DragonFly BSD
DragonFly users List (threaded) for 2011-04
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: Tests of RAID adapters

To: Francois Tigeot <ftigeot@xxxxxxxxxxxx>
From: Sascha Wildner <saw@xxxxxxxxx>
Date: Mon, 25 Apr 2011 19:38:57 +0200

On 4/25/2011 9:12, Francois Tigeot wrote:


The RAID1 volume created in the BIOS of the card was visible but there were
some timeout error messages from the start:

dmesg extract:
   mpt0:<LSI Logic SAS/SATA Adapter>
   mpt0: MPI Version =
   mpt0: Capabilities: (RAID-0 RAID-1E RAID-1)
   mpt0: 1 Active Volume (2 Max)
   mpt0: 2 Hidden Drive Members (14 Max)
   mpt0: mpt_wait_req(4) timed out
   mpt0: read_cfg_header timed out
   mpt0: vol0(mpt0:0:0) mpt_refresh_raid_vol: Failed to read RAID vol Hdr(0)
   mpt0: vol0(mpt0:0:0): Settings()
   mpt0: vol0(mpt0:0:0): 0 Members:
   mpt0: vol0(mpt0:0:0): RAID0-Optimal
   (mpt0:0:1): Physical(mpt0:0:1:0),Pass-thru (mpt0:1:0:0)
   (mpt0:0:1): Online
   (mpt0:0:2): Physical(mpt0:0:2:0),Pass-thru (mpt0:1:1:0)
   (mpt0:0:2): Online
   da0 at mpt0 bus 0 target 0 lun 0
   da0:<LSILOGIC Logical Volume 3000>  Fixed DirectAccess SCSI-2 device
   da0: 300.000MB/s transfers
   da0: 151634MB (310546432 512 byte sectors: 255H 63S/T 19330C)

I couldn't install DragonFly, newfs_hammer hung at 90% completion. The disks
were making strange noises, as if they were constantly seeking

I've put an update for mpt(4) here:


Please test it when you get the chance.


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]