DragonFly bugs List (threaded) for 2009-02
DragonFly BSD
DragonFly bugs List (threaded) for 2009-02
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

[issue1270] System hangs after /sbin/init on SMP+APIC enabled kernel


From: "Michael Kosarev \(via DragonFly issue tracker\)" <sinknull@xxxxxxxxxxxxxxxxxxxxxxx>
Date: Fri, 06 Feb 2009 03:53:20 +0000

New submission from Michael Kosarev <russiane39@gmail.com>:

System will hang if I compile kernel with SMP+APIC options in kernel config.
System hw specs:
Intel S3210SHLX motherboard
Intel Core2 Quad Q6600 CPU
In attached file you could see output from serial console. Unfortunately but I'm
unable to get a coredump from system.

----------
files: s3210shlx.txt
keyword: acpi
messages: 6108
nosy: RussianE39
priority: urgent
status: unread
title: System hangs after /sbin/init on SMP+APIC enabled kernel

_____________________________________________________
DragonFly issue tracker <bugs@lists.dragonflybsd.org>
<http://bugs.dragonflybsd.org/issue1270>
_____________________________________________________
DragonFly boot
0:ad(0,a): boot -v /boot/kernelWARNING: loader(8) metadata is missing!
SMAP type=01 base=00000000 00000000 len=00000000 0009ec00
SMAP type=02 base=00000000 0009ec00 len=00000000 00001400
SMAP type=02 base=00000000 000a0000 len=00000000 00060000
SMAP type=01 base=00000000 00100000 len=00000000 3fbf0000
SMAP type=04 base=00000000 3fcf0000 len=00000000 000a6000
SMAP type=01 base=00000000 3fd96000 len=00000000 00079000
SMAP type=02 base=00000000 3fe0f000 len=00000000 00050000
SMAP type=01 base=00000000 3fe5f000 len=00000000 00009000
SMAP type=04 base=00000000 3fe68000 len=00000000 00077000
SMAP type=01 base=00000000 3fedf000 len=00000000 0000b000
SMAP type=03 base=00000000 3feea000 len=00000000 00015000
SMAP type=01 base=00000000 3feff000 len=00000000 00001000
SMAP type=02 base=00000000 3ff00000 len=00000000 00100000
SMAP type=02 base=00000000 f0000000 len=00000000 04000000
SMAP type=02 base=00000000 fff80000 len=00000000 0000c000
Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 2.3.0-DEVELOPMENT #0: Fri Feb  6 05:19:34 MSK 2009
    russiane39@border.gpinternet.ru:/usr/obj/usr/src/sys/V12
Calibrating clock(s) ... TSC clock: 2393987913 Hz, i8254 clock: 1193176 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (2394.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  Hyperthreading: 4 logical CPUs
real memory  = 1071706112 (1046588K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x0048f000 - 0x3fceffff, 1065750528 bytes (260193 pages)
0x3fd96000 - 0x3fdfefff, 430080 bytes (105 pages)
avail memory = 1030586368 (1006432K bytes)
Changing APIC ID for IO APIC #0 from 0 to 5 on chip
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 1 -> irq 1
IOAPIC #0 intpin 2 -> irq 2
IOAPIC #0 intpin 3 -> irq 3
IOAPIC #0 intpin 4 -> irq 4
IOAPIC #0 intpin 5 -> irq 5
IOAPIC #0 intpin 6 -> irq 6
IOAPIC #0 intpin 7 -> irq 7
IOAPIC #0 intpin 8 -> irq 8
IOAPIC #0 intpin 12 -> irq 12
IOAPIC #0 intpin 13 -> irq 13
IOAPIC #0 intpin 14 -> irq 14
IOAPIC #0 intpin 15 -> irq 15
Programming 24 pins in IOAPIC #1
SMP: CPU0 apic_initialize():
     lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
DragonFly/MP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 cpu2 (AP):  apic id:  2, version: 0x00050014, at 0xfee00000
 cpu3 (AP):  apic id:  3, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  5, version: 0x00170020, at 0xfec00000
 io1 (APIC): apic id:  6, version: 0x00178020, at 0xfec10000
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Finish MP startup
SMP: AP CPU #3 Launched!
SMP: CPU3 apic_initialize():
     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #2 Launched!
SMP: CPU2 apic_initialize():
     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
Active CPU Mask: 0000000f
pnpbios: Found PnP BIOS data at 0xc00f0a30
pnpbios: Entry = f0000:c4dc  Rev = 1.0
Other BIOS signatures found:
objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->64
start dummy scheduler helpers on cpus: 0 1 2 3
start scheduler helpers on cpus: 0 1 2 3
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=29f08086)
pcibios: No call entry point
pcibios: No call entry point
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
found-> vendor=0x8086, dev=0x29f0, revid=0x00
        bus=0, slot=0, func=0
        class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
IOAPIC #0 intpin 20 -> irq 9
Freeing (NOT implemented) redirected PCI irq 11.
Freeing (NOT implemented) redirected PCI irq 11.
        map[10]: type 1, range 32, base 41a00000, size 17
        map[14]: type 1, range 32, base 41a20000, size 12
        map[18]: type 1, range 32, base 00002040, size  5
found-> vendor=0x8086, dev=0x10bd, revid=0x02
        bus=0, slot=25, func=0
        class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=9
found-> vendor=0x8086, dev=0x2940, revid=0x02
        bus=0, slot=28, func=0
        class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
        subordinatebus=2        secondarybus=1
        intpin=a, irq=11
        PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00080ce0[HOTPLUG]
found-> vendor=0x8086, dev=0x2948, revid=0x02
        bus=0, slot=28, func=4
        class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
        subordinatebus=3        secondarybus=3
        intpin=a, irq=11
        PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00280560[HOTPLUG]
found-> vendor=0x8086, dev=0x244e, revid=0x92
        bus=0, slot=30, func=0
        class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0
        subordinatebus=4        secondarybus=4
found-> vendor=0x8086, dev=0x2916, revid=0x02
        bus=0, slot=31, func=0
        class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
IOAPIC #0 intpin 21 -> irq 10
        map[10]: type 3, range 32, base 00002068, size  3
        map[14]: type 1, range 32, base 00002074, size  2
        map[18]: type 1, range 32, base 00002060, size  3
        map[1c]: type 1, range 32, base 00002070, size  2
        map[20]: type 1, range 32, base 00002020, size  5
        map[24]: type 1, range 32, base 41a21000, size 11
found-> vendor=0x8086, dev=0x2922, revid=0x02
        bus=0, slot=31, func=2
        class=[STORAGE]01-06-01, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=10
IOAPIC #0 intpin 18 -> irq 11
Freeing (NOT implemented) redirected PCI irq 9.
Freeing (NOT implemented) redirected PCI irq 9.
        map[10]: type 1, range 64, base 41a21800, size  8
        map[20]: type 1, range 32, base 00002000, size  5
found-> vendor=0x8086, dev=0x2930, revid=0x02
        bus=0, slot=31, func=3
        class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=11
em0.pci0.pcib0.legacypci0.nexus0.root0
em0: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [tentative] port 0x2040-0x205f mem 0x41a20000-0x41a20fff,0x41a00000-0x41a1ffff irq 9 at device 25.0 on pci0
em0: bpf attached
em0: MAC address: 00:15:17:26:c1:32
em0: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [attached!] port 0x2040-0x205f mem 0x41a20000-0x41a20fff,0x41a00000-0x41a1ffff irq 9 at device 25.0 on pci0
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=8086 device=2940)> [tentative] irq 11 at device 28.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   2
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xfff00000-0xfffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
found-> vendor=0x8086, dev=0x032c, revid=0x09
        bus=1, slot=0, func=0
        class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
        subordinatebus=2        secondarybus=2
        PCI Express ver.1 cap=0x0071[PCIE2PCI]
pcib2.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=8086 device=032c)> [tentative] at device 0.0 on pci1
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xfff00000-0xfffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci2.pcib2.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib2
pci2: pci_attach() physical bus=2
pci2: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=8086 device=032c)> [attached!] at device 0.0 on pci1
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=8086 device=2940)> [attached!] irq 11 at device 28.0 on pci0
pcib3.pci0.pcib0.legacypci0.nexus0.root0
pcib3: <PCI to PCI bridge (vendor=8086 device=2948)> [tentative] irq 11 at device 28.4 on pci0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0x41000000-0x418fffff
pcib3:   prefetched decode 0x40000000-0x40ffffff
pci3.pcib3.pci0.pcib0.legacypci0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib3
pci3: pci_attach() physical bus=3
IOAPIC #0 intpin 16 -> irq 16
Freeing (NOT implemented) redirected PCI irq 11.
Freeing (NOT implemented) redirected PCI irq 11.
        map[10]: type 1, range 32, base 40000000, size 24
        map[14]: type 1, range 32, base 41800000, size 14
        map[18]: type 1, range 32, base 41000000, size 23
found-> vendor=0x102b, dev=0x0522, revid=0x02
        bus=3, slot=0, func=0
        class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=16
        PCI Express ver.1 cap=0x0011[LEGDEV]
pci3: <Matrox model 0522 graphics accelerator> (vendor=0x102b, dev=0x0522) at 0.0 irq 16
pci3: <PCI bus> [attached!] on pcib3
pcib3: <PCI to PCI bridge (vendor=8086 device=2948)> [attached!] irq 11 at device 28.4 on pci0
pcib4.pci0.pcib0.legacypci0.nexus0.root0
pcib4: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> [tentative] at device 30.0 on pci0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x1000-0x1fff
pcib4:   memory decode     0x41900000-0x419fffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pcib4:   Subtractively decoded bridge.
pci4.pcib4.pci0.pcib0.legacypci0.nexus0.root0
pci4: <PCI bus> [tentative] on pcib4
pci4: pci_attach() physical bus=4
Freeing (NOT implemented) redirected PCI irq 9.
Freeing (NOT implemented) redirected PCI irq 9.
        map[10]: type 1, range 32, base 41920000, size 17
        map[14]: type 1, range 32, base 41900000, size 17
        map[18]: type 1, range 32, base 00001000, size  6
found-> vendor=0x8086, dev=0x1076, revid=0x05
        bus=4, slot=2, func=0
        class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
em1.pci4.pcib4.pci0.pcib0.legacypci0.nexus0.root0
em1: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [tentative] port 0x1000-0x103f mem 0x41900000-0x4191ffff,0x41920000-0x4193ffff irq 11 at device 2.0 on pci4
pcib4: device em1 requested decoded memory range 0x41920000-0x4193ffff
pcib4: device em1 requested decoded I/O range 0x1000-0x103f
em1: bpf attached
em1: MAC address: 00:15:17:26:c1:30
em1: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [attached!] port 0x1000-0x103f mem 0x41900000-0x4191ffff,0x41920000-0x4193ffff irq 11 at device 2.0 on pci4
pci4: <PCI bus> [attached!] on pcib4
pcib4: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=8086 device=2916)> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=8086 device=2916)> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Intel (ID=29228086) AHCI controller> [tentative] port 0x2020-0x203f,0x2070-0x2073,0x2060-0x2067,0x2074-0x2077,0x2068-0x206f mem 0x41a21000-0x41a217ff irq 10 at device 31.2 on pci0
atapci0: AHCI Version 01.20 controller with 6 ports detected
ata2.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci0
ata2: SATA connect time=0ms
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ad4: 76319MB <SAMSUNG HD082GJ JE100-19> at ata2-master SATA300
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
ata2: <ATA channel 0> [attached!] on atapci0
ata3.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci0
ata3: SATA connect time=0ms
ata3: ahci_reset devices=0x1<ATA_MASTER>
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: Intel check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ad6: 953869MB <SAMSUNG HD103UJ 1AA01113> at ata3-master SATA300
ad6: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ata3: <ATA channel 1> [attached!] on atapci0
ata4.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata4: <ATA channel 2> [tentative] on atapci0
ata4: SATA connect status=00000000
ata4: ahci_reset devices=0x0
ata4: <ATA channel 2> [attached!] on atapci0
ata5.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata5: <ATA channel 3> [tentative] on atapci0
ata5: SATA connect status=00000000
ata5: ahci_reset devices=0x0
ata5: <ATA channel 3> [attached!] on atapci0
ata6.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata6: <ATA channel 4> [tentative] on atapci0
ata6: SATA connect status=00000000
ata6: ahci_reset devices=0x0
ata6: <ATA channel 4> [attached!] on atapci0
ata7.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata7: <ATA channel 5> [tentative] on atapci0
ata7: SATA connect status=00000000
ata7: ahci_reset devices=0x0
ata7: <ATA channel 5> [attached!] on atapci0
atapci0: <Intel (ID=29228086) AHCI controller> [attached!] port 0x2020-0x203f,0x2070-0x2073,0x2060-0x2067,0x2074-0x2077,0x2068-0x206f mem 0x41a21000-0x41a217ff irq 10 at device 31.2 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2930) at 31.3 irq 11
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
orm0: <Option ROMs> [tentative] at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0
orm0: <Option ROMs> [attached!] at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0
atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 02 ef 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio0: irq maps: 0x400 0x410 0x400 0x400
sio0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
SMP: enabled INTs: 0, 1, 4, 9, 11, apic_imen: 0x00fff5ec
BIOS Geometries:
 0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
 1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
 2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
 3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
 4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
 5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
 6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
 7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
 0 accounted for
Device configuration finished.
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
faith0: bpf attached
lo0: bpf attached
bootdev: a020001e type=30 unit=0 slice=2 part=0 major=-1
ATA PseudoRAID loaded

Manual root filesystem specification:
  <fstype>:<device>  Specify root (e.g. ufs:da0s1a)
  ?                  List valid disk boot devices
  panic              Just panic
  abort              Abort manual input

mountroot> ufs:ad4s1a
Mounting root from ufs:ad4s1a
ad4s1: type 0xa5, start 63, end = 156301487, size 156301425 : OK
start_init: trying /sbin/init
Loading configuration files.
. 
kern.seedenable: 0 -> 1
kern.seedenable: 1 -> 0
dumpon: crash dumps to /dev/ad4s1b (116, 0x20021)
swapon: adding /dev/ad4s1b as swap device
Starting file system checks:
/dev/ad4s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1a: clean, 4033474 free (762 frags, 504089 blocks, 0.0% fragmentation)
/dev/ad4s1d: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1d: clean, 8253911 free (159 frags, 1031719 blocks, 0.0% fragmentation)
/dev/ad4s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1e: clean, 8256818 free (106 frags, 1032089 blocks, 0.0% fragmentation)
/dev/ad4s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1f: clean, 4328306 free (30866 frags, 537180 blocks, 0.4% fragmentation)
/dev/ad4s1g: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1g: clean, 7381845 free (1261 frags, 922573 blocks, 0.0% fragmentation)
Setting hostname: border.gpinternet.ru.
kern.sync_on_panic: 1 -> 0
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
Debugger("manual escape to debugger")

CPU0 stopping CPUs: 0x0000000e
 stopped
Stopped at      Debugger+0x34:  movb    $0,db_active+0x4
db> trace
Debugger(c0395dd2) at Debugger+0x34
sc_attach_unit(0,0,0,c04577e0,ff800000) at sc_attach_unit+0xa73
sc_attach_unit(c04577e0,0,d2c58cc0) at sc_attach_unit+0xd5c
atkbd_attach_unit(c04577e0,0) at atkbd_attach_unit+0x612
pci_cfgintr(c04577e0,0) at pci_cfgintr+0x159d
ithread_fast_handler(1,0,0,0,0) at ithread_fast_handler+0x33c
lwkt_exit() at lwkt_exit
db> show map
Task map 0xc03374a0: pmap=0xf0458b00, nentries=-1223704572, version=1354778066


Fatal trap 12: page fault while in kernel mode
mp_lock = 00000000; cpuid = 0; lapic.id = 00000000
fault virtual address   = 0x8300c061
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc02d669c
stack pointer           = 0x10:0xd2c04b0c
frame pointer           = 0x10:0xd2c04b18
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = resume, IOPL = 0
current process         = Idle
current thread          = pri 60 (CRIT)
 <- SMP: XXX
kernel: type 12 trap, code=0
Stopped at      Debugger+0x34:  movb    $0,db_active+0x4
db> show page
vmstats.v_free_count: 244075
vmstats.v_cache_count: 0
vmstats.v_inactive_count: 1189
vmstats.v_active_count: 276
vmstats.v_wire_count: 9779
vmstats.v_free_reserved: 446
vmstats.v_free_min: 1721
vmstats.v_free_target: 7330
vmstats.v_cache_min: 7330
vmstats.v_inactive_target: 10995
db> n

CPU0 restarting CPUs: 0x0000000e
 restarted


Fatal trap 10: trace trap while in kernel mode
mp_lock = 00000000; cpuid = 0; lapic.id = 00000000
instruction pointer     = 0x8:0xc03374a7
stack pointer           = 0x10:0xd2c04c94
frame pointer           = 0x10:0xd2c04c9c
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = trace trap, interrupt enabled, IOPL = 0
current process         = Idle
current thread          = pri 60 (CRIT)
 <- SMP: XXX

CPU0 stopping CPUs: 0x0000000e
 stopped

CPU0 restarting CPUs: 0x0000000e
 restarted


Fatal trap 10: trace trap while in kernel mode
mp_lock = 00000000; cpuid = 0; lapic.id = 00000000
instruction pointer     = 0x8:0xc03374aa
stack pointer           = 0x10:0xd2c04c9c
frame pointer           = 0x10:0xd2c04c9c
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = trace trap, interrupt enabled, IOPL = 0
current process         = Idle
current thread          = pri 60 (CRIT)
 <- SMP: XXX

CPU0 stopping CPUs: 0x0000000e
 stopped

CPU0 restarting CPUs: 0x0000000e
 restarted


Fatal trap 10: trace trap while in kernel mode
mp_lock = 00000000; cpuid = 0; lapic.id = 00000000
instruction pointer     = 0x8:0xc03374ab
stack pointer           = 0x10:0xd2c04ca0
frame pointer           = 0x10:0xd2c04cd8
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = trace trap, interrupt enabled, IOPL = 0
current process         = Idle
current thread          = pri 60 (CRIT)
 <- SMP: XXX

CPU0 stopping CPUs: 0x0000000e
 stopped
After 3 instructions (0 loads, 0 stores),
Stopped at      Debugger+0x3f:  ret
db> panic
panic: from debugger
mp_lock = 00000000; cpuid = 0
Trace beginning at frame 0xd2c04ad0
panic(d2c04af4,0,c0362f68,0,d2c04af4) at panic+0x14d
panic(c038361f,d2c04bb8,c014ff38,c03374a0,0) at panic+0x14d
db_set_breakpoints(c03374a0,0,ffffffff,d2c04b2c) at db_set_breakpoints+0x6a
db_command_loop(0,d2c04bdc,c03376aa,3,0) at db_command_loop+0x438
db_trap(3,0,1,1,d2c04c0c) at db_trap+0xa0
kdb_trap(3,0,d2c04c4c) at kdb_trap+0x13e
user_ldt_free(3c,c03f70c4,0,0,f4240) at user_ldt_free+0x58f
trap(d2c04c4c) at trap+0x55
alltraps_with_regs_pushed(c0395dd2) at alltraps_with_regs_pushed+0x1d
sc_attach_unit(18,10,0,c04577e0,ff800000) at sc_attach_unit+0xa73
sc_attach_unit(c04577e0,0,d2c58cc0) at sc_attach_unit+0xd5c
atkbd_attach_unit(c04577e0,0) at atkbd_attach_unit+0x612
pci_cfgintr(c04577e0,0) at pci_cfgintr+0x159d
ithread_fast_handler(1,0,0,0,0) at ithread_fast_handler+0x33c
lwkt_exit() at lwkt_exit
boot() called on cpu#0
Uptime: 1s

dumping to dev #ad/0x20021, blockno 2101128


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]