DragonFly BSD
DragonFly kernel List (threaded) for 2006-08
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: System downtime wednesday for maintainance.

From: "Jonas Trollvik" <jontro@xxxxxxxxx>
Date: Thu, 17 Aug 2006 00:46:05 +0200

I had no problems configuring apcupsd as I did a month ago using
pkgsrc on DragonFly.
Im using a BackupUPS Pro 1400 with a custom made smartups serial cable.
relevant aucupsd options I used were
UPSTYPE smartups
DEVICE /dev/ttyd0

Would be nice if we were able to use the killpower command after disk
syncing, however this might be hard to accomplish with the current
shutdown sequence.

Jonas Trollvik

On 8/16/06, Matthew Dillon <dillon@xxxxxxxxxxxxxxxxxxxx> wrote:
   This is going to take longer then I thought.  I've already spent 2 hours
   trying to figure out why the apcupsd port doesn't work.  I finally
   tracked it down to yet another ./configure script screwup.  configure
   is unbelievably broken.  It decided that since it didn't know what
   OS DragonFly was, that it wasn't going to bother configuring the serial
   port's baud rate.

                                       Matthew Dillon

[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]