Re: ACPI was the culprit

[Hiten Pandya <hmp@xxxxxxxxxxxxx>]

Dave Leimbach wrote:
> David Rhodus <drhodus@xxxxxxxxxxx> writes:
>
> Then it's a completely different issue causing the boot problem on DragonFly:
>
> I tried all of the following and I still get hung up just after the detection
> of my DVD-ROM.
>
> hint.acpi.0.disabled=1 # disable ACPI (i386 only)
> hw.ata.ata_dma=0       # disable IDE DMA
> hw.ata.atapi_dma=0     # disable ATAPI/IDE DMA
> hw.ata.wc=0            # disable IDE disk write cache
> hw.eisa_slots=0        # disable probing for EISA devices
>
> I built the GENERIC kernel and that doesn't boot.

	Have you tried removing APM?  APM is enabled in the GENERIC
	kernel, and it can possibly be the culprit.

	Regards,

		-- Hiten