Copyright (c) 2003-2015 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v4.3.1.523.ge1887-DEVELOPMENT #1: Tue Sep 22 13:03:50 CEST 2015
    marino@ironwolf.synsport.com:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC invariant clock: 3292495716 Hz, i8254 clock: 1193172 Hz
CPU: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (3292.55-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x17bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX>
  AMD Features=0x28000800<SYSCALL,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Thermal and PM Features=0x77<SENSOR,TURBO,ARAT,PLN,ECMD,PTM>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory  = 8570722304 (8173 MB)
avail memory = 8039665664 (7667 MB)
lapic: divisor index 0, frequency 49886897 Hz
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 102892132, shift 5
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of vn0 to noop
disk scheduler: set policy of vn1 to noop
disk scheduler: set policy of vn2 to noop
disk scheduler: set policy of vn3 to noop
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CF5D8068 000054 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000CF5DF0C8 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000CF5D8150 006F76 (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x00000000CF60FF80 000040
ACPI: APIC 0x00000000CF5DF1C0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000CF5DF238 000102 (v01 AMICPU PROC     00000001 MSFT 03000001)
ACPI: MCFG 0x00000000CF5DF340 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: AAFT 0x00000000CF5DF380 00006F (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: HPET 0x00000000CF5DF3F0 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <ALASKA A M I> on motherboard
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
ACPI: Executed 1 blocks of module-level executable AML code
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xd8000000-0xdbffffff,0xd0000000-0xd7ffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
pci1: <multimedia, HDA> (vendor 0x10de, dev 0x0bee) at device 0.1 irq 17
pci0: <simple comms> (vendor 0x8086, dev 0x1c3a) at device 22.0 irq 16
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfa307000-0xfa3073ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x1c20) at device 27.0 irq 22
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci3: <ACPI PCI bus> on pcib3
alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0xd000-0xd07f mem 0xfa200000-0xfa23ffff irq 18 at device 0.0 on pci3
alc0: 11776 Tx FIFO, 12032 Rx FIFO
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy1: <Atheros F1 10/100/1000 PHY> on miibus0
atphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy2: <Atheros F1 10/100/1000 PHY> on miibus0
atphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy3: <Atheros F1 10/100/1000 PHY> on miibus0
atphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy4: <Atheros F1 10/100/1000 PHY> on miibus0
atphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy5: <Atheros F1 10/100/1000 PHY> on miibus0
atphy5:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy6: <Atheros F1 10/100/1000 PHY> on miibus0
atphy6:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy7: <Atheros F1 10/100/1000 PHY> on miibus0
atphy7:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy8: <Atheros F1 10/100/1000 PHY> on miibus0
atphy8:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy9: <Atheros F1 10/100/1000 PHY> on miibus0
atphy9:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy10: <Atheros F1 10/100/1000 PHY> on miibus0
atphy10:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy11: <Atheros F1 10/100/1000 PHY> on miibus0
atphy11:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy12: <Atheros F1 10/100/1000 PHY> on miibus0
atphy12:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy13: <Atheros F1 10/100/1000 PHY> on miibus0
atphy13:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy14: <Atheros F1 10/100/1000 PHY> on miibus0
atphy14:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy15: <Atheros F1 10/100/1000 PHY> on miibus0
atphy15:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy16: <Atheros F1 10/100/1000 PHY> on miibus0
atphy16:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy17: <Atheros F1 10/100/1000 PHY> on miibus0
atphy17:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy18: <Atheros F1 10/100/1000 PHY> on miibus0
atphy18:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy19: <Atheros F1 10/100/1000 PHY> on miibus0
atphy19:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy20: <Atheros F1 10/100/1000 PHY> on miibus0
atphy20:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy21: <Atheros F1 10/100/1000 PHY> on miibus0
atphy21:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy22: <Atheros F1 10/100/1000 PHY> on miibus0
atphy22:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy23: <Atheros F1 10/100/1000 PHY> on miibus0
atphy23:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy24: <Atheros F1 10/100/1000 PHY> on miibus0
atphy24:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy25: <Atheros F1 10/100/1000 PHY> on miibus0
atphy25:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy26: <Atheros F1 10/100/1000 PHY> on miibus0
atphy26:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy27: <Atheros F1 10/100/1000 PHY> on miibus0
atphy27:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy28: <Atheros F1 10/100/1000 PHY> on miibus0
atphy28:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy29: <Atheros F1 10/100/1000 PHY> on miibus0
atphy29:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy30: <Atheros F1 10/100/1000 PHY> on miibus0
atphy30:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy31: <Atheros F1 10/100/1000 PHY> on miibus0
atphy31:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
usbus0: 480Mbps High Speed USB v2.0
alc0: MAC address: 00:25:22:c9:fb:83
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfa100000-0xfa107fff irq 19 at device 0.0 on pci4
xhci0: 64 bytes context size, 64-bit DMA
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
usbus1 on xhci0
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfa306000-0xfa3063ff irq 23 at device 29.0 on pci0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: EHCI version 1.0
ugen1.1: <0x1b6f> at usbus1
uhub1: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057,0xf060-0xf063,0xf070-0xf077 mem 0xfa305000-0xfa3057ff irq 19 at device 31.2 on pci0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 4 ports with 4 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ahci0: AHCI 1.3 cap 0xe730ff45<S64A,NCQ,SSNTF,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<BOH>, 6 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.0: Caps 40006<HPCP,POD,SUD>
ahci0.1: Caps 40006<HPCP,POD,SUD>
ahci0.2: Caps 40006<HPCP,POD,SUD>
ahci0.3: Caps 40006<HPCP,POD,SUD>
ahci0.4: Caps 40006<HPCP,POD,SUD>
ahci0.5: Caps 40006<HPCP,POD,SUD>
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <vendor 0x05e3> at usbus2
uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 3> on usbus2
uhub5: 4 ports with 3 removable, self powered
ugen2.4: <No brand> at usbus2
ukbd0: <No brand Combo Free KVM, class 0/0, rev 1.10/0.00, addr 4> on usbus2
kbd2 at ukbd0
ums0: <No brand Combo Free KVM, class 0/0, rev 1.10/0.00, addr 4> on usbus2
ums0: 5 buttons and [XYZ] coordinates ID=1
ahci0.0: Found SSD "M4-CT128M4SSD2 070H" serial="00000000115209009BED"
ahci0.0: tags=32/32 satacap=150e satacap2=0006 satafea=004c NCQ=YES capacity=122104.33MB
ahci0.0: f85=7469 f86=bc09 f87=6163 WC=enabled RA=enabled SEC=frozen
ahci0.1: Found SSD "M4-CT064M4SSD2 070H" serial="0000000012060904EEDF"
ahci0.1: tags=32/32 satacap=150e satacap2=0006 satafea=004c NCQ=YES capacity=61057.33MB
ahci0.1: f85=7469 f86=bc09 f87=6163 WC=enabled RA=enabled SEC=frozen
ahci0.2: Found DISK "WDC WD10EARX-00N0YB0 51.0AB51" serial="WD-WCC0T0718772"
ahci0.2: tags=32/32 satacap=170e satacap2=0004 satafea=0044 NCQ=YES capacity=953869.71MB
ahci0.2: f85=7469 f86=bc41 f87=4123 WC=enabled RA=enabled SEC=frozen
ahci0.3: Found ATAPI "TSSTcorp CDDVDW SH-S203D SB00" serial=""
ahci0.3: tags=0/32 satacap=0602 satacap2=0000 satafea=0068 NCQ=NO capacity=1.00MB
ahci0.3: f85=0000 f86=0000 f87=0000 WC=notsupp RA=notsupp SEC=notsupp
ahci0.4: No device detected
ahci0.5: No device detected
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x1c22) at device 31.3 irq 18
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE1013A0FC0 00038C (v01 AMI    IST      00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE01B729690 000084 (v01 AMI    CST      00000001 MSFT 03000001)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
ACPI: Enabled 3 GPEs in block 00 to 3F
orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
wbsio0: <Winbond LPC Super I/O NCT6776F rev 0x33> at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0x290
device_probe_and_attach: wbsio0 attach returned 6
sio2: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 6 busses
CAM: finished configuring all busses
disk scheduler: set policy of cd0 to noop
disk scheduler: set policy of da0 to noop
disk scheduler: set policy of da1 to noop
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA M4-CT128M4SSD2 070H> Fixed Direct Access SCSI-4 device 
da0: Serial Number 00000000115209009BED
da0: 600.000MB/s transfers
da0: 122104MB (250069680 512 byte sectors: 255H 63S/T 15566C)
da0: supports TRIM
cd0 at ahci0 bus 3 target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-S203D SB00> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da1 at ahci0 bus 1 target 0 lun 0
da1: <SATA M4-CT064M4SSD2 070H> Fixed Direct Access SCSI-4 device 
da1: Serial Number 0000000012060904EEDF
da1: 600.000MB/s transfers
da1: 61057MB (125045424 512 byte sectors: 255H 63S/T 7783C)
da1: supports TRIM
disk scheduler: set policy of da2 to noop
da2 at ahci0 bus 2 target 0 lun 0
da2: <SATA WDC WD10EARX-00N 51.0> Fixed Direct Access SCSI-4 device 
da2: Serial Number WD-WCC0T0718772
da2: 300.000MB/s transfers
da2: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
ugen2.5: <PIXART> at usbus2
ums1: <PIXART USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 5> on usbus2
ums1: 3 buttons and [XYZ] coordinates ID=0
no B_DEVMAGIC (bootdev=0)
Mounting root from ufs:/dev/serno/00000000115209009BED.s2a
DMA space used: 10788k, remaining available: 131072k
Mounting devfs
swap low/high-water marks set to 587201/880801
Warning: vfsync skipped 2 dirty bufs in pass2!
Warning: vfsync skipped 2 dirty bufs in pass2!