DragonFly BSD
DragonFly submit List (threaded) for 2005-12
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: Rework of nrelease


From: joerg@xxxxxxxxxxxxxxxxx
Date: Fri, 9 Dec 2005 17:00:07 +0100
Mail-followup-to: submit@crater.dragonflybsd.org

On Wed, Dec 07, 2005 at 11:04:36AM -0800, Matthew Dillon wrote:
> 
>     I don't want to make the nrelease build dependant on a
>     binary packages directory sitting on packages.stura.uni-rostock.de.
>     Also, the 'check' target and the other convenience targets (to
>     fetch and configure pkgsrc and/or fetch required packages) need
>     to remain intact.  I don't want programmers to be forced to use
>     obscure -D<LABEL> names to build common targets.  The check target
>     in particular is very important as it prevents the user from having
>     to run through an entire buildworld before being told that something
>     is missing.

Added compatibility targets installer_* (yes, I'd like to remove them at
some point in the future), added basic check target.

If no further objections occur, I'll commit this tomorrow.

If someone wants to update the cgi installer configuration, I'll provide
the package for that as well.

Joerg
Index: Makefile
===================================================================
RCS file: /cvs/src/nrelease/Makefile,v
retrieving revision 1.44
diff -u -r1.44 Makefile
--- Makefile	4 Dec 2005 21:24:13 -0000	1.44
+++ Makefile	8 Dec 2005 14:27:12 -0000
@@ -1,33 +1,47 @@
-# $DragonFly: src/nrelease/Makefile,v 1.44 2005/12/04 21:24:13 dillon Exp $
+# $DragonFly$
 #
 
+all: release
+
+# compat target
+installer_release: release
+installer_quickrel: 
+installer_realquickrel: realquickrel
+
+.if make(installer_release) || make(installer_quickrel) || make(installer_realquickrel)
+WITH_INSTALLER=
+.endif
+
 ISODIR ?= /usr/release
 ISOFILE ?= ${ISODIR}/dfly.iso
 ISOROOT = ${ISODIR}/root
 OBJSYS= ${.OBJDIR}/../sys
 KERNCONF ?= GENERIC
-PKG_PATH= /usr/freebsd_pkg/sbin
 
-# Specify which packages are required on the ISO, and let the user
-# specify additional packages to include.  During the `pkgaddiso'
-# target, the packages are obtained from PACKAGES_LOC.
-#
-REQ_PACKAGES= cdrtools-2.01 cvsup-without-gui-16.1h
-REL_PACKAGES?= ${REQ_PACKAGES} ${EXTRA_PACKAGES}
-.if defined(PACKAGES)
-PACKAGES_LOC?= ${PACKAGES}/All
-.else
-PACKAGES_LOC?= /usr/ports/packages/All
-.endif
-PACKAGE_SITES?=http://www.bsdinstaller.org/packages/ \
-	       http://cvs.bsdinstaller.org/packages/
+PKGSRC_PKG_ADD?=	/usr/pkg/sbin/pkg_add
+PKGSRC_PKG_PATH?=	${.CURDIR}
+PKGSRC_BOOTSTRAP_FILE?=	${PKGSRC_PKG_PATH}/bootstrap-20051127.tar.gz
+PKGSRC_DB?=		/var/db/pkg
+PKGSRC_PREFIX?=		/usr/pkg
+PKGSRC_RSYNC_SRC?=	rsync://packages.stura.uni-rostock.de/dfly14-nrelease
+
+ENV?=	env
+TAR?=	tar
+RSYNC_CMD?=	rsync -avz
+
+PKGSRC_PACKAGES?=	cdrecord
 
 # Specify which root skeletons are required, and let the user include
 # their own.  They are copied into ISODIR during the `pkgcustomizeiso'
 # target; each overwrites the last.
 #
 REQ_ROOTSKELS= ${.CURDIR}/root
-ROOTSKELS?= ${REQ_ROOTSKELS} ${EXTRA_ROOTSKELS}
+ROOTSKELS?=	${REQ_ROOTSKELS}
+
+.if defined(WITH_INSTALLER)
+PKGSRC_PACKAGES+=	dfuibe_installer dfuife_curses
+ROOTSKELS+=		installer
+.endif
 
 # note: we use the '${NRLOBJDIR}/nrelease' construct, that is we add
 # the additional '/nrelease' manually, as a safety measure.
@@ -42,117 +56,20 @@
 #########################################################################
 
 release:	check clean buildworld1 buildkernel1 \
-		buildiso customizeiso pkgaddiso mklocatedb mkiso
+		buildiso customizeiso mklocatedb mkiso
 
 quickrel:	check clean buildworld2 buildkernel2 \
-		buildiso customizeiso pkgaddiso mklocatedb mkiso
-
-realquickrel:	check clean \
-		buildiso customizeiso pkgaddiso mklocatedb mkiso
-
-#########################################################################
-#			ISO TARGETS WITH INSTALLER			#
-#########################################################################
-
-INSTALLER_PKGS= libaura-3.1 libdfui-4.1 libinstaller-5.1 \
-		dfuibe_installer-1.1.6 dfuife_curses-1.5 \
-		thttpd-notimeout-2.24 dfuife_cgi-1.4
-INSTALLER_SKELS= installer
-
-INSTALLER_ENV= EXTRA_PACKAGES="${INSTALLER_PKGS} ${EXTRA_PACKAGES}" \
-		EXTRA_ROOTSKELS="${INSTALLER_SKELS} ${EXTRA_ROOTSKELS}"
+		buildiso customizeiso mklocatedb mkiso
 
-installer_check:
-		@${INSTALLER_ENV} ${MAKE} check
-
-installer_fetchpkgs:
-		@${INSTALLER_ENV} ${MAKE} fetchpkgs
-
-installer_release:
-		${INSTALLER_ENV} ${MAKE} release
-
-installer_quickrel:
-		${INSTALLER_ENV} ${MAKE} quickrel
-
-installer_realquickrel:
-		${INSTALLER_ENV} ${MAKE} realquickrel
-
-#########################################################################
-#				HELPER TARGETS				#
-#########################################################################
+realquickrel:	check clean buildiso customizeiso mklocatedb mkiso
 
 check:
-	@if [ ! -f /usr/local/bin/mkisofs ]; then \
-		echo "You need to install the sysutils/cdrtools port for"; \
-		echo "this target"; \
-		exit 1; \
-	fi
-.for PKG in ${REL_PACKAGES}
-	@if [ ! -f ${PACKAGES_LOC}/${PKG}.tgz ]; then \
-		echo "Unable to find ${PACKAGES_LOC}/${PKG}.tgz."; \
-		echo "(Perhaps you need to download or build it first?)"; \
-		echo ""; \
-		echo "If you are trying to build the installer, the"; \
-		echo "required packages can be obtained from:"; \
-		echo ""; \
-		echo "    http://www.bsdinstaller.org/packages/";; \
-		echo ""; \
-		echo "They can be automatically downloaded by issuing:"; \
-		echo "    make installer_fetchpkgs"; \
-		echo ""; \
-		exit 1; \
-	fi
-.endfor
-	@if [ ! -f /usr/pkg/sbin/pkg_add ]; then \
-		echo "NetBSD pkgsrc has not been bootstrapped.  You can"; \
-		echo "automatically download the pkgsrc and install the"; \
-		echo "the bootstrap with:"; \
-		echo "    make pkgsrc_fetch"; \
-		echo "    make pkgsrc_bootstrap"; \
-		exit 1; \
-	fi
-	@if [ ! -f /etc/mk.conf ]; then \
-		echo "NetBSD pkgsrc: /etc/mk.conf must exist.  You can"; \
-		echo "automatically create this file with:"; \
-		echo "    make pkgsrc_conf"; \
-		exit 1; \
-	fi
-	@echo "check: all preqs found"
-
-pkgsrc_fetch:
-	cd /usr
-	cvs -d anoncvs@xxxxxxxxxxxxxxxxxxxxx:/cvsroot checkout pkgsrc
-
-pkgsrc_bootstrap:
-	rm -rf /tmp/bootstrap-workdir
-	cd /usr/pkgsrc/bootstrap && ./bootstrap --workdir=/tmp/bootstrap-workdir
-	rm -rf /tmp/bootstrap-workdir
-	fgrep -q LOCALBASE /etc/mk.conf || (echo "you may also have to run make pkgsrc_conf to initialize /etc/mk.conf")
-
-pkgsrc_conf:
-.if !exists(/etc/mk.conf) 
-	cp ${.CURDIR}/mk.conf.pkgsrc /etc/mk.conf
-.else
-	fgrep -q BSD_PKG_MK /etc/mk.conf || cat ${.CURDIR}/mk.conf.pkgsrc >> /etc/mk.conf
-.endif
-
-fetchpkgs:
-.for PKG in ${REL_PACKAGES}
-	@if [ ! -f ${PACKAGES_LOC}/${PKG}.tgz ]; then \
-		cd ${PACKAGES_LOC} && \
-		echo "fetching ${PKG}..." && \
-		for SITE in ${PACKAGE_SITES}; do \
-			if [ ! -f ${PKG}.tgz ]; then \
-				fetch $${SITE}${PKG}.tgz || \
-				    echo "Not available from $${SITE}"; \
-			fi; \
-		done; \
-		if [ ! -f ${PKG}.tgz ]; then \
-			echo "Couldn't retrieve ${PKG}.tgz!"; \
-			exit 1; \
-		fi; \
-	fi
-.endfor
+	@${ECHO} Testing mkisofs...
+	@mkisofs --version > /dev/null
+	@${ECHO} Testing pkg_add and list of packages...
+	@${ENV} PKG_PATH=${PKGSRC_PKG_PATH} ${PKGSRC_PKG_ADD} -n ${PKGSRC_PACKAGES} > /dev/null 2>&1
+	@${ECHO} Testing for existence of bootstrap kit...
+	@[ -r ${PKGSRC_BOOTSTRAP_FILE} ]
 
 buildworld1:
 	( cd ${.CURDIR}/..; CCVER=${WORLD_CCVER} make buildworld )
@@ -186,8 +103,6 @@
 	dev_mkdb -f ${ISOROOT}/var/run/dev.db ${ISOROOT}/dev
 
 customizeiso:
-	cd /usr/pkgsrc/bootstrap && ./bootstrap --workdir=${NRLOBJDIR}/nrelease/bootstrap-workdir --prefix=${ISOROOT}/usr/pkg
-	cp ${.CURDIR}/mk.conf.pkgsrc ${ISOROOT}/etc/mk.conf
 .for ROOTSKEL in ${ROOTSKELS}
 	cpdup -X cpignore -o ${ROOTSKEL} ${ISOROOT}
 .endfor
@@ -205,36 +120,9 @@
 		     periodic/monthly/Makefile
 	cp -R ${.CURDIR}/../etc/${UPGRADE_ITEM} ${ISOROOT}/etc/${UPGRADE_ITEM}
 .endfor
-
-pkgcleaniso:
-	rm -f ${ISOROOT}/tmp/chrootscript
-	echo "#!/bin/sh" > ${ISOROOT}/tmp/chrootscript
-.for PKG in ${REL_PACKAGES}
-	echo "${PKG_PATH}/pkg_delete -f ${PKG}" >> ${ISOROOT}/tmp/chrootscript
-.endfor
-	chmod a+x ${ISOROOT}/tmp/chrootscript
-	chroot ${ISOROOT}/ /tmp/chrootscript || exit 0
-	rm ${ISOROOT}/tmp/chrootscript
-
-pkgaddiso:
-	rm -f ${ISOROOT}/tmp/chrootscript
-	echo "#!/bin/sh" > ${ISOROOT}/tmp/chrootscript
-.for PKG in ${REL_PACKAGES}
-	if [ ! -d ${ISOROOT}/var/db/pkg/${PKG} ]; then \
-		cp ${PACKAGES_LOC}/${PKG}.tgz ${ISOROOT}/tmp/${PKG}.tgz; \
-		echo "echo 'Installing package ${PKG}...' && \\" >> \
-		    ${ISOROOT}/tmp/chrootscript; \
-		echo "${PKG_PATH}/pkg_add /tmp/${PKG}.tgz && \\" >> \
-		    ${ISOROOT}/tmp/chrootscript; \
-	fi
-.endfor
-	echo "echo 'All packages added successfully!'" >> \
-	    ${ISOROOT}/tmp/chrootscript
-	chmod a+x ${ISOROOT}/tmp/chrootscript
-	chroot ${ISOROOT}/ /tmp/chrootscript
-	rm ${ISOROOT}/tmp/chrootscript
-.for PKG in ${REL_PACKAGES}
-	rm -f ${ISOROOT}/tmp/${PKG}.tgz
+	cd ${ISOROOT} && ${TAR} xzf ${PKGSRC_BOOTSTRAP_FILE}
+.for pkg in ${PKGSRC_PACKAGES}
+	${ENV} PKG_PATH=${PKGSRC_PKG_PATH} ${PKGSRC_PKG_ADD} -I -K ${ISOROOT}${PKGSRC_DB} -p ${ISOROOT}${PKGSRC_PREFIX} ${pkg}
 .endfor
 
 mklocatedb:
@@ -249,7 +137,6 @@
 		-R -J -V DragonFly -o ${ISOFILE} . )
 
 clean:
-	rm -rf /tmp/bootstrap-workdir
 	if [ -d ${ISOROOT} ]; then chflags -R noschg ${ISOROOT}; fi
 	if [ -d ${ISOROOT} ]; then rm -rf ${ISOROOT}/*; fi
 	if [ -d ${NRLOBJDIR}/nrelease ]; then rm -rf ${NRLOBJDIR}/nrelease; fi
@@ -257,4 +144,13 @@
 realclean:	clean
 	rm -rf ${OBJSYS}/${KERNCONF}
 
+fetch:
+	mkdir -p ${PKGSRC_PKG_PATH}
+	${RSYNC_CMD} ${PKGSRC_RSYNC_SRC} ${PKGSRC_PKG_PATH}
+
+.PHONY: all release installer_release quickrel installer_quickrel realquickrel
+.PHONY: installer_realquickrel check buildworld1 buildworld2
+.PHONY: buildkernel1 buildkernel2 buildiso customizeiso mklocatedb mkiso
+.PHONE: clean realclean fetch
+
 .include <bsd.prog.mk>
Index: installer/etc/defaults/pfi.conf
===================================================================
RCS file: /cvs/src/nrelease/installer/etc/defaults/pfi.conf,v
retrieving revision 1.5
diff -u -r1.5 pfi.conf
--- installer/etc/defaults/pfi.conf	20 Mar 2005 03:54:01 -0000	1.5
+++ installer/etc/defaults/pfi.conf	8 Dec 2005 14:27:12 -0000
@@ -18,10 +18,10 @@
 pfi_frontend="curses"
 
 # Determines which installer backend to use.  Typically this is
-# "/usr/local/sbin/dfuibe_installer", the traditional C backend,
+# "/usr/pkg/sbin/dfuibe_installer", the traditional C backend,
 # but can be changed to start an alternate backend.
 
-pfi_backend="/usr/local/sbin/dfuibe_installer"
+pfi_backend="/usr/pkg/sbin/dfuibe_installer"
 
 # When using the curses frontend:
 # Set the amount of time, in milliseconds, which must pass after
@@ -106,4 +106,4 @@
 # EXAMPLE 3:
 # Use a custom backend.
 #
-# pfi_backend="/usr/local/sbin/my_custom_backend"
+# pfi_backend="/usr/pkg/sbin/my_custom_backend"
Index: installer/usr/local/bin/installer
===================================================================
RCS file: /cvs/src/nrelease/installer/usr/local/bin/installer,v
retrieving revision 1.9
diff -u -r1.9 installer
--- installer/usr/local/bin/installer	2 Aug 2005 17:02:59 -0000	1.9
+++ installer/usr/local/bin/installer	8 Dec 2005 14:27:12 -0000
@@ -72,10 +72,10 @@
 		background_backend $RENDEZVOUS $pfi_dfui_transport &
 		sleep 1
 		ESCDELAY=$pfi_curses_escdelay \
-		    /usr/local/sbin/dfuife_curses \
+		    /usr/pkg/sbin/dfuife_curses \
 			-r $RENDEZVOUS \
 			-t $pfi_dfui_transport \
-			-b /usr/local/share/dfuife_curses/fred.txt \
+			-b /usr/pkg/share/dfuife_curses/fred.txt \
 		    2>/dev/null
 		pfi_frontend=none
 	fi
@@ -95,10 +95,10 @@
 			# Frontend is already running.
 		else
 			ESCDELAY=$pfi_curses_escdelay \
-			    /usr/local/sbin/dfuife_curses \
+			    /usr/pkg/sbin/dfuife_curses \
 				-r $RENDEZVOUS \
 				-t $pfi_dfui_transport \
-				-b /usr/local/share/dfuife_curses/fred.txt \
+				-b /usr/pkg/share/dfuife_curses/fred.txt \
 			    2>/dev/ttyv0 </dev/ttyv1 >/dev/ttyv1 &
 		fi
 		rm -f /tmp/ps.txt


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]