DragonFly BSD
DragonFly bugs List (threaded) for 2013-01
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

[DragonFlyBSD - Bug #2114] (Feedback) hammer volume-add causes panic


From: "Antonio M. Huete Jimenez via Redmine" <bugtracker-admin@xxxxxxxxxxxxxxxxxxxxx>
Date: Wed, 23 Jan 2013 16:17:05 -0800

Issue #2114 has been updated by tuxillo.

Status changed from New to Feedback
Assignee deleted (0)

Hi all,

I've done a couple tests, using partitions within a slice.
In my case I've added/removed 4 disks to the HAMMER filesystem and only had a couple problems. A panic has been recently fixed (commit 0465e1d385953232678697cd5c17964cf45eaf49).

Please report back whether whether it works for you.

Cheers,
Antonio Huete
----------------------------------------
Bug #2114: hammer volume-add causes panic
http://bugs.dragonflybsd.org/issues/2114

Author: mcy
Status: Feedback
Priority: Normal
Assignee: 
Category: 
Target version: 


Hello,

I have troubles trying to add a volume to my HAMMER root filesystem on a fresh 
install (DragonFly 2.10.1 i386, on an AMD Athlon 2000+ with 512 MB RAM). Maybe 
I'm doing something wrong, but if so I don't see what. I created a new 
partition table on the hard drive (ad2) with a DF slice (ad2s1), and a hammer 
partition on it (ad2s1d). Then I just run hammer volume-add /dev/ad2s1d /, and 
it panics.

If I add the volume to /boot/loader.conf and /etc/fstab, after a reboot I can 
see it in hammer volume-list, but hammer info gives exactly the same results 
as with only the first volume. hammer volume-del fails (device busy), but I can 
safely remove the new volume from loader.conf and fstab (I also tried without 
running volume-del, same thing).

It is fully reproducible, with this hard drive and with another one (and if I 
remember well, I had the same problem when I played with HAMMER in a KVM 
virtual machine some times ago).
The session log below shows how I reproduced the problem (with the same first 
drive). It seems that something was initialised, because I had to erase the 
beginning of the partition to re-add the volume.

Please tell me if I made a mistake somewhere, and if not what I can do to help 
solving the bug. I attached the crash info and core files (I can provide the 
full core dump if needed).

Cheers,

  Matteo

16:38 root@vicious ~# fdisk ad2
******* Working on device /dev/ad2 *******
parameters extracted from device are:
cylinders=24696 heads=256 sectors/track=63 (16128 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=24696 heads=256 sectors/track=63 (16128 blks/cyl)

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD)
    start 63, size 398297025 (194480 Meg), flag 80 (active)
	beg: cyl 0/ head 1/ sector 1;
	end: cyl 1023/ head 255/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
16:39 root@vicious ~# disklabel ad2s1
# /dev/ad2s1:
#
# Informational fields calculated from the above
# All byte equivalent offsets must be aligned
#
# boot space:    1044992 bytes
# data space:  199147483 blocks	# 194479.96 MB (203927023104 bytes)
#
# NOTE: If the partition data base looks odd it may be
#       physically aligned instead of slice-aligned
#
diskid: 076febcf-c669-11e0-bb09-01138f237da1
label: 
boot2 data base:      0x000000001000
partitions data base: 0x000000100200
partitions data stop: 0x002f7b0f7000
backup label:         0x002f7b0f7000
total size:           0x002f7b0f8200	# 194480.97 MB
alignment: 4096
display block size: 1024	# for partition display only

16 partitions:
#          size     offset    fstype   fsuuid
  d:  199147480          0    HAMMER	#  194479.961MB
  d-stor_uuid: 5191beaf-c67a-11e0-9d47-01138f237da1
16:40 root@vicious ~# hammer volume-add /dev/ad2s1d /
hammer volume-add ioctl: Inappropriate file type or format
16:41 root@vicious ~# dd if=/dev/zero of=/dev/ad2s1d bs=1M count=1
1+0 records in
1+0 records out
1048576 bytes transferred in 0.037720 secs (27798965 bytes/sec)
16:42 root@vicious ~# hammer volume-add /dev/ad2s1d /             

An error occurred: 79
panic: hammer_io_set_modlist: duplicate entry
Trace beginning at frame 0xcc2e37a0
panic(ffffffff,c07acd60,c06bfbbc,cc2e37d0,c1cadf30) at panic+0x101
panic(c06bfbbc,c1cadf30,0,c1cadf38,c9d69670) at panic+0x101
hammer_io_modify(cc2e3880,cc2e3814,c0533fbe,c1cadf38,1) at 
hammer_io_modify+0x186
hammer_modify_volume(cc2e3a30,c1cadf30,c5b88094,4,cc2e3860) at 
hammer_modify_volume+0x4a
hammer_ioc_volume_add(cc2e3a30,c9dd44e0,c97ca258,c1d9f950,c1d9f954) at 
hammer_ioc_volume_add+0x49a
hammer_ioctl(c9dd44e0,c4306811,c97ca258,1,c7d91ba8) at hammer_ioctl+0xf41
hammer_vop_ioctl(cc2e3a98,c0725d48,c1d80e00,cc1c7498,cc2e3ae8) at 
hammer_vop_ioctl+0x5e
vop_ioctl(c1d80e00,c1db8538,c4306811,c97ca258,1) at vop_ioctl+0x75
vn_ioctl(c7dcf1e8,c4306811,c97ca258,c7d91ba8,cc2e3cf0) at vn_ioctl+0x106
fo_ioctl(c7d91ba8,cc2e3cf0,430,c7dc0000,c7dc0000) at fo_ioctl+0x3c
mapped_ioctl(3,c4306811,bfbff280,0,cc2e3cf0) at mapped_ioctl+0x4ae
sys_ioctl(cc2e3cf0,cc2e3d00,c,c9743158,cc2e3cf0) at sys_ioctl+0x2e
syscall2(cc2e3d40) at syscall2+0x232
Xint0x80_syscall() at Xint0x80_syscall+0x36
Debugger("panic")
Stopped at   Debugger+0x3f: movb   $0,in_Debugger.4431


-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account



[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]