DragonFly BSD
DragonFly users List (threaded) for 2004-10
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

vmstat -i shows strange interrupts

From: Mark Cullen <mark.cullen@xxxxxxxxxxxxx>
Date: Wed, 20 Oct 2004 20:15:28 +0100

Hi there, got it installed :-)

I don't know why I went to check vmstat -i, but when I did I got a bit of strangeness.

-- vmstat --
beast# vmstat -i
interrupt                   total       rate
???                             0          0
stray irq0                      0          0
stray irq1                      0          0
stray irq2                      0          0
stray irq3                      0          0
stray irq4                      0          0
stray irq5                      0          0
stray irq6                      0          0
stray irq7                      0          0
stray irq8                      0          0
stray irq9                      0          0
stray irq10                     0          0
stray irq11                     0          0
stray irq12                     0          0
stray irq13                     0          0
stray irq14                     0          0
stray irq15                     0          0
acpi0 irq9                      0          0
ata0 irq14                  69553         22
ata1 irq15                     24          0
uhci0 irq11                     0          0
mux irq11                   42624         13
atkbd0 irq1                  3361          1
psm0 irq12                      0          0
sio0 irq4                       0          0
sio1 irq3                       0          0
ppc0 irq7                       0          0
clk irq0                   698586        226
Total                      814148        263

What's with all the strange stray's? Is this normal? It doesn't seem to be affecting much but then it doesn't look quite right either. Where's my fxp0 card too! Is this perhaps an ACPI issue? All I can think of sending you at the minute is a dmesg, would you like to see anything else or is it a harmless ignorable problem? I know I didn't get anything like this with 5.x for what it's worth.

I'm now cvsupping stable, so I'll let you know if it's the same with stable tomorrow most likely ( I have to sleep some time :) )

-- dmesg --
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.1-CURRENT #0: Mon Sep 13 10:10:56 PDT 2004
TSC clock: 849883438 Hz, i8254 clock: 1193154 Hz
CPU: Intel Celeron (849.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6

real memory = 402587648 (393152K bytes)
avail memory = 379908096 (371004K bytes)
Preloaded elf kernel "/kernel" at 0xc065b000.
Preloaded elf module "/modules/acpi.ko" at 0xc065b1e8.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdbd0
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
acpi0: <GBT AWRDACPI> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
pcib1: couldn't read bus number from cfg space
pcib1: trying bus number 1
pci1: <ACPI PCI bus> on pcib1
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib2: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci2: <PCI bus> on pcib2
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 11 at device 7.2 on pci0
installed MI handler for int 11
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <3Dfx Voodoo 3 graphics accelerator> at 8.0 irq 10
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xe2000000-0xe20fffff,0xe2120000-0xe2120fff irq 11 at device 11.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: MAC address: 00:06:29:71:7b:fb
pci0: <unknown card> (vendor=0x12eb, dev=0x0001) at 12.0 irq 10
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ad0: 10300MB <FUJITSU MPD3108AT> [20928/16/63] at ata0-master UDMA33
acd0: CDROM <CREATIVE CD5233E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <CREATIVE CD5233E 2.02> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present

Internet Explorer? Try FireFox at http://www.mozilla.org/products/firefox/
Outlook Express? Try ThunderBird at http://www.mozilla.org/products/thunderbird/

[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]