 0x00000002 Oct  5 21:48 tun2
crw-------  1 uucp  dialer     24, 0x00000003 Oct  5 21:48 tun3
crw-r--r--  1 root  operator   21, 0x00000000 Oct  5 21:52 ugen0
crw-r--r--  1 root  operator   21, 0x00000001 Oct  5 21:52 ugen0.1
crw-r--r--  1 root  operator   21, 0x00000002 Oct  5 21:52 ugen0.2
crw-r--r--  1 root  operator   21, 0x00000003 Oct  5 21:52 ugen0.3
crw-r--r--  1 root  operator   22, 0x00000000 Oct  5 21:52 ums0
crw-r--r--  1 root  wheel       6, 0x00000004 Oct  5 21:48 urandom
crw-rw----  1 root  operator   19, 0x000000ff Oct  5 21:48 usb
crw-rw----  1 root  operator   19, 0x00000000 Oct  5 21:48 usb0
crw-rw----  1 root  operator   19, 0x00000001 Oct  5 21:48 usb1
crw-rw----  1 root  operator   19, 0x00000002 Oct  5 21:48 usb2
crw-rw----  1 root  operator   19, 0x00000003 Oct  5 21:48 usb3
crw-rw----  1 root  operator   19, 0x00000004 Oct  5 21:48 usb4
crw-rw----  1 root  operator   19, 0x00000005 Oct  5 21:52 usb5
crw-rw----  1 root  operator   19, 0x00000006 Oct  5 21:52 usb6
crw-------  1 root  operator   25, 0x00000000 Oct  5 21:48 xpt0
crw-rw-rw-  1 root  wheel       6, 0x0000000c Oct  5 21:48 zero

hostb0@pci0:0:0:0:	class=0x060000 card=0x20b117aa chip=0x2a008086 rev=0x0c hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:	class=0x060400 card=0x20b217aa chip=0x2a018086 rev=0x0c hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 Express PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
em0@pci0:0:25:0:	class=0x020000 card=0x20b917aa chip=0x10498086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82566MM NIC Gigabit Network Connection Interface Controller'
    class      = network
    subclass   = ethernet
uhci0@pci0:0:26:0:	class=0x0c0300 card=0x20aa17aa chip=0x28348086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:26:1:	class=0x0c0300 card=0x20aa17aa chip=0x28358086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:26:7:	class=0x0c0320 card=0x20ab17aa chip=0x283a8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
none0@pci0:0:27:0:	class=0x040300 card=0x20ac17aa chip=0x284b8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H Intel audio controller embedded with the 82801H chipset ( ICH8 chipset )'
    class      = multimedia
    subclass   = HDA
pcib2@pci0:0:28:0:	class=0x060400 card=0x20ad17aa chip=0x283f8086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:1:	class=0x060400 card=0x20ad17aa chip=0x28418086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:2:	class=0x060400 card=0x20ad17aa chip=0x28438086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:0:28:3:	class=0x060400 card=0x20ad17aa chip=0x28458086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 4'
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:0:28:4:	class=0x060400 card=0x20ad17aa chip=0x28478086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 5'
    class      = bridge
    subclass   = PCI-PCI
uhci2@pci0:0:29:0:	class=0x0c0300 card=0x20aa17aa chip=0x28308086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:1:	class=0x0c0300 card=0x20aa17aa chip=0x28318086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
uhci4@pci0:0:29:2:	class=0x0c0300 card=0x20aa17aa chip=0x28328086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
ehci1@pci0:0:29:7:	class=0x0c0320 card=0x20ab17aa chip=0x28368086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB2 EHCI'
    class      = serial bus
    subclass   = USB
pcib7@pci0:0:30:0:	class=0x060401 card=0x20ae17aa chip=0x24488086 rev=0xf3 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x20b617aa chip=0x28118086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801HBM (ICH8M) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:	class=0x01018a card=0x20a617aa chip=0x28508086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
    class      = mass storage
    subclass   = ATA
ahci0@pci0:0:31:2:	class=0x010601 card=0x20a717aa chip=0x28298086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
none1@pci0:0:31:3:	class=0x0c0500 card=0x20a917aa chip=0x283e8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
vgapci0@pci0:1:0:0:	class=0x030000 card=0x20d917aa chip=0x040c10de rev=0xa1 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'NVIDIA Quadro NVS 570M Mobile Quadro FX/NVS video card'
    class      = display
    subclass   = VGA
none2@pci0:2:0:0:	class=0x058000 card=0x444e8086 chip=0x444e8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'TurboMemory Intel TurboMemory'
    class      = memory
none3@pci0:3:0:0:	class=0x028000 card=0x11118086 chip=0x42308086 rev=0x61 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Intel 4965AGN Intel® Wireless WiFi Link 4965AGN'
    class      = network
cbb0@pci0:21:0:0:	class=0x060700 card=0x20c617aa chip=0x04761180 rev=0xba hdr=0x02
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'unknown Ricoh R/RL/5C476(II)'
    class      = bridge
    subclass   = PCI-CardBus
fwohci0@pci0:21:0:1:	class=0x0c0010 card=0x20c717aa chip=0x08321180 rev=0x04 hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = '30CF103C IEEE 1394 (4 pin firewire) chip)'
    class      = serial bus
    subclass   = FireWire
none4@pci0:21:0:2:	class=0x080500 card=0x20c817aa chip=0x08221180 rev=0x21 hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'R5C832, R5C843 SDA Standard Compliant SD Host Controller'
    class      = base peripheral
    subclass   = SD host controller
none5@pci0:21:0:3:	class=0x088000 card=0x20c917aa chip=0x08431180 rev=0x11 hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'R5C853 Ricoh SD/MMC Host Controller'
    class      = base peripheral
none6@pci0:21:0:4:	class=0x088000 card=0x20ca17aa chip=0x05921180 rev=0x11 hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = '13871043 Ricoh Memory Stick Host Controller'
    class      = base peripheral
none7@pci0:21:0:5:	class=0x088000 card=0x20cb17aa chip=0x08521180 rev=0x11 hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = '01cf1028 Ricoh xD-Picture Card Host Controller'
    class      = base peripheral



[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]