DragonFly users List (threaded) for 2007-08
DragonFly BSD
DragonFly users List (threaded) for 2007-08
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: "New" DragonFly user


From: Andre LeClaire <aleclaire@xxxxxxxxx>
Date: Mon, 27 Aug 2007 18:39:59 -0400

I'm not sure whether users on this list prefer top or bottom posting, so I've included the verbose dmesg below. I'll try disabling ACPI, and see if that makes a difference.

Thanks for your help!

Andre


Simon 'corecode' Schubert wrote:
Andre LeClaire wrote:
The only problem I've experienced is that the floppy drive is no longer recognized. It's configured in the kernel, but I get "fdc0: cannot reserve I/O port range" in dmesg. I know floppies are antique, but it would be nice if I could get it to work again. Can anybody give any clues?

Not that I have a solution, but just to add another data point: are you using ACPI? what happens if you don't/do? Could you please post a verbose dmesg, i.e. boot -v at loader?


Thanks
 simon



Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.10.1-RELEASE #0: Mon Aug 27 18:01:07 EDT 2007
    root@farout.lostfork.net:/usr/src/sys/compile/FAROUT
Calibrating clock(s) ... TSC clock: 870288686 Hz, i8254 clock: 1193084 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel Pentium III (870.37-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268419072 (262128K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004d1000 - 0x0ffebfff, 263303168 bytes (64283 pages)
avail memory = 252559360 (246640K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f9140
bios32: Entry = 0xf06a0 (c00f06a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x6d0
pnpbios: Found PnP BIOS data at 0xc00fc110
pnpbios: Entry = f0000:c140 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc04a4000.
Preloaded elf module "/modules/acpi.ko" at 0xc04a41e8.
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25018086)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f0c90
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 30 A 0x60 3 4 5 7 9 10 11 12
embedded 0 30 B 0x61 3 4 5 7 9 10 11 12
embedded 0 30 C 0x62 3 4 5 7 9 10 11 12
embedded 0 30 D 0x63 3 4 5 7 9 10 11 12
slot 1 2 8 A 0x60 3 4 5 7 9 10 11 12
slot 1 2 8 B 0x61 3 4 5 7 9 10 11 12
slot 1 2 8 C 0x62 3 4 5 7 9 10 11 12
slot 1 2 8 D 0x63 3 4 5 7 9 10 11 12
slot 2 2 9 A 0x61 3 4 5 7 9 10 11 12
slot 2 2 9 B 0x62 3 4 5 7 9 10 11 12
slot 2 2 9 C 0x63 3 4 5 7 9 10 11 12
slot 2 2 9 D 0x60 3 4 5 7 9 10 11 12
slot 3 2 10 A 0x62 3 4 5 7 9 10 11 12
slot 3 2 10 B 0x63 3 4 5 7 9 10 11 12
slot 3 2 10 C 0x60 3 4 5 7 9 10 11 12
slot 3 2 10 D 0x61 3 4 5 7 9 10 11 12
slot 4 2 11 A 0x63 3 4 5 7 9 10 11 12
slot 4 2 11 B 0x60 3 4 5 7 9 10 11 12
slot 4 2 11 C 0x61 3 4 5 7 9 10 11 12
slot 4 2 11 D 0x62 3 4 5 7 9 10 11 12
slot 5 2 14 A 0x62 3 4 5 7 9 10 11 12
slot 5 2 14 B 0x63 3 4 5 7 9 10 11 12
slot 5 2 14 C 0x60 3 4 5 7 9 10 11 12
slot 5 2 14 D 0x61 3 4 5 7 9 10 11 12
embedded 0 31 A 0x60 3 4 5 7 9 10 11 12
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12
embedded 0 31 C 0x62 3 4 5 7 9 10 11 12
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12
ACPI: RSDP @ 0x0xf5a20/0x0014 (v 0 ASUS )
ACPI: RSDT @ 0x0xfffc000/0x002C (v 1 ASUS P3C-2000 0x30303031 MSFT 0x31313031)
ACPI: FACP @ 0x0xfffc080/0x0074 (v 1 ASUS P3C-2000 0x30303031 MSFT 0x31313031)
ACPI: DSDT @ 0x0xfffc100/0x2CDF (v 1 ASUS P3C-2000 0x00001000 MSFT 0x0100000B)
ACPI: FACS @ 0x0xffff000/0x0040
ACPI: BOOT @ 0x0xfffc040/0x0028 (v 1 ASUS P3C-2000 0x30303031 MSFT 0x31313031)
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <ASUS P3C-2000> [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0xe408-0xe40b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0xe408-0xe40b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu0: <ACPI CPU> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <ASUS P3C-2000> [attached!] at irq 9 on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
map[10]: type 1, range 32, base e4000000, size 26
found-> vendor=0x8086, dev=0x2501, revid=0x03
bus=0, slot=0, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x250f, revid=0x03
bus=0, slot=1, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
bus=0, slot=30, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
bus=0, slot=31, func=0
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000b800, size 4
found-> vendor=0x8086, dev=0x2411, revid=0x02
bus=0, slot=31, func=1
class=[STORAGE]01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000b400, size 5
found-> vendor=0x8086, dev=0x2412, revid=0x02
bus=0, slot=31, func=2
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 0000e800, size 4
found-> vendor=0x8086, dev=0x2413, revid=0x02
bus=0, slot=31, func=3
class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=10
agp0.pci0.pcib0.legacypci0.nexus0.root0
agp0: <Intel 82820 host to AGP bridge> [tentative] mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
agp0: <Intel 82820 host to AGP bridge> [attached!] mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=8086 device=250f)> [tentative] at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xd6000000-0xd6efffff
pcib1: prefetched decode 0xd7f00000-0xe3ffffff
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
map[10]: type 1, range 32, base d6000000, size 19
map[14]: type 1, range 32, base d8000000, size 27
found-> vendor=0x5333, dev=0x8a22, revid=0x04
bus=1, slot=0, func=0
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
pci1: <S3 Savage 4 graphics accelerator> (vendor=0x5333, dev=0x8a22) at 0.0 irq 11
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=8086 device=250f)> [attached!] at device 1.0 on pci0
pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> [tentative] at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xd4000000-0xd5ffffff
pcib2: prefetched decode 0xd6f00000-0xd7efffff
pcib2: Subtractively decoded bridge.
pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib2
pci2: pci_attach() physical bus=2
map[10]: type 1, range 32, base 0000d800, size 6
found-> vendor=0x1274, dev=0x1371, revid=0x06
bus=2, slot=9, func=0
class=[MULTIMEDIA]04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base d5800000, size 12
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=2, slot=10, func=0
class=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base d5000000, size 12
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=2, slot=10, func=1
class=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base d4800000, size 8
found-> vendor=0x1033, dev=0x00e0, revid=0x04
bus=2, slot=10, func=2
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=11
map[10]: type 1, range 32, base d7000000, size 12
map[14]: type 1, range 32, base 0000d400, size 5
map[18]: type 1, range 32, base d4000000, size 20
found-> vendor=0x8086, dev=0x1229, revid=0x04
bus=2, slot=11, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
pci2: <unknown card> (vendor=0x1274, dev=0x1371) at 9.0 irq 10
ohci0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
ohci0: <NEC uPD 9210 USB controller> [tentative] mem 0xd5800000-0xd5800fff irq 9 at device 10.0 on pci2
pcib2: device ohci0 requested decoded memory range 0xd5800000-0xd5800fff
usb0: OHCI version 1.0
usb0.ohci0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
usb0: <NEC uPD 9210 USB controller> [tentative] on ohci0
usb0: USB revision 1.0
uhub0: 2 ports with 2 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub2: 4 ports with 4 removable, self powered
usb0: <NEC uPD 9210 USB controller> [attached!] on ohci0
ohci0: <NEC uPD 9210 USB controller> [attached!] mem 0xd5800000-0xd5800fff irq 9 at device 10.0 on pci2
ohci1.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
ohci1: <NEC uPD 9210 USB controller> [tentative] mem 0xd5000000-0xd5000fff irq 9 at device 10.1 on pci2
pcib2: device ohci1 requested decoded memory range 0xd5000000-0xd5000fff
usb1: OHCI version 1.0
usb1.ohci1.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
usb1: <NEC uPD 9210 USB controller> [tentative] on ohci1
usb1: USB revision 1.0
uhub3: 1 port with 1 removable, self powered
usb1: <NEC uPD 9210 USB controller> [attached!] on ohci1
ohci1: <NEC uPD 9210 USB controller> [attached!] mem 0xd5000000-0xd5000fff irq 9 at device 10.1 on pci2
pci2: <USB controller> (vendor=0x1033, dev=0x00e0) at 10.2 irq 11
fxp0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
fxp0: <Intel 82558 Pro/100 Ethernet> [tentative] port 0xd400-0xd41f mem 0xd4000000-0xd40fffff,0xd7000000-0xd7000fff irq 9 at device 11.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xd7000000-0xd7000fff
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 0009 0004
fxp0: Dynamic Standby mode is disabled
miibus0.fxp0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
miibus0: <MII bus> [tentative] on fxp0
inphy0.miibus0.fxp0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
inphy0: <i82555 10/100 media interface> [tentative] on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
inphy0: <i82555 10/100 media interface> [attached!] on miibus0
miibus0: <MII bus> [attached!] on fxp0
fxp0: bpf attached
fxp0: MAC address: 00:a0:c9:96:e7:99
fxp0: <Intel 82558 Pro/100 Ethernet> [attached!] port 0xd400-0xd41f mem 0xd4000000-0xd40fffff,0xd7000000-0xd7000fff irq 9 at device 11.0 on pci2
pci2: <PCI bus> [attached!] on pcib2
pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Intel ICH ATA66 controller> [tentative] port 0xb800-0xb80f at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xb800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0 [tentative]: at 0x1f0 irq 14 on atapci0
ad0: success setting UDMA4 on Intel chip
ar: FreeBSD check1 failed
ad0: <WDC WD400BB-23DEA0/05.03E05> ATA-5 disk at ata0-master
ad0: 38162MB (78156288 sectors), 77536 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata0 [attached!]: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xb808
ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1 [tentative]: at 0x170 irq 15 on atapci0
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <SONY DVD-ROM DDU1615/FYS3> DVD-ROM drive at ata1 as master
acd0: read 689KB/s (36026KB/s), 254KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1-slave: piomode=4 dmamode=2 udmamode=4 dmaflag=1
ata1-slave: success setting PIO4 on generic chip
acd1: <PIONEER DVD-RW DVR-111D/1.19> DVD-R drive at ata1 as slave
acd1: read 6890KB/s (36026KB/s) write 5511KB/s (6890KB/s), 2000KB buffer, PIO4
acd1: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd1: Writes: CD-R, CD-RW, DVD-R, test write, burnproof
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ata1 [attached!]: at 0x170 irq 15 on atapci0
atapci0: <Intel ICH ATA66 controller> [attached!] port 0xb800-0xb80f at device 31.1 on pci0
uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhci0: <Intel 82801AA (ICH) USB controller> [tentative] port 0xb400-0xb41f irq 9 at device 31.2 on pci0
(probe0:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe0:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
(probe0:ata1:0:0:0): Invalid field in CDB
(probe1:ata1:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe1:ata1:0:1:0): ILLEGAL REQUEST asc:24,0
(probe1:ata1:0:1:0): Invalid field in CDB sks:c8,1
usb2.uhci0.pci0.pcib0.legacypci0.nexus0.root0
usb2: <Intel 82801AA (ICH) USB controller> [tentative] on uhci0
usb2: USB revision 1.0
uhub4: 2 ports with 2 removable, self powered
usb2: <Intel 82801AA (ICH) USB controller> [attached!] on uhci0
uhci0: <Intel 82801AA (ICH) USB controller> [attached!] port 0xb400-0xb41f irq 9 at device 31.2 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
orm0: <Option ROM> [tentative] at iomem 0xc0000-0xcafff on isa0
orm0: <Option ROM> [attached!] at iomem 0xc0000-0xcafff on isa0
pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc0: cannot reserve I/O port range
fdc0 [tentative] failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ata2 [tentative] failed to probe at port 0x1f0 irq 14 on isa0
ata3 [tentative] failed to probe at port 0x170 irq 15 on isa0
atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0047
psm0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sio1 [tentative] at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1 [attached!] at port 0x2f8-0x2ff irq 3 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
ppc0: <Parallel port> [tentative] at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0.ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
ppbus0: <Parallel port bus> [tentative] on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 2100 Series> PJL,MLC,PCL,PCLXL,POSTSCRIPT
plip0.ppbus0.ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
plip0: <PLIP network interface> [tentative] on ppbus0
lp0: bpf attached
plip0: <PLIP network interface> [attached!] on ppbus0
lpt0.ppbus0.ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
lpt0: <Printer> [tentative] on ppbus0
lpt0: Interrupt-driven port
lpt0: <Printer> [attached!] on ppbus0
ppi0.ppbus0.ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
ppi0: <Parallel I/O> [tentative] on ppbus0
ppi0: <Parallel I/O> [attached!] on ppbus0
ppbus0: <Parallel port bus> [attached!] on ppc0
ppc0: <Parallel port> [attached!] at port 0x378-0x37f irq 7 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
lo0: bpf attached
faith0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): NOT READY asc:3a,0
(probe0:ata1:0:0:0): Medium not present
(probe1:ata1:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe1:ata1:0:1:0): NOT READY asc:3a,0
(probe1:ata1:0:1:0): Medium not present
(probe0:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe0:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
(probe0:ata1:0:0:0): Invalid field in CDB
(probe1:ata1:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe1:ata1:0:1:0): ILLEGAL REQUEST asc:24,0
(probe1:ata1:0:1:0): Invalid field in CDB sks:c8,1
bootdev: a0300000 type=0 unit=0 slice=3 part=0 major=3
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x6, start 63, end = 4192964, size 4192902 : OK
ad0s2: type 0xa5, start 4192965, end = 16466687, size 12273723 : OK
ad0s3: type 0xf, start 16482690, end = 78156224, size 61673535
ad0s3: C/H/S end 1023/254/63 (16515008) != end 78156224: invalid
ad0s5: type 0x7, start 16482753, end = 78156224, size 61673472
ad0s5: C/H/S start 1023/254/63 (16515008) != start 16482753: invalid
ad0s5: C/H/S end 1023/254/63 (16515008) != end 78156224: invalid
start_init: trying /sbin/init




[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]