delld531
dmesg:
Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v2.4.1-RELEASE #7: Wed Sep 30 18:16:27 PDT 2009
root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src-misc/sys/AMD64_GENERIC
TSC clock: 1994973201 Hz, i8254 clock: 1193166 Hz
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1995.01-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
real memory = 2011914240 (1964760K bytes)
avail memory = 1879314432 (1835268K bytes)
kbd1 at kbdmux0
fildesc_drvinit() building stdin, stdout, stderr:
md0: Malloc disk
ACPI: RSDP 0xfbee0 00024 (v2 DELL )
ACPI: XSDT 0x77eb7e00 00064 (v1 DELL M08 27D80C10 ASL 00000061)
ACPI: FACP 0x77eb7c9c 000F4 (v4 DELL M08 27D80C10 ASL 00000061)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0 0/1 20090521 tbfadt-655
ACPI: DSDT 0x77eb8400 04E96 (v2 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 0x77ec6c00 00040
ACPI: HPET 0x77eb7f00 00038 (v1 DELL M08 00000001 ASL 00000061)
ACPI: APIC 0x77eb8000 00068 (v1 DELL M08 27D80C10 ASL 00000047)
ACPI: ASF! 0x77eb7c00 0006A (v32 DELL M08 27D80C10 ASL 00000061)
ACPI: MCFG 0x77eb7fc0 0003E (v16 DELL M08 27D80C10 ASL 00000061)
ACPI: TCPA 0x77eb8300 00032 (v1 00000000 ASL 00000000)
ACPI: SSDT 0x77ec7000 00206 (v1 DELL M08 200013E8 ASL 00000061)
ACPI: SLIC 0x77eb809c 00176 (v1 DELL M08 27D80C10 ASL 00000061)
acpi0: <DELL M08 > on motherboard
ACPI: SSDT 0x77ec6c80 00043 (v1 LMPWR DELLLOM 00001001 INTL 20050624)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
ACPI: domain0 misses processors, should be 2, got 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xfea00000-0xfeafffff,0xfe9f0000-0xfe9fffff,0xe0000000-0xefffffff irq 3 at device 5.0 on pci1
pcib2: <PCI-PCI bridge> at device 5.0 on pci0
pci11: <PCI bus> on pcib2
pci11: <network> (vendor 0x14e4, dev 0x4311) at device 0.0 irq 10
pcib3: <PCI-PCI bridge> at device 6.0 on pci0
pci9: <PCI bus> on pcib3
bge0: <Broadcom BCM5755M Gigabit Ethernet> mem 0xfe7f0000-0xfe7fffff irq 9 at device 0.0 on pci9
bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
alignment check failed
miibus0: <MII bus> on bge0
brgphy0: <BCM5755 10/100/1000baseT PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: MAC address: 00:1d:09:cd:9c:90
ahci0: <ATI-SB600-SATA> port 0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 18.0 on pci0
ahci0: AHCI 1.1 capabilities 0xf722ff83<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SPM,PMD,SSC,PSC,CCCS>, 4 ports, 32 tags/port, gen 1 (1.5Gbps) and 2 (3Gbps)
ahci0.0: Transient Errors: 400000<PRCS>
ahci0.0: Restart 00000002
ahci0.1: No device detected
ahci0.2: No device detected
ahci0.3: No device detected
ahci0.0.15: Poll timeout slot 1 CMD: 62016<HPCP,PMA,MPSS,FRE,POD,SUD> TFD: 0x150 SERR: c0000<DIAG.B,DIAG.W>
ahci0.0: PMPROBE First FIS failed
ahci0.0.15: Poll timeout slot 1 CMD: 6a117<HPCP,PMA,CR,MPSS,FRE,POD,SUD,ST> TFD: 0x1d0<BSY> SERR: 0
ahci0.0: PMPROBE Second FIS failed
ahci0.0: Found DISK "Hitachi HTS722012K9A300 DCCOCA1H" serial="080410DP1C30DJGHJBVP"
ahci0.0: tags=32/32 satacap=1706 satafea=005e NCQ=YES capacity=114473.46MB
ahci0.0: f85=7469 f86=be49 f87=4163 WC=enabled RA=enabled SEC=frozen
ohci0: <OHCI (generic) USB controller> mem 0xffb00000-0xffb00fff irq 11 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xffb01000-0xffb01fff irq 10 at device 19.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xffb02000-0xffb02fff irq 9 at device 19.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xffb03000-0xffb03fff irq 10 at device 19.3 on pci0
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xffb04000-0xffb04fff irq 9 at device 19.4 on pci0
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> (vendor 0x1002, dev 0x4386) at device 19.5 irq 5
pci0: <serial bus, SMBus> (vendor 0x1002, dev 0x4385) at device 20.0
atapci0: <ATI SB600 UDMA133 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
acd0: DVDR <TSSTcorp DVD+/-RW TS-L632H/D300> at ata0-master UDMA33
ata1: <ATA channel 1> on atapci0
pci0: <multimedia, HDA> (vendor 0x1002, dev 0x4383) at device 20.2 irq 11
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <PCI-PCI bridge> at device 20.4 on pci0
pci3: <PCI bus> on pcib4
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
fwohci0: vendor=1217, dev=f7
fwohci0: <1394 Open Host Controller Interface> mem 0xfe6fe800-0xfe6fefff,0xfe6ff000-0xfe6fffff irq 5 at device 1.4 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 37:4f:c0:00:26:29:d0:70
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 36:4f:c0:29:d0:70
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio2: can't drain, serial port might not exist, disabling
ppc0: cannot reserve I/O port range
ip: MPSAFE
arp: MPSAFE
CAM: Configuring 7 busses
CAM: finished configuring all busses (0 left)
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA Hitachi HTS72201 DCCO> Fixed Direct Access SCSI-4 device
da0: Serial Number 080410DP1C30DJGHJBVP
da0: 300.000MB/s transfers
da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
no B_DEVMAGIC (bootdev=0)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-L632H D300> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from hammer:serno/080410DP1C30DJGHJBVP.s1d
tryroot serno/080410DP1C30DJGHJBVP.s1d
Mounting devfs
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
rum0: <Ralink 802.11 bg WLAN, class 0/0, rev 2.00/0.01, addr 2> on uhub0
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:24:01:a6:1c:8e
rum0: MAC address: 00:24:01:a6:1c:8e
sched_ithd: stray interrupt 7 on cpu 0
dmesg verbose:
Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v2.4.1-RELEASE #7: Wed Sep 30 18:16:27 PDT 2009
root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src-misc/sys/AMD64_GENERIC
Calibrating clock(s) ... TSC clock: 1994954811 Hz, i8254 clock: 1193155 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1995.01-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 2011914240 (1964760K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00f31000 - 0x77ea5fff, 1995919360 bytes (487285 pages)
avail memory = 1879314432 (1835268K bytes)
Preloaded elf kernel "/kernel" at 0xffffffff80f08000.
Preloaded elf obj module "/modules/acpi.ko" at 0xffffffff80f08290.
crypto: <crypto core>
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
fildesc_drvinit() building stdin, stdout, stderr:
md0: Malloc disk
ACPI: RSDP 0xfbee0 00024 (v2 DELL )
ACPI: XSDT 0x77eb7e00 00064 (v1 DELL M08 27D80C10 ASL 00000061)
ACPI: FACP 0x77eb7c9c 000F4 (v4 DELL M08 27D80C10 ASL 00000061)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0 0/1 20090521 tbfadt-655
ACPI: DSDT 0x77eb8400 04E96 (v2 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 0x77ec6c00 00040
ACPI: HPET 0x77eb7f00 00038 (v1 DELL M08 00000001 ASL 00000061)
ACPI: APIC 0x77eb8000 00068 (v1 DELL M08 27D80C10 ASL 00000047)
ACPI: ASF! 0x77eb7c00 0006A (v32 DELL M08 27D80C10 ASL 00000061)
ACPI: MCFG 0x77eb7fc0 0003E (v16 DELL M08 27D80C10 ASL 00000061)
ACPI: TCPA 0x77eb8300 00032 (v1 00000000 ASL 00000000)
ACPI: SSDT 0x77ec7000 00206 (v1 DELL M08 200013E8 ASL 00000061)
ACPI: SLIC 0x77eb809c 00176 (v1 DELL M08 27D80C10 ASL 00000061)
acpi0.nexus0.root0
acpi0: <DELL M08 > [tentative] on motherboard
ACPI: SSDT 0x77ec6c80 00043 (v1 LMPWR DELLLOM 00001001 INTL 20050624)
Warning: ACPI is disabling APM's device. You can't run both
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <32-bit timer at 3.579545MHz> [tentative] port 0x1008-0x100b on acpi0
acpi_timer0: <32-bit timer at 3.579545MHz> [attached!] port 0x1008-0x100b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu_cst0.cpu0.acpi0.nexus0.root0
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
cpu_cst0: switching to generic Cx mode
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
cpu_pst0.cpu0.acpi0.nexus0.root0
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
cpu_pst0: create domain0
cpu_pst0: control reg 127 0
cpu_pst0: status reg 127 0
cpu_pst0: freq 2000, pwr 35000, xlat 100, blat 9, cv e8302c4c, sv 0000044c
cpu_pst0: freq 1800, pwr 30115, xlat 100, blat 9, cv e8302c8a, sv 0000048a
cpu_pst0: freq 1600, pwr 25566, xlat 100, blat 9, cv e8302cc8, sv 000004c8
cpu_pst0: freq 800, pwr 7079, xlat 100, blat 9, cv e8302f80, sv 00000780
cpu_pst0: _PPC 0
cpu_pst0: <ACPI CPU P-State> [attached!] on cpu0
cpu0: <ACPI CPU> [attached!] on acpi0
acpi_tz0.acpi0.nexus0.root0
acpi_tz0: <Thermal Zone> [tentative] on acpi0
acpi_tz0: <Thermal Zone> [attached!] on acpi0
acpi_lid0.acpi0.nexus0.root0
acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0
acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
acpi_button1.acpi0.nexus0.root0
acpi_button1: <Sleep Button> [tentative] on acpi0
acpi_button1: <Sleep Button> [attached!] on acpi0
acpi_acad0.acpi0.nexus0.root0
acpi_acad0: <AC Adapter> [tentative] on acpi0
acpi_acad0: <AC Adapter> [attached!] on acpi0
battery0.acpi0.nexus0.root0
battery0: <ACPI Control Method Battery> [tentative] on acpi0
battery0: <ACPI Control Method Battery> [attached!] on acpi0
battery1.acpi0.nexus0.root0
battery1: <ACPI Control Method Battery> [tentative] on acpi0
battery1: <ACPI Control Method Battery> [attached!] on acpi0
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x66,0x62,0x64,0x60 irq 1 on acpi0
atkbd0.atkbdc0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0065
ACPI: domain0 misses processors, should be 2, got 1
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
battery1: battery initialization failed, giving up
psm0.atkbdc0.acpi0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x66,0x62,0x64,0x60 irq 1 on acpi0
sio0: irq maps: 0 0x10 0 0
sio0.acpi0.nexus0.root0
sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <DELL M08 > [attached!] at irq 9 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x800000ec
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=79101002)
pcib0.legacy0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] pcibus 0 on motherboard
pci0.pcib0.legacy0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1002, dev=0x7910, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x6220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7912, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7915, revid=0x00
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00200c80
found-> vendor=0x1002, dev=0x7916, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00300c80
found-> vendor=0x1002, dev=0x4380, revid=0x00
domain=0, bus=0, slot=18, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x6eb0, size 3, enabled
map[14]: type I/O Port, range 32, base 0x6eb8, size 2, enabled
map[18]: type I/O Port, range 32, base 0x6ec0, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x6ec8, size 2, enabled
map[20]: type I/O Port, range 32, base 0x6ee0, size 4, enabled
map[24]: type Memory, range 32, base 0xfec01000, size 10, enabled
pci:0:18:0: resource reservation failed 0xfec01000 - 0xfec013ff
found-> vendor=0x1002, dev=0x4387, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xffb00000, size 12, enabled
found-> vendor=0x1002, dev=0x4388, revid=0x00
domain=0, bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[10]: type Memory, range 32, base 0xffb01000, size 12, enabled
found-> vendor=0x1002, dev=0x4389, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
map[10]: type Memory, range 32, base 0xffb02000, size 12, enabled
found-> vendor=0x1002, dev=0x438a, revid=0x00
domain=0, bus=0, slot=19, func=3
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[10]: type Memory, range 32, base 0xffb03000, size 12, enabled
found-> vendor=0x1002, dev=0x438b, revid=0x00
domain=0, bus=0, slot=19, func=4
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
map[10]: type Memory, range 32, base 0xffb04000, size 12, enabled
found-> vendor=0x1002, dev=0x4386, revid=0x00
domain=0, bus=0, slot=19, func=5
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xffa80000, size 8, enabled
found-> vendor=0x1002, dev=0x4385, revid=0x14
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0103, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x10c0, size 4, enabled
pci:0:20:0: resource reservation failed 0x10c0 - 0x10cf
found-> vendor=0x1002, dev=0x438c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0115, statreg=0x0220, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0xbfa0, size 4, enabled
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xfebfc000, size 14, enabled
found-> vendor=0x1002, dev=0x438d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1.pci0.pcib0.legacy0.nexus0.root0
pcib1: <PCI-PCI bridge> [tentative] at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfe900000-0xfeafffff
pcib1: prefetched decode 0xe0000000-0xefffffff
pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x791f, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
pcib1: requested memory range 0xe0000000-0xefffffff: good
map[18]: type Memory, range 64, base 0xfe9f0000, size 16, enabled
pcib1: requested memory range 0xfe9f0000-0xfe9fffff: good
map[20]: type I/O Port, range 32, base 0xee00, size 8, enabled
pcib1: requested I/O range 0xee00-0xeeff: in range
map[24]: type Memory, range 32, base 0xfea00000, size 20, enabled
pcib1: requested memory range 0xfea00000-0xfeafffff: good
vgapci0.pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
vgapci0: <VGA-compatible display> [tentative] port 0xee00-0xeeff mem 0xfea00000-0xfeafffff,0xfe9f0000-0xfe9fffff,0xe0000000-0xefffffff irq 3 at device 5.0 on pci1
vgapci0: <VGA-compatible display> [attached!] port 0xee00-0xeeff mem 0xfea00000-0xfeafffff,0xfe9f0000-0xfe9fffff,0xe0000000-0xefffffff irq 3 at device 5.0 on pci1
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI-PCI bridge> [attached!] at device 1.0 on pci0
pcib2.pci0.pcib0.legacy0.nexus0.root0
pcib2: <PCI-PCI bridge> [tentative] at device 5.0 on pci0
pcib2: domain 0
pcib2: secondary bus 11
pcib2: subordinate bus 11
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfe800000-0xfe8fffff
pcib2: no prefetched decode
pci11.pcib2.pci0.pcib0.legacy0.nexus0.root0
pci11: <PCI bus> [tentative] on pcib2
pci11: domain=0, physical bus=11
found-> vendor=0x14e4, dev=0x4311, revid=0x01
domain=0, bus=11, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0011[LEGDEV]
map[10]: type Memory, range 32, base 0xfe8fc000, size 14, enabled
pcib2: requested memory range 0xfe8fc000-0xfe8fffff: good
pci11: <network> (vendor 0x14e4, dev 0x4311) at device 0.0 irq 10
pci11: <PCI bus> [attached!] on pcib2
pcib2: <PCI-PCI bridge> [attached!] at device 5.0 on pci0
pcib3.pci0.pcib0.legacy0.nexus0.root0
pcib3: <PCI-PCI bridge> [tentative] at device 6.0 on pci0
pcib3: domain 0
pcib3: secondary bus 9
pcib3: subordinate bus 9
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfe700000-0xfe7fffff
pcib3: no prefetched decode
pci9.pcib3.pci0.pcib0.legacy0.nexus0.root0
pci9: <PCI bus> [tentative] on pcib3
pci9: domain=0, physical bus=9
found-> vendor=0x14e4, dev=0x1673, revid=0x02
domain=0, bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
PCI Express ver.1 cap=0x0001[DEVICE]
map[10]: type Memory, range 64, base 0xfe7f0000, size 16, enabled
pcib3: requested memory range 0xfe7f0000-0xfe7fffff: good
bge0.pci9.pcib3.pci0.pcib0.legacy0.nexus0.root0
bge0: <Broadcom BCM5755M Gigabit Ethernet> [tentative] mem 0xfe7f0000-0xfe7fffff irq 9 at device 0.0 on pci9
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfe7f0000
bge0: adjust device control 0x2000 -> 0x5000
bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
bge0: Disabling fastboot
alignment check failed
miibus0.bge0.pci9.pcib3.pci0.pcib0.legacy0.nexus0.root0
miibus0: <MII bus> [tentative] on bge0
brgphy0.miibus0.bge0.pci9.pcib3.pci0.pcib0.legacy0.nexus0.root0
brgphy0: <BCM5755 10/100/1000baseT PHY> [tentative] on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
brgphy0: <BCM5755 10/100/1000baseT PHY> [attached!] on miibus0
miibus0: <MII bus> [attached!] on bge0
bge0: bpf attached
bge0: MAC address: 00:1d:09:cd:9c:90
bge0: <Broadcom BCM5755M Gigabit Ethernet> [attached!] mem 0xfe7f0000-0xfe7fffff irq 9 at device 0.0 on pci9
pci9: <PCI bus> [attached!] on pcib3
pcib3: <PCI-PCI bridge> [attached!] at device 6.0 on pci0
ahci0.pci0.pcib0.legacy0.nexus0.root0
ahci0: <ATI-SB600-SATA> [tentative] port 0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 18.0 on pci0
ahci0: Lazy allocation of 0x400 bytes rid 0x24 type 3 at 0x80000000
ahci0: AHCI 1.1 capabilities 0xf722ff83<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SPM,PMD,SSC,PSC,CCCS>, 4 ports, 32 tags/port, gen 1 (1.5Gbps) and 2 (3Gbps)
ahci0.0: START HARDRESET
ahci0.1: START HARDRESET
ahci0.2: START HARDRESET
ahci0.3: START HARDRESET
ahci0.0: Transient Errors: 400000<PRCS>
ahci0.0: Restart 00000002
ahci0.1: Port appears to be unplugged
ahci0.1: No device detected
ahci0.2: Port appears to be unplugged
ahci0.2: No device detected
ahci0.3: Port appears to be unplugged
ahci0.3: No device detected
ahci0.1: END HARDRESET 19
ahci0.2: END HARDRESET 19
ahci0.3: END HARDRESET 19
ahci0.0.15: Poll timeout slot 1 CMD: 62016<HPCP,PMA,MPSS,FRE,POD,SUD> TFD: 0x150 SERR: c0000<DIAG.B,DIAG.W>
ahci0.0: PMPROBE First FIS failed
ahci0.0.15: Poll timeout slot 1 CMD: 6a117<HPCP,PMA,CR,MPSS,FRE,POD,SUD,ST> TFD: 0x1d0<BSY> SERR: 0
ahci0.0: PMPROBE Second FIS failed
ahci0.0: END HARDRESET 0
ahci0.0: START SOFTRESET 4a017<HPCP,CR,MPSS,FRE,POD,SUD,ST>
ahci0.0: sig 00000101
ahci0.0: END SOFTRESET
ahci0.0: Found DISK "Hitachi HTS722012K9A300 DCCOCA1H" serial="080410DP1C30DJGHJBVP"
ahci0.0: tags=32/32 satacap=1706 satafea=005e NCQ=YES capacity=114473.46MB
ahci0.0: f85=7469 f86=be49 f87=4163 WC=enabled RA=enabled SEC=frozen
(probe0:ahci0:0:1:0): error 22
(probe0:ahci0:0:1:0): Unretryable Error
(probe0:ahci0:0:2:0): error 22
(probe0:ahci0:0:2:0): Unretryable Error
(probe0:ahci0:0:3:0): error 22
(probe0:ahci0:0:3:0): Unretryable Error
(probe0:ahci0:0:4:0): error 22
(probe0:ahci0:0:4:0): Unretryable Error
(probe0:ahci0:0:5:0): error 22
(probe0:ahci0:0:5:0): Unretryable Error
(probe0:ahci0:0:6:0): error 22
(probe0:ahci0:0:6:0): Unretryable Error
(probe0:ahci0:0:7:0): error 22
(probe0:ahci0:0:7:0): Unretryable Error
(probe0:ahci0:0:8:0): error 22
(probe0:ahci0:0:8:0): Unretryable Error
(probe0:ahci0:0:9:0): error 22
(probe0:ahci0:0:9:0): Unretryable Error
(probe0:ahci0:0:10:0): error 22
(probe0:ahci0:0:10:0): Unretryable Error
(probe0:ahci0:0:11:0): error 22
(probe0:ahci0:0:11:0): Unretryable Error
(probe0:ahci0:0:12:0): error 22
(probe0:ahci0:0:12:0): Unretryable Error
(probe0:ahci0:0:13:0): error 22
(probe0:ahci0:0:13:0): Unretryable Error
(probe0:ahci0:0:14:0): error 22
(probe0:ahci0:0:14:0): Unretryable Error
(probe0:ahci0:1:0:0): error 22
(probe0:ahci0:1:0:0): Unretryable Error
(probe0:ahci0:1:1:0): error 22
(probe0:ahci0:1:1:0): Unretryable Error
(probe0:ahci0:1:2:0): error 22
(probe0:ahci0:1:2:0): Unretryable Error
(probe0:ahci0:1:3:0): error 22
(probe0:ahci0:1:3:0): Unretryable Error
(probe0:ahci0:1:4:0): error 22
(probe0:ahci0:1:4:0): Unretryable Error
(probe0:ahci0:1:5:0): error 22
(probe0:ahci0:1:5:0): Unretryable Error
(probe0:ahci0:1:6:0): error 22
(probe0:ahci0:1:6:0): Unretryable Error
(probe0:ahci0:1:7:0): error 22
(probe0:ahci0:1:7:0): Unretryable Error
(probe0:ahci0:1:8:0): error 22
(probe0:ahci0:1:8:0): Unretryable Error
(probe0:ahci0:1:9:0): error 22
(probe0:ahci0:1:9:0): Unretryable Error
(probe0:ahci0:1:10:0): error 22
(probe0:ahci0:1:10:0): Unretryable Error
(probe0:ahci0:1:11:0): error 22
(probe0:ahci0:1:11:0): Unretryable Error
(probe0:ahci0:1:12:0): error 22
(probe0:ahci0:1:12:0): Unretryable Error
(probe0:ahci0:1:13:0): error 22
(probe0:ahci0:1:13:0): Unretryable Error
(probe0:ahci0:1:14:0): error 22
(probe0:ahci0:1:14:0): Unretryable Error
(probe0:ahci0:2:0:0): error 22
(probe0:ahci0:2:0:0): Unretryable Error
(probe0:ahci0:2:1:0): error 22
(probe0:ahci0:2:1:0): Unretryable Error
(probe0:ahci0:2:2:0): error 22
(probe0:ahci0:2:2:0): Unretryable Error
(probe0:ahci0:2:3:0): error 22
(probe0:ahci0:2:3:0): Unretryable Error
(probe0:ahci0:2:4:0): error 22
(probe0:ahci0:2:4:0): Unretryable Error
(probe0:ahci0:2:5:0): error 22
(probe0:ahci0:2:5:0): Unretryable Error
(probe0:ahci0:2:6:0): error 22
(probe0:ahci0:2:6:0): Unretryable Error
(probe0:ahci0:2:7:0): error 22
(probe0:ahci0:2:7:0): Unretryable Error
(probe0:ahci0:2:8:0): error 22
(probe0:ahci0:2:8:0): Unretryable Error
(probe0:ahci0:2:9:0): error 22
(probe0:ahci0:2:9:0): Unretryable Error
(probe0:ahci0:2:10:0): error 22
(probe0:ahci0:2:10:0): Unretryable Error
(probe0:ahci0:2:11:0): error 22
(probe0:ahci0:2:11:0): Unretryable Error
(probe0:ahci0:2:12:0): error 22
(probe0:ahci0:2:12:0): Unretryable Error
(probe0:ahci0:2:13:0): error 22
(probe0:ahci0:2:13:0): Unretryable Error
(probe0:ahci0:2:14:0): error 22
(probe0:ahci0:2:14:0): Unretryable Error
(probe0:ahci0:3:0:0): error 22
(probe0:ahci0:3:0:0): Unretryable Error
(probe0:ahci0:3:1:0): error 22
(probe0:ahci0:3:1:0): Unretryable Error
(probe0:ahci0:3:2:0): error 22
(probe0:ahci0:3:2:0): Unretryable Error
(probe0:ahci0:3:3:0): error 22
(probe0:ahci0:3:3:0): Unretryable Error
(probe0:ahci0:3:4:0): error 22
(probe0:ahci0:3:4:0): Unretryable Error
(probe0:ahci0:3:5:0): error 22
(probe0:ahci0:3:5:0): Unretryable Error
(probe0:ahci0:3:6:0): error 22
(probe0:ahci0:3:6:0): Unretryable Error
(probe0:ahci0:3:7:0): error 22
(probe0:ahci0:3:7:0): Unretryable Error
(probe0:ahci0:3:8:0): error 22
(probe0:ahci0:3:8:0): Unretryable Error
(probe0:ahci0:3:9:0): error 22
(probe0:ahci0:3:9:0): Unretryable Error
(probe0:ahci0:3:10:0): error 22
(probe0:ahci0:3:10:0): Unretryable Error
(probe0:ahci0:3:11:0): error 22
(probe0:ahci0:3:11:0): Unretryable Error
(probe0:ahci0:3:12:0): error 22
(probe0:ahci0:3:12:0): Unretryable Error
(probe0:ahci0:3:13:0): error 22
(probe0:ahci0:3:13:0): Unretryable Error
(probe0:ahci0:3:14:0): error 22
(probe0:ahci0:3:14:0): Unretryable Error
ahci0: <ATI-SB600-SATA> [attached!] port 0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 mem 0x80000000-0x800003ff irq 10 at device 18.0 on pci0
ohci0.pci0.pcib0.legacy0.nexus0.root0
ohci0: <OHCI (generic) USB controller> [tentative] mem 0xffb00000-0xffb00fff irq 11 at device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xffb00000
usb0: OHCI version 1.0, legacy support
usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0
usb0: <OHCI (generic) USB controller> [tentative] on ohci0
usb0: USB revision 1.0
uhub0.usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <OHCI (generic) USB controller> [attached!] on ohci0
ohci0: <OHCI (generic) USB controller> [attached!] mem 0xffb00000-0xffb00fff irq 11 at device 19.0 on pci0
ohci1.pci0.pcib0.legacy0.nexus0.root0
ohci1: <OHCI (generic) USB controller> [tentative] mem 0xffb01000-0xffb01fff irq 10 at device 19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xffb01000
usb1: OHCI version 1.0, legacy support
usb1.ohci1.pci0.pcib0.legacy0.nexus0.root0
usb1: <OHCI (generic) USB controller> [tentative] on ohci1
usb1: USB revision 1.0
uhub1.usb1.ohci1.pci0.pcib0.legacy0.nexus0.root0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <OHCI (generic) USB controller> [attached!] on ohci1
ohci1: <OHCI (generic) USB controller> [attached!] mem 0xffb01000-0xffb01fff irq 10 at device 19.1 on pci0
ohci2.pci0.pcib0.legacy0.nexus0.root0
ohci2: <OHCI (generic) USB controller> [tentative] mem 0xffb02000-0xffb02fff irq 9 at device 19.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xffb02000
usb2: OHCI version 1.0, legacy support
usb2.ohci2.pci0.pcib0.legacy0.nexus0.root0
usb2: <OHCI (generic) USB controller> [tentative] on ohci2
usb2: USB revision 1.0
uhub2.usb2.ohci2.pci0.pcib0.legacy0.nexus0.root0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <OHCI (generic) USB controller> [attached!] on ohci2
ohci2: <OHCI (generic) USB controller> [attached!] mem 0xffb02000-0xffb02fff irq 9 at device 19.2 on pci0
ohci3.pci0.pcib0.legacy0.nexus0.root0
ohci3: <OHCI (generic) USB controller> [tentative] mem 0xffb03000-0xffb03fff irq 10 at device 19.3 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xffb03000
usb3: OHCI version 1.0, legacy support
usb3.ohci3.pci0.pcib0.legacy0.nexus0.root0
usb3: <OHCI (generic) USB controller> [tentative] on ohci3
usb3: USB revision 1.0
uhub3.usb3.ohci3.pci0.pcib0.legacy0.nexus0.root0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <OHCI (generic) USB controller> [attached!] on ohci3
ohci3: <OHCI (generic) USB controller> [attached!] mem 0xffb03000-0xffb03fff irq 10 at device 19.3 on pci0
ohci4.pci0.pcib0.legacy0.nexus0.root0
ohci4: <OHCI (generic) USB controller> [tentative] mem 0xffb04000-0xffb04fff irq 9 at device 19.4 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xffb04000
usb4: OHCI version 1.0, legacy support
usb4.ohci4.pci0.pcib0.legacy0.nexus0.root0
usb4: <OHCI (generic) USB controller> [tentative] on ohci4
usb4: USB revision 1.0
uhub4.usb4.ohci4.pci0.pcib0.legacy0.nexus0.root0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb4
uhub4: 2 ports with 2 removable, self powered
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb4
usb4: <OHCI (generic) USB controller> [attached!] on ohci4
ohci4: <OHCI (generic) USB controller> [attached!] mem 0xffb04000-0xffb04fff irq 9 at device 19.4 on pci0
pci0: <serial bus, USB> (vendor 0x1002, dev 0x4386) at device 19.5 irq 5
pci0: <serial bus, SMBus> (vendor 0x1002, dev 0x4385) at device 20.0
atapci0.pci0.pcib0.legacy0.nexus0.root0
atapci0: <ATI SB600 UDMA133 controller> [tentative] port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 20.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
ata0.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER>
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on SB600 chip
acd0: setting UDMA33 on SB600 chip
uhub0: device problem (SET_ADDR_FAILED), disabling port 1
acd0: <TSSTcorp DVD+/-RW TS-L632H/D300> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <ATI SB600 UDMA133 controller> [attached!] port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 20.1 on pci0
pci0: <multimedia, HDA> (vendor 0x1002, dev 0x4383) at device 20.2 irq 11
isab0.pci0.pcib0.legacy0.nexus0.root0
isab0: <PCI-ISA bridge> [tentative] at device 20.3 on pci0
isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI-ISA bridge> [attached!] at device 20.3 on pci0
pcib4.pci0.pcib0.legacy0.nexus0.root0
pcib4: <PCI-PCI bridge> [tentative] at device 20.4 on pci0
pcib4: domain 0
pcib4: secondary bus 3
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xfe600000-0xfe6fffff
pcib4: no prefetched decode
pcib4: Subtractively decoded bridge.
pci3.pcib4.pci0.pcib0.legacy0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib4
pci3: domain=0, physical bus=3
found-> vendor=0x1217, dev=0x7135, revid=0x21
domain=0, bus=3, slot=1, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0, size 12, memory disabled
found-> vendor=0x1217, dev=0x00f7, revid=0x02
domain=0, bus=3, slot=1, func=4
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe6ff000, size 12, enabled
pcib4: requested memory range 0xfe6ff000-0xfe6fffff: good
map[14]: type Memory, range 32, base 0xfe6fe800, size 11, enabled
pcib4: requested memory range 0xfe6fe800-0xfe6fefff: good
cbb0.pci3.pcib4.pci0.pcib0.legacy0.nexus0.root0
cbb0: <PCI-CardBus Bridge> [tentative] at device 1.0 on pci3
pcib4: cbb0 requested memory range 0xfe600000-0xfe6fffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xfe600000
cardbus0.cbb0.pci3.pcib4.pci0.pcib0.legacy0.nexus0.root0
cardbus0: <CardBus bus> [tentative] on cbb0
cardbus0: <CardBus bus> [attached!] on cbb0
pccard0.cbb0.pci3.pcib4.pci0.pcib0.legacy0.nexus0.root0
pccard0: <16-bit PCCard bus> [tentative] on cbb0
pccard0: <16-bit PCCard bus> [attached!] on cbb0
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
fwohci0: vendor=1217, dev=f7
fwohci0.pci3.pcib4.pci0.pcib0.legacy0.nexus0.root0
fwohci0: <1394 Open Host Controller Interface> [tentative] mem 0xfe6fe800-0xfe6fefff,0xfe6ff000-0xfe6fffff irq 5 at device 1.4 on pci3
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 16 -> 16.
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe6ff000
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 37:4f:c0:00:26:29:d0:70
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0.fwohci0.pci3.pcib4.pci0.pcib0.legacy0.nexus0.root0
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
fwe0.firewire0.fwohci0.pci3.pcib4.pci0.pcib0.legacy0.nexus0.root0
fwe0: <Ethernet over FireWire> [tentative] on firewire0
fwe0: bpf attached
fwe0: MAC address: 36:4f:c0:29:d0:70
fwe0: <Ethernet over FireWire> [attached!] on firewire0
sbp0.firewire0.fwohci0.pci3.pcib4.pci0.pcib0.legacy0.nexus0.root0
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
sbp_attach (cold=1)
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=ee
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
6fbf6000 OUTL ST2 ALL ALL 12 00000000 6fbf6080 8411:0004 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
fwohci0: <1394 Open Host Controller Interface> [attached!] mem 0xfe6fe800-0xfe6fefff,0xfe6ff000-0xfe6fffff irq 5 at device 1.4 on pci3
pci3: <PCI bus> [attached!] on pcib4
pcib4: <PCI-PCI bridge> [attached!] at device 20.4 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] pcibus 0 on motherboard
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
atkbdc-: atkbdc0 exists, using next available unit number
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00 on isa0
it2 [tentative] failed to probe at port 0xd00 on isa0
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio2: can't drain, serial port might not exist, disabling
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio3: not probed (disabled)
sio4: not probed (disabled)
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
bus_explore done
sbp_post_explore
sl0: bpf attached
faith0: bpf attached
lo0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
sched_ithd: stray interrupt 7 on cpu 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
ppp0: bpf attached
ip: MPSAFE
arp: MPSAFE
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ata0
CAM: Configuring bus: ata1
CAM: Configuring bus: sbp0
CAM: Configuring 7 busses
(probe1:ahci0:0:1:0): error 22
(probe1:ahci0:0:1:0): Unretryable Error
(probe1:ahci0:0:2:0): error 22
(probe1:ahci0:0:2:0): Unretryable Error
(probe1:ahci0:0:3:0): error 22
(probe1:ahci0:0:3:0): Unretryable Error
(probe1:ahci0:0:4:0): error 22
(probe1:ahci0:0:4:0): Unretryable Error
(probe1:ahci0:0:5:0): error 22
(probe1:ahci0:0:5:0): Unretryable Error
(probe1:ahci0:0:6:0): error 22
(probe1:ahci0:0:6:0): Unretryable Error
(probe1:ahci0:0:7:0): error 22
(probe1:ahci0:0:7:0): Unretryable Error
(probe1:ahci0:0:8:0): error 22
(probe1:ahci0:0:8:0): Unretryable Error
(probe1:ahci0:0:9:0): error 22
(probe1:ahci0:0:9:0): Unretryable Error
(probe1:ahci0:0:10:0): error 22
(probe1:ahci0:0:10:0): Unretryable Error
(probe1:ahci0:0:11:0): error 22
(probe1:ahci0:0:11:0): Unretryable Error
(probe1:ahci0:0:12:0): error 22
(probe1:ahci0:0:12:0): Unretryable Error
(probe1:ahci0:0:13:0): error 22
(probe1:ahci0:0:13:0): Unretryable Error
(probe1:ahci0:0:14:0): error 22
(probe1:ahci0:0:14:0): Unretryable Error
CAM: Finished configuring bus: ahci0
(probe1:ahci0:1:0:0): error 22
(probe1:ahci0:1:0:0): Unretryable Error
(probe1:ahci0:1:1:0): error 22
(probe1:ahci0:1:1:0): Unretryable Error
(probe1:ahci0:1:2:0): error 22
(probe1:ahci0:1:2:0): Unretryable Error
(probe1:ahci0:1:3:0): error 22
(probe1:ahci0:1:3:0): Unretryable Error
(probe1:ahci0:1:4:0): error 22
(probe1:ahci0:1:4:0): Unretryable Error
(probe1:ahci0:1:5:0): error 22
(probe1:ahci0:1:5:0): Unretryable Error
(probe1:ahci0:1:6:0): error 22
(probe1:ahci0:1:6:0): Unretryable Error
(probe1:ahci0:1:7:0): error 22
(probe1:ahci0:1:7:0): Unretryable Error
(probe1:ahci0:1:8:0): error 22
(probe1:ahci0:1:8:0): Unretryable Error
(probe1:ahci0:1:9:0): error 22
(probe1:ahci0:1:9:0): Unretryable Error
(probe1:ahci0:1:10:0): error 22
(probe1:ahci0:1:10:0): Unretryable Error
(probe1:ahci0:1:11:0): error 22
(probe1:ahci0:1:11:0): Unretryable Error
(probe1:ahci0:1:12:0): error 22
(probe1:ahci0:1:12:0): Unretryable Error
(probe1:ahci0:1:13:0): error 22
(probe1:ahci0:1:13:0): Unretryable Error
(probe1:ahci0:1:14:0): error 22
(probe1:ahci0:1:14:0): Unretryable Error
CAM: Finished configuring bus: ahci0
(probe1:ahci0:2:0:0): error 22
(probe1:ahci0:2:0:0): Unretryable Error
(probe1:ahci0:2:1:0): error 22
(probe1:ahci0:2:1:0): Unretryable Error
(probe1:ahci0:2:2:0): error 22
(probe1:ahci0:2:2:0): Unretryable Error
(probe1:ahci0:2:3:0): error 22
(probe1:ahci0:2:3:0): Unretryable Error
(probe1:ahci0:2:4:0): error 22
(probe1:ahci0:2:4:0): Unretryable Error
(probe1:ahci0:2:5:0): error 22
(probe1:ahci0:2:5:0): Unretryable Error
(probe1:ahci0:2:6:0): error 22
(probe1:ahci0:2:6:0): Unretryable Error
(probe1:ahci0:2:7:0): error 22
(probe1:ahci0:2:7:0): Unretryable Error
(probe1:ahci0:2:8:0): error 22
(probe1:ahci0:2:8:0): Unretryable Error
(probe1:ahci0:2:9:0): error 22
(probe1:ahci0:2:9:0): Unretryable Error
(probe1:ahci0:2:10:0): error 22
(probe1:ahci0:2:10:0): Unretryable Error
(probe1:ahci0:2:11:0): error 22
(probe1:ahci0:2:11:0): Unretryable Error
(probe1:ahci0:2:12:0): error 22
(probe1:ahci0:2:12:0): Unretryable Error
(probe1:ahci0:2:13:0): error 22
(probe1:ahci0:2:13:0): Unretryable Error
(probe1:ahci0:2:14:0): error 22
(probe1:ahci0:2:14:0): Unretryable Error
CAM: Finished configuring bus: ahci0
(probe1:ahci0:3:0:0): error 22
(probe1:ahci0:3:0:0): Unretryable Error
(probe1:ahci0:3:1:0): error 22
(probe1:ahci0:3:1:0): Unretryable Error
(probe1:ahci0:3:2:0): error 22
(probe1:ahci0:3:2:0): Unretryable Error
(probe1:ahci0:3:3:0): error 22
(probe1:ahci0:3:3:0): Unretryable Error
(probe1:ahci0:3:4:0): error 22
(probe1:ahci0:3:4:0): Unretryable Error
(probe1:ahci0:3:5:0): error 22
(probe1:ahci0:3:5:0): Unretryable Error
(probe1:ahci0:3:6:0): error 22
(probe1:ahci0:3:6:0): Unretryable Error
(probe1:ahci0:3:7:0): error 22
(probe1:ahci0:3:7:0): Unretryable Error
(probe1:ahci0:3:8:0): error 22
(probe1:ahci0:3:8:0): Unretryable Error
(probe1:ahci0:3:9:0): error 22
(probe1:ahci0:3:9:0): Unretryable Error
(probe1:ahci0:3:10:0): error 22
(probe1:ahci0:3:10:0): Unretryable Error
(probe1:ahci0:3:11:0): error 22
(probe1:ahci0:3:11:0): Unretryable Error
(probe1:ahci0:3:12:0): error 22
(probe1:ahci0:3:12:0): Unretryable Error
(probe1:ahci0:3:13:0): error 22
(probe1:ahci0:3:13:0): Unretryable Error
(probe1:ahci0:3:14:0): error 22
(probe1:ahci0:3:14:0): Unretryable Error
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ata1
(probe0:ata0:0:0:0): error 6
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
CAM: Finished configuring bus: ata0
(probe1:sbp0:0:0:0): error 22
(probe1:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:1:0): error 22
(probe2:sbp0:0:1:0): Unretryable Error
(probe3:sbp0:0:2:0): error 22
(probe3:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:3:0): error 22
(probe4:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:4:0): error 22
(probe5:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:5:0): error 22
(probe6:sbp0:0:5:0): Unretryable Error
(probe7:sbp0:0:6:0): error 22
(probe7:sbp0:0:6:0): Unretryable Error
CAM: Finished configuring bus: sbp0
CAM: finished configuring all busses (0 left)
pass0 at ahci0 bus 0 target 0 lun 0
pass0: <SATA Hitachi HTS72201 DCCO> Fixed Direct Access SCSI-4 device
pass0: Serial Number 080410DP1C30DJGHJBVP
pass0: 300.000MB/s transfers
pass1 at ata0 bus 0 target 0 lun 0
pass1: <TSSTcorp DVD+-RW TS-L632H D300> Removable CD-ROM SCSI-0 device
pass1: 33.000MB/s transfers
sg0 at ahci0 bus 0 target 0 lun 0
sg0: <SATA Hitachi HTS72201 DCCO> Fixed Direct Access SCSI-4 device
sg0: Serial Number 080410DP1C30DJGHJBVP
sg0: 300.000MB/s transfers
sg1 at ata0 bus 0 target 0 lun 0
sg1: <TSSTcorp DVD+-RW TS-L632H D300> Removable CD-ROM SCSI-0 device
sg1: 33.000MB/s transfers
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA Hitachi HTS72201 DCCO> Fixed Direct Access SCSI-4 device
da0: Serial Number 080410DP1C30DJGHJBVP
da0: 300.000MB/s transfers
da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
no B_DEVMAGIC (bootdev=0)
ATA PseudoRAID loaded
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-L632H D300> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0: type 0xa5, start 63, end = 234436607, size 234436545 : OK
Mounting root from hammer:serno/080410DP1C30DJGHJBVP.s1d
tryroot serno/080410DP1C30DJGHJBVP.s1d
Mounting devfs
start_init: trying /sbin/init
rum0.uhub0.usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0
rum0: <Ralink 802.11 bg WLAN, class 0/0, rev 2.00/0.01, addr 2> [tentative] on uhub0
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:24:01:a6:1c:8e
rum0: bpf attached
rum0: MAC address: 00:24:01:a6:1c:8e
rum0: bpf attached
rum0: bpf attached
rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
rum0: <Ralink 802.11 bg WLAN, class 0/0, rev 2.00/0.01, addr 2> [attached!] on uhub0
pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x02061028 chip=0x79101002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RS690 Host Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x02061028 chip=0x79121002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RS690 PCI to PCI Bridge (Internal gfx)'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:5:0: class=0x060400 card=0x02061028 chip=0x79151002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RS690 PCI to PCI Bridge (PCI Express Port 1)'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:6:0: class=0x060400 card=0x02061028 chip=0x79161002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RS690 PCI to PCI Bridge (PCI Express Port 2)'
class = bridge
subclass = PCI-PCI
ahci0@pci0:0:18:0: class=0x01018f card=0x02061028 chip=0x43801002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 Serial ATA Controller'
class = mass storage
subclass = ATA
ohci0@pci0:0:19:0: class=0x0c0310 card=0x02061028 chip=0x43871002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 USB Controller (OHCI0)'
class = serial bus
subclass = USB
ohci1@pci0:0:19:1: class=0x0c0310 card=0x02061028 chip=0x43881002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 USB Controller (OHCI1)'
class = serial bus
subclass = USB
ohci2@pci0:0:19:2: class=0x0c0310 card=0x02061028 chip=0x43891002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 USB Controller (OHCI2)'
class = serial bus
subclass = USB
ohci3@pci0:0:19:3: class=0x0c0310 card=0x02061028 chip=0x438a1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 USB Controller (OHCI3)'
class = serial bus
subclass = USB
ohci4@pci0:0:19:4: class=0x0c0310 card=0x02061028 chip=0x438b1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 USB Controller (OHCI4)'
class = serial bus
subclass = USB
none0@pci0:0:19:5: class=0x0c0320 card=0x02061028 chip=0x43861002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 USB Controller (EHCI)'
class = serial bus
subclass = USB
none1@pci0:0:20:0: class=0x0c0500 card=0x02061028 chip=0x43851002 rev=0x14 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 SMBUS Controller'
class = serial bus
subclass = SMBus
atapci0@pci0:0:20:1: class=0x01018a card=0x02061028 chip=0x438c1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RD600/RS600 ATI RD600/RS600 IDE Controller'
class = mass storage
subclass = ATA
none2@pci0:0:20:2: class=0x040300 card=0x02061028 chip=0x43831002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 High Definition Audio Controller'
class = multimedia
subclass = HDA
isab0@pci0:0:20:3: class=0x060100 card=0x02061028 chip=0x438d1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = '1043.4.0.0 ATK0110 ACPI Utility'
class = bridge
subclass = PCI-ISA
pcib4@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon64/Opteron/Sempron (K8 Family) Address Map'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous Control'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:1:5:0: class=0x030000 card=0x02061028 chip=0x791f1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RS690 ATI Mobility Radeon x1250'
class = display
subclass = VGA
none3@pci0:11:0:0: class=0x028000 card=0x00071028 chip=0x431114e4 rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM4311 Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card'
class = network
bge0@pci0:9:0:0: class=0x020000 card=0x02061028 chip=0x167314e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
class = network
subclass = ethernet
cbb0@pci0:3:1:0: class=0x060700 card=0x02061028 chip=0x71351217 rev=0x21 hdr=0x02
vendor = 'O2 Micro Inc'
device = 'OZ711EZ1 MemoryCardBus Controller'
class = bridge
subclass = PCI-CardBus
fwohci0@pci0:3:1:4: class=0x0c0010 card=0x00f71217 chip=0x00f71217 rev=0x02 hdr=0x00
vendor = 'O2 Micro Inc'
device = '0x00f71217 1394 Open Host Controller Interface'
class = serial bus
subclass = FireWire
