DragonFly BSD
DragonFly users List (threaded) for 2011-06
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: SATA drive problem

From: Francois Tigeot <ftigeot@xxxxxxxxxxxx>
Date: Wed, 29 Jun 2011 21:48:05 +0200

On Wed, Jun 29, 2011 at 10:22:24AM -0700, Tim Darby wrote:
> I tried to move a big folder from one SATA drive to another and the machine
> stopped responding to the point that it lost network connectivity (DF
> 2.10.1).  After reboot, I found the following errors:
> kernel: (da4:ahci0:4:0:0): READ(10). CDB: 28 0 80 3a d6 48 0 0 80 0
> kernel: (da4:ahci0:4:0:0): CAM Status: SCSI Status Error
> kernel: (da4:ahci0:4:0:0): SCSI Status: Check Condition
> kernel: (da4:ahci0:4:0:0): MEDIUM ERROR asc:0,0
> I'm guessing this is a drive problem, not a system problem, but just wanted
> to check with the experts first.  I haven't had a chance to run a drive
> diagnostic yet.  I did try a repeat of that same mv command and it happened
> again.  The drive is just a month old, FWIW.

I'll say some specific parts of the magnetic platters of your drive are
damaged and that's why you get this error every time trying to access the same

A drive has not to be old to fail; failure during the first weeks of activity
is relatively common.
It may have been badly packaged or handled during transport or may have been
badly manufactured ...

Francois Tigeot

[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]